Re: [PATCH V2 9/9] i2c: tegra: Add pinctrl support

[Stephen Warren <swarren@wwwdotorg.org>]

On 08/26/2016 07:09 AM, Jon Hunter wrote:
> On Tegra124/132 the pins for I2C6 are shared with the Display Port AUX
> (DPAUX) channel and on Tegra210 the pins for I2C4 and I2C6 are shared
> with DPAUX1 and DPAUX0, respectively. The multiplexing of the pins is
> handled by a register in the DPAUX and so the Tegra DPAUX driver has
> been updated to register a pinctrl device for managing these pins.
>
> The pins for these particular I2C devices are bound to the I2C device
> prior to probing. However, these I2C devices are in a different power
> partition to the DPAUX devices that own the pins. Hence, it is desirable
> to place the pins in the 'idle' state and allow the DPAUX power
> partition to switch off, when these I2C devices is not in use.
> Therefore, add calls to place the I2C pins in the 'default' and 'idle'
> states when the I2C device is runtime resumed and suspended,
> respectively.
>
> Please note that the pinctrl functions that set the state of the pins
> check to see if the devices has pins associated and will return zero
> if they do not. Therefore, it is safe to call these pinctrl functions
> even for I2C devices that do not have any pins associated.

I think this should be handled by drivers/i2c/muxes/i2c-mux-pinctrl.c 
instead?