[PATCH] [WATCHDOG] it8712f_wdt Zero MSB timeout byte when disabling watchdog

["Andrew Paprocki" <andrew@ishiboo.com>]

[-- Attachment #1: Type: text/plain, Size: 363 bytes --]

I noticed this while testing the latest code. I'm not sure if it is required,
but the normal (or LSB) timeout value is set to zero, so the MSB should
be as well to stay consistent.

If the chip revision is >= 8, set MSB of the 16-bit timeout value to zero
when disabling the watchdog in it8712f_wdt_disable().

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>

[-- Attachment #2: 2.6.25-rc8-it8712f_wdt-zero-timeout.txt --]
[-- Type: text/plain, Size: 820 bytes --]

Date: Wed, 2 Apr 2008 02:23:33 -0400
Subject: [PATCH] [WATCHDOG] it8712f_wdt Zero MSB timeout byte when disabling watchdog

If the chip revision is >= 8, set MSB of the 16-bit timeout value to zero
when disabling the watchdog in it8712f_wdt_disable().

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
---
 drivers/watchdog/it8712f_wdt.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index ca90c51..445b7e8 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -200,6 +200,8 @@ it8712f_wdt_disable(void)
 
 	superio_outb(0, WDT_CONFIG);
 	superio_outb(0, WDT_CONTROL);
+	if (revision >= 0x08)
+		superio_outb(0, WDT_TIMEOUT + 1);
 	superio_outb(0, WDT_TIMEOUT);
 
 	superio_exit();
-- 
1.4.4.4