From: Kirill Tkhai <ktkhai@virtuozzo.com>
To: Bob Liu <bob.liu@oracle.com>,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
martin.petersen@oracle.com, axboe@kernel.dk, agk@redhat.com,
snitzer@redhat.com, dm-devel@redhat.com, song@kernel.org,
tytso@mit.edu, adilger.kernel@dilger.ca,
Chaitanya.Kulkarni@wdc.com, darrick.wong@oracle.com,
ming.lei@redhat.com, osandov@fb.com, jthumshirn@suse.de,
minwoo.im.dev@gmail.com, damien.lemoal@wdc.com,
andrea.parri@amarulasolutions.com, hare@suse.com, tj@kernel.org,
ajay.joshi@wdc.com, sagi@grimberg.me, dsterba@suse.com,
bvanassche@acm.org, dhowells@redhat.com, asml.silence@gmail.com
Subject: Re: [PATCH v5 4/6] block: Add support for REQ_ALLOCATE flag
Date: Mon, 27 Jan 2020 11:33:22 +0300 [thread overview]
Message-ID: <75e959fd-0c84-1a27-9016-994e7998609c@virtuozzo.com> (raw)
In-Reply-To: <b33500eb-8e7c-9e25-b7bc-9309e426cfc3@oracle.com>
On 25.01.2020 06:18, Bob Liu wrote:
> On 1/22/20 6:58 PM, Kirill Tkhai wrote:
>> This adds support for REQ_ALLOCATE extension of REQ_OP_WRITE_ZEROES
>> operation, which encourages a block device driver to just allocate
>> blocks (or mark them allocated) instead of actual blocks zeroing.
>> REQ_ALLOCATE is aimed to be used for network filesystems providing
>> a block device interface. Also, block devices, which map a file
>> on other filesystem (like loop), may use this for less fragmentation
>> and batching fallocate() requests. Hypervisors like QEMU may
>> introduce optimizations of clusters allocations based on this.
>>
>> BLKDEV_ZERO_ALLOCATE is a new corresponding flag for
>> blkdev_issue_zeroout().
>>
>> Stacking devices start from zero max_allocate_sectors limit for now,
>> and the support is going to be implemented separate for each device
>> in the future.
>>
>> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
>> ---
>> block/blk-lib.c | 17 ++++++++++-------
>> block/blk-settings.c | 4 ++++
>> fs/block_dev.c | 4 ++++
>> include/linux/blk_types.h | 5 ++++-
>> include/linux/blkdev.h | 13 ++++++++++---
>> 5 files changed, 32 insertions(+), 11 deletions(-)
>>
>
> This patch and following two are looks fine to me.
> Feel free to add.
> Reviewed-by: Bob Liu <bob.liu@oracle.com>
Thank you, Bob.
Kirill
>> diff --git a/block/blk-lib.c b/block/blk-lib.c
>> index 3e38c93cfc53..9cd6f86523ba 100644
>> --- a/block/blk-lib.c
>> +++ b/block/blk-lib.c
>> @@ -214,7 +214,7 @@ static int __blkdev_issue_write_zeroes(struct block_device *bdev,
>> struct bio **biop, unsigned flags)
>> {
>> struct bio *bio = *biop;
>> - unsigned int max_write_zeroes_sectors;
>> + unsigned int max_write_zeroes_sectors, req_flags = 0;
>> struct request_queue *q = bdev_get_queue(bdev);
>>
>> if (!q)
>> @@ -224,18 +224,21 @@ static int __blkdev_issue_write_zeroes(struct block_device *bdev,
>> return -EPERM;
>>
>> /* Ensure that max_write_zeroes_sectors doesn't overflow bi_size */
>> - max_write_zeroes_sectors = bdev_write_zeroes_sectors(bdev, 0);
>> + max_write_zeroes_sectors = bdev_write_zeroes_sectors(bdev, flags);
>>
>> if (max_write_zeroes_sectors == 0)
>> return -EOPNOTSUPP;
>>
>> + if (flags & BLKDEV_ZERO_NOUNMAP)
>> + req_flags |= REQ_NOUNMAP;
>> + if (flags & BLKDEV_ZERO_ALLOCATE)
>> + req_flags |= REQ_ALLOCATE|REQ_NOUNMAP;
>> +
>> while (nr_sects) {
>> bio = blk_next_bio(bio, 0, gfp_mask);
>> bio->bi_iter.bi_sector = sector;
>> bio_set_dev(bio, bdev);
>> - bio->bi_opf = REQ_OP_WRITE_ZEROES;
>> - if (flags & BLKDEV_ZERO_NOUNMAP)
>> - bio->bi_opf |= REQ_NOUNMAP;
