mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Ezequiel Garcia <ezequiel@collabora.com>,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Hans Verkuil <hans.verkuil@cisco.com>,
	Nicolas Dufresne <nicolas.dufresne@collabora.com>,
	Tomasz Figa <tfiga@chromium.org>,
	Alexandre Courbot <acourbot@chromium.org>
Subject: Re: [PATCH 1/9] media: rkvdec: h264: Support profile and level controls
Date: Fri, 03 Jul 2020 05:30:27 +0000 (UTC)	[thread overview]
Message-ID: <75d272ab-2d48-6dc6-3b60-22d5922ffd1e@kwiboo.se> (raw)
In-Reply-To: <8daa49704a14764bfe0797cbf802bad3d64ede17.camel@collabora.com>

On 2020-07-03 04:54, Ezequiel Garcia wrote:
> On Wed, 2020-07-01 at 21:56 +0000, Jonas Karlman wrote:
>> The Rockchip Video Decoder used in RK3399 supports H.264 profiles from
>> Baseline to High 4:2:2 up to Level 5.1, except for the Extended profile.
>>
>> Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE and the
>> V4L2_CID_MPEG_VIDEO_H264_LEVEL control, so that userspace can query the
>> driver for the list of supported profiles and level.
>>
>> In current state only Baseline to High profile is supported by the driver.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> 
> I think the patch is good so:
> 
> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
> 
> However, feel free to just drop this patch and support the profiles
> and levels at the end of the patchset, once High 10 and High 422
> support is there.

Sure, that makes more sense, will move to end in v2.

Regards,
Jonas

> 
> Thanks,
> Ezequiel
> 
>> ---
>>  drivers/staging/media/rkvdec/rkvdec.c | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
>> index 0f81b47792f6..b1de55aa6535 100644
>> --- a/drivers/staging/media/rkvdec/rkvdec.c
>> +++ b/drivers/staging/media/rkvdec/rkvdec.c
>> @@ -94,6 +94,19 @@ static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
>>  		.cfg.def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
>>  		.cfg.max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
>>  	},
>> +	{
>> +		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
>> +		.cfg.min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
>> +		.cfg.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
>> +		.cfg.menu_skip_mask =
>> +			BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
>> +		.cfg.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
>> +	},
>> +	{
>> +		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
>> +		.cfg.min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
>> +		.cfg.max = V4L2_MPEG_VIDEO_H264_LEVEL_5_1,
>> +	},
>>  };
>>  
>>  static const struct rkvdec_ctrls rkvdec_h264_ctrls = {
> 
> 

  reply	other threads:[~2020-07-03  5:30 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01 21:56 [PATCH 0/9] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman
2020-07-01 21:56 ` [PATCH 1/9] media: rkvdec: h264: Support profile and level controls Jonas Karlman
2020-07-03  2:54   ` Ezequiel Garcia
2020-07-03  5:30     ` Jonas Karlman [this message]
2020-07-01 21:56 ` [PATCH 2/9] media: rkvdec: h264: Fix reference frame_num wrap for second field Jonas Karlman
2020-07-03  2:55   ` Ezequiel Garcia
2020-07-03  3:01   ` Ezequiel Garcia
2020-07-01 21:56 ` [PATCH 3/9] media: rkvdec: h264: Fix pic width and height in mbs Jonas Karlman
2020-07-03  2:48   ` Ezequiel Garcia
2020-07-03 11:28     ` Jonas Karlman
2020-07-01 21:56 ` [PATCH 5/9] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2020-07-01 21:56 ` [PATCH 4/9] media: rkvdec: h264: Fix bit depth wrap in pps packet Jonas Karlman
2020-07-03  2:58   ` Ezequiel Garcia
2020-07-01 21:56 ` [PATCH 6/9] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2020-07-01 21:56 ` [PATCH 7/9] media: rkvdec: h264: Use bytesperline and buffer height to calculate stride Jonas Karlman
2020-07-03  3:21   ` Ezequiel Garcia
2020-07-03 11:40     ` Jonas Karlman
2020-07-01 21:56 ` [PATCH 9/9] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2020-07-01 21:56 ` [PATCH 8/9] media: rkvdec: Add validate_fmt ops for pixelformat validation Jonas Karlman
2020-07-03  3:14   ` Ezequiel Garcia
2020-07-03  6:55     ` Jonas Karlman
2020-07-03 14:58       ` Ezequiel Garcia
2020-07-03 19:17         ` Jonas Karlman
2020-07-03 19:33           ` Ezequiel Garcia
2020-07-03 19:34           ` Tomasz Figa
2020-07-06 21:54 ` [PATCH v2 00/12] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 01/12] media: rkvdec: h264: Fix reference frame_num wrap for second field Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 02/12] media: rkvdec: Ensure decoded resolution fit coded resolution Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 03/12] media: rkvdec: h264: Validate and use pic width and height in mbs Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 04/12] media: rkvdec: h264: Fix bit depth wrap in pps packet Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 05/12] media: rkvdec: h264: Do not override output buffer sizeimage Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 06/12] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 07/12] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 08/12] media: rkvdec: h264: Use bytesperline and buffer height to calculate stride Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 10/12] media: rkvdec: Lock capture pixel format in s_ctrl and s_fmt Jonas Karlman
2020-07-08  3:16     ` Ezequiel Garcia
2020-07-08 12:42       ` Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 11/12] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 09/12] media: rkvdec: Extract rkvdec_fill_decoded_pixfmt helper method Jonas Karlman
2020-07-06 21:54   ` [PATCH v2 12/12] media: rkvdec: h264: Support profile and level controls Jonas Karlman
2020-07-08  3:19     ` Ezequiel Garcia
2020-07-08  9:34       ` Jonas Karlman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=75d272ab-2d48-6dc6-3b60-22d5922ffd1e@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=acourbot@chromium.org \
    --cc=ezequiel@collabora.com \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®