mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kory Maincent <kory.maincent@bootlin.com>
To: Carlo Szelinsky <github@szelinsky.de>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Piotr Kubik <piotr.kubik@adtran.com>,
	Sai Krishna <saikrishnag@marvell.com>,
	Simon Horman <horms@kernel.org>,
	Kyle Swenson <kyle.swenson@est.tech>,
	netdev-bot+sashiko@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 07/10] net: pse-pd: pd692x0: release the manager power budget through devres
Date: Mon, 19 Oct 2026 14:45:49 +0200	[thread overview]
Message-ID: <76248dfd-a193-4a75-9fb3-771cad207cb4@bootlin.com> (raw)
In-Reply-To: <20261018082314.48950-8-github@szelinsky.de>



On 10/18/26 10:23, Carlo Szelinsky wrote:
> pd692x0 reserves a power budget on each manager's supply in
> setup_pi_matrix(), but gives it back only on that function's own errors
> and in remove(). If probe fails later, or the request fails for one
> manager after others succeeded, the budget stays reserved on vmain. Each
> probe retry, e.g. after -EPROBE_DEFER, reserves it again until nothing
> is left.
> 
> Release the budget from a devm action instead, and drop the explicit
> release calls.

Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>

Thank you!

> Fixes: 1c67f9c54cdc ("net: pse-pd: pd692x0: Fix power budget leak in manager setup error path")
> Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
> ---
>   drivers/net/pse-pd/pd692x0.c | 22 +++++++++++++++-------
>   1 file changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/pse-pd/pd692x0.c b/drivers/net/pse-pd/pd692x0.c
> index 209de9cec849..34f0dfbccd06 100644
> --- a/drivers/net/pse-pd/pd692x0.c
> +++ b/drivers/net/pse-pd/pd692x0.c
> @@ -1224,8 +1224,9 @@ static void pd692x0_of_put_managers(struct pd692x0_priv *priv,
>   	}
>   }
>   
> -static void pd692x0_managers_free_pw_budget(struct pd692x0_priv *priv)
> +static void pd692x0_managers_free_pw_budget(void *data)
>   {
> +	struct pd692x0_priv *priv = data;
>   	int i;
>   
>   	for (i = 0; i < PD692X0_MAX_MANAGERS; i++) {
> @@ -1279,31 +1280,39 @@ static int pd692x0_setup_pi_matrix(struct pse_controller_dev *pcdev)
>   	if (ret)
>   		goto err_of_managers;
>   
> +	/* Frees whatever pd692x0_req_managers_pw_budget() manages to
> +	 * request, on any later probe failure and on unbind. Added after
> +	 * the manager regulators so that it runs before devres unregisters
> +	 * them and their supply goes away.
> +	 */
> +	ret = devm_add_action_or_reset(&priv->client->dev,
> +				       pd692x0_managers_free_pw_budget, priv);
> +	if (ret)
> +		goto err_of_managers;
> +
>   	ret = pd692x0_req_managers_pw_budget(priv);
>   	if (ret)
>   		goto err_of_managers;
>   
>   	ret = pd692x0_set_ports_matrix(priv, manager);
>   	if (ret)
> -		goto err_managers_req_pw;
> +		goto err_of_managers;
>   
>   	/* Do not init the conf if it is already saved */
>   	if (!priv->cfg_saved) {
>   		ret = pd692x0_hw_conf_init(priv);
>   		if (ret)
> -			goto err_managers_req_pw;
> +			goto err_of_managers;
>   
>   		ret = pd692x0_save_user_byte(priv);
>   		if (ret)
> -			goto err_managers_req_pw;
> +			goto err_of_managers;
>   	}
>   
>   	pd692x0_of_put_managers(priv, manager);
>   	kfree(manager);
>   	return 0;
>   
> -err_managers_req_pw:
> -	pd692x0_managers_free_pw_budget(priv);
>   err_of_managers:
>   	pd692x0_of_put_managers(priv, manager);
>   err_free_manager:
> @@ -1855,7 +1864,6 @@ static void pd692x0_i2c_remove(struct i2c_client *client)
>   {
>   	struct pd692x0_priv *priv = i2c_get_clientdata(client);
>   
> -	pd692x0_managers_free_pw_budget(priv);
>   	firmware_upload_unregister(priv->fwl);
>   }
>   

-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com


  reply	other threads:[~2026-10-19 12:46 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-18  8:23 [PATCH net 00/10] net: pse-pd: assorted lifetime and error-path fixes Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 01/10] net: pse-pd: size the notification kfifo after defaulting nr_lines Carlo Szelinsky
2026-10-19  9:22   ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 02/10] net: pse-pd: fix module refcount leak in pse_control_get_internal() Carlo Szelinsky
2026-10-19  8:51   ` netdev-bot+sashiko
2026-10-19  9:31   ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 03/10] net: pse-pd: do not keep a failed IRQ in pcdev->irq Carlo Szelinsky
2026-10-19  9:33   ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 04/10] net: pse-pd: do not reach a freed PHY from the notification worker Carlo Szelinsky
2026-10-19  8:51   ` netdev-bot+sashiko
2026-10-18  8:23 ` [PATCH net 05/10] net: pse-pd: check the PI state under the lock when setting a power limit Carlo Szelinsky
2026-10-19  8:51   ` netdev-bot+sashiko
2026-10-19 12:30     ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 06/10] net: pse-pd: do not tie a shared power domain to its creator's devres Carlo Szelinsky
2026-10-19  8:51   ` netdev-bot+sashiko
2026-10-18  8:23 ` [PATCH net 07/10] net: pse-pd: pd692x0: release the manager power budget through devres Carlo Szelinsky
2026-10-19 12:45   ` Kory Maincent [this message]
2026-10-18  8:23 ` [PATCH net 08/10] net: pse-pd: pd692x0: defer probe while a manager supply is unresolved Carlo Szelinsky
2026-10-19 12:47   ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 09/10] net: pse-pd: si3474: fix use-after-free in ancillary client error path Carlo Szelinsky
2026-10-19 12:50   ` Kory Maincent
2026-10-18  8:23 ` [PATCH net 10/10] net: pse-pd: reject a power limit whose current does not fit an int Carlo Szelinsky
2026-10-19 12:53   ` Kory Maincent
2026-10-18 23:32 ` [PATCH net 00/10] net: pse-pd: assorted lifetime and error-path fixes Ross Cawston

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=76248dfd-a193-4a75-9fb3-771cad207cb4@bootlin.com \
    --to=kory.maincent@bootlin.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=github@szelinsky.de \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=kyle.swenson@est.tech \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev-bot+sashiko@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=piotr.kubik@adtran.com \
    --cc=saikrishnag@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®