>> + bio->bi_opf = REQ_OP_WRITE_ZEROES | req_flags;
>>
>> if (nr_sects > max_write_zeroes_sectors) {
>> bio->bi_iter.bi_size = max_write_zeroes_sectors << 9;
>> @@ -362,7 +365,7 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
>> sector_t bs_mask;
>> struct bio *bio;
>> struct blk_plug plug;
>> - bool try_write_zeroes = !!bdev_write_zeroes_sectors(bdev, 0);
>> + bool try_write_zeroes = !!bdev_write_zeroes_sectors(bdev, flags);
>>
>> bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
>> if ((sector | nr_sects) & bs_mask)
>> @@ -391,7 +394,7 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
>> try_write_zeroes = false;
>> goto retry;
>> }
>> - if (!bdev_write_zeroes_sectors(bdev, 0)) {
>> + if (!bdev_write_zeroes_sectors(bdev, flags)) {
>> /*
>> * Zeroing offload support was indicated, but the
>> * device reported ILLEGAL REQUEST (for some devices
>> diff --git a/block/blk-settings.c b/block/blk-settings.c
>> index c8eda2e7b91e..8d5df9d37239 100644
>> --- a/block/blk-settings.c
>> +++ b/block/blk-settings.c
>> @@ -48,6 +48,7 @@ void blk_set_default_limits(struct queue_limits *lim)
>> lim->chunk_sectors = 0;
>> lim->max_write_same_sectors = 0;
>> lim->max_write_zeroes_sectors = 0;
>> + lim->max_allocate_sectors = 0;
>> lim->max_discard_sectors = 0;
>> lim->max_hw_discard_sectors = 0;
>> lim->discard_granularity = 0;
>> @@ -83,6 +84,7 @@ void blk_set_stacking_limits(struct queue_limits *lim)
>> lim->max_dev_sectors = UINT_MAX;
>> lim->max_write_same_sectors = UINT_MAX;
>> lim->max_write_zeroes_sectors = UINT_MAX;
>> + lim->max_allocate_sectors = 0;
>> }
>> EXPORT_SYMBOL(blk_set_stacking_limits);
>>
>> @@ -506,6 +508,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
>> b->max_write_same_sectors);
>> t->max_write_zeroes_sectors = min(t->max_write_zeroes_sectors,
>> b->max_write_zeroes_sectors);
>> + t->max_allocate_sectors = min(t->max_allocate_sectors,
>> + b->max_allocate_sectors);
>> t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn);
>>
>> t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
>> diff --git a/fs/block_dev.c b/fs/block_dev.c
>> index 69bf2fb6f7cd..1ffef894b3bd 100644
>> --- a/fs/block_dev.c
>> +++ b/fs/block_dev.c
>> @@ -2122,6 +2122,10 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
>> error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
>> GFP_KERNEL, BLKDEV_ZERO_NOFALLBACK);
>> break;
>> + case FALLOC_FL_KEEP_SIZE:
>> + error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
>> + GFP_KERNEL, BLKDEV_ZERO_ALLOCATE | BLKDEV_ZERO_NOFALLBACK);
>> + break;
>> case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_NO_HIDE_STALE:
>> error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
>> GFP_KERNEL, 0);
>> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
>> index 70254ae11769..86accd2caa4e 100644
>> --- a/include/linux/blk_types.h
>> +++ b/include/linux/blk_types.h
>> @@ -335,7 +335,9 @@ enum req_flag_bits {
>>
>> /* command specific flags for REQ_OP_WRITE_ZEROES: */
>> __REQ_NOUNMAP, /* do not free blocks when zeroing */
>> -
>> + __REQ_ALLOCATE, /* only notify about allocated blocks,
>> + * and do not actually zero them
>> + */
>> __REQ_HIPRI,
>>
>> /* for driver use */
>> @@ -362,6 +364,7 @@ enum req_flag_bits {
>> #define REQ_CGROUP_PUNT (1ULL << __REQ_CGROUP_PUNT)
>>
>> #define REQ_NOUNMAP (1ULL << __REQ_NOUNMAP)
>> +#define REQ_ALLOCATE (1ULL << __REQ_ALLOCATE)
>> #define REQ_HIPRI (1ULL << __REQ_HIPRI)
>>
>> #define REQ_DRV (1ULL << __REQ_DRV)
>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>> index 264202fa3bf8..20c94a7f9411 100644
>> --- a/include/linux/blkdev.h
>> +++ b/include/linux/blkdev.h
>> @@ -337,6 +337,7 @@ struct queue_limits {
>> unsigned int max_hw_discard_sectors;
>> unsigned int max_write_same_sectors;
>> unsigned int max_write_zeroes_sectors;
>> + unsigned int max_allocate_sectors;
>> unsigned int discard_granularity;
>> unsigned int discard_alignment;
>>
>> @@ -991,6 +992,8 @@ static inline struct bio_vec req_bvec(struct request *rq)
>> static inline unsigned int blk_queue_get_max_write_zeroes_sectors(
>> struct request_queue *q, unsigned int op_flags)
>> {
>> + if (op_flags & REQ_ALLOCATE)
>> + return q->limits.max_allocate_sectors;
>> return q->limits.max_write_zeroes_sectors;
>> }
>>
>> @@ -1227,6 +1230,7 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
>>
>> #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
>> #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
>> +#define BLKDEV_ZERO_ALLOCATE (1 << 2) /* allocate range of blocks */
>>
>> extern int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
>> sector_t nr_sects, gfp_t gfp_mask, struct bio **biop,
>> @@ -1431,10 +1435,13 @@ static inline unsigned int bdev_write_zeroes_sectors(struct block_device *bdev,
>> {
>> struct request_queue *q = bdev_get_queue(bdev);
>>
>> - if (q)
>> - return q->limits.max_write_zeroes_sectors;
>> + if (!q)
>> + return 0;
>>
>> - return 0;
>> + if (flags & BLKDEV_ZERO_ALLOCATE)
>> + return q->limits.max_allocate_sectors;
>> + else
>> + return q->limits.max_write_zeroes_sectors;
>> }
>>
>> static inline enum blk_zoned_model bdev_zoned_model(struct block_device *bdev)
>>
>>
>
next prev parent reply other threads:[~2020-01-27 8:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 10:57 [PATCH v5 0/6] block: Introduce REQ_ALLOCATE flag for REQ_OP_WRITE_ZEROES Kirill Tkhai
2020-01-22 10:57 ` [PATCH v5 1/6] block: Add @flags argument to bdev_write_zeroes_sectors() Kirill Tkhai
2020-01-22 10:58 ` [PATCH v5 2/6] block: Pass op_flags into blk_queue_get_max_sectors() Kirill Tkhai
2020-01-25 2:37 ` Bob Liu
2020-01-27 10:08 ` Kirill Tkhai
2020-01-22 10:58 ` [PATCH v5 3/6] block: Introduce blk_queue_get_max_write_zeroes_sectors() Kirill Tkhai
2020-01-25 2:38 ` Bob Liu
2020-01-22 10:58 ` [PATCH v5 4/6] block: Add support for REQ_ALLOCATE flag Kirill Tkhai
2020-01-25 3:18 ` Bob Liu
2020-01-27 8:33 ` Kirill Tkhai [this message]
2020-01-22 10:58 ` [PATCH v5 5/6] block: Add blk_queue_max_allocate_sectors() Kirill Tkhai
2020-01-22 10:58 ` [PATCH v5 6/6] loop: Add support for REQ_ALLOCATE Kirill Tkhai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=75e959fd-0c84-1a27-9016-994e7998609c@virtuozzo.com \
--to=ktkhai@virtuozzo.com \
--cc=Chaitanya.Kulkarni@wdc.com \
--cc=adilger.kernel@dilger.ca \
--cc=agk@redhat.com \
--cc=ajay.joshi@wdc.com \
--cc=andrea.parri@amarulasolutions.com \
--cc=asml.silence@gmail.com \
--cc=axboe@kernel.dk \
--cc=bob.liu@oracle.com \
--cc=bvanassche@acm.org \
--cc=damien.lemoal@wdc.com \
--cc=darrick.wong@oracle.com \
--cc=dhowells@redhat.com \
--cc=dm-devel@redhat.com \
--cc=dsterba@suse.com \
--cc=hare@suse.com \
--cc=jthumshirn@suse.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=ming.lei@redhat.com \
--cc=minwoo.im.dev@gmail.com \
--cc=osandov@fb.com \
--cc=sagi@grimberg.me \
--cc=snitzer@redhat.com \
--cc=song@kernel.org \
--cc=tj@kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®