From: neil.armstrong@linaro.org
To: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>,
airlied@gmail.com, simona@ffwll.ch,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, dianders@chromium.org
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/2] drm/panel: ilitek-ili9882t: Add support for Ilitek IL79900A-based panels
Date: Fri, 31 Oct 2025 11:15:25 +0100 [thread overview]
Message-ID: <7642d4ba-72fe-4af7-a02a-96676f8945af@linaro.org> (raw)
In-Reply-To: <20251031100447.253164-3-yelangyan@huaqin.corp-partner.google.com>
On 10/31/25 11:04, Langyan Ye wrote:
> The Ilitek IL79900A display controller is similar to the ILI9882T and can
> be supported within the existing `panel-ilitek-ili9882t.c` driver.
>
> This patch extends the ILI9882T driver to handle IL79900A-based panels,
> such as the Tianma TL121BVMS07-00. The IL79900A uses a similar command
> sequence and initialization flow, with minor differences in power supply
> configuration and timing.
>
> Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
> ---
> drivers/gpu/drm/panel/panel-ilitek-ili9882t.c | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c b/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
> index 85c7059be214..c52f20863fc7 100644
> --- a/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
> +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
> @@ -61,6 +61,13 @@ struct ili9882t {
> mipi_dsi_dcs_write_seq_multi(ctx, ILI9882T_DCS_SWITCH_PAGE, \
> 0x98, 0x82, (page))
>
> +/* IL79900A-specific commands, add new commands as you decode them */
> +#define IL79900A_DCS_SWITCH_PAGE 0xFF
> +
> +#define il79900a_switch_page(ctx, page) \
> + mipi_dsi_dcs_write_seq_multi(ctx, IL79900A_DCS_SWITCH_PAGE, \
> + 0x5a, 0xa5, (page))
> +
> static int starry_ili9882t_init(struct ili9882t *ili)
> {
> struct mipi_dsi_multi_context ctx = { .dsi = ili->dsi };
> @@ -413,6 +420,38 @@ static int starry_ili9882t_init(struct ili9882t *ili)
> return ctx.accum_err;
> };
>
> +static int tianma_il79900a_init(struct ili9882t *ili)
> +{
> + struct mipi_dsi_multi_context ctx = { .dsi = ili->dsi };
> +
> + mipi_dsi_usleep_range(&ctx, 5000, 5100);
> +
> + il79900a_switch_page(&ctx, 0x06);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0x3e, 0x62);
> +
> + il79900a_switch_page(&ctx, 0x02);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0x1b, 0x20);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0x5d, 0x00);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0x5e, 0x40);
> +
> + il79900a_switch_page(&ctx, 0x07);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0X29, 0x00);
> +
> + il79900a_switch_page(&ctx, 0x06);
> + mipi_dsi_dcs_write_seq_multi(&ctx, 0x92, 0x22);
> +
> + il79900a_switch_page(&ctx, 0x00);
> + mipi_dsi_dcs_exit_sleep_mode_multi(&ctx);
> +
> + mipi_dsi_msleep(&ctx, 120);
> +
> + mipi_dsi_dcs_set_display_on_multi(&ctx);
> +
> + mipi_dsi_msleep(&ctx, 80);
> +
> + return 0;
> +};
> +
> static inline struct ili9882t *to_ili9882t(struct drm_panel *panel)
> {
> return container_of(panel, struct ili9882t, base);
> @@ -529,6 +568,19 @@ static const struct drm_display_mode starry_ili9882t_default_mode = {
> .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> };
>
> +static const struct drm_display_mode tianma_il79900a_default_mode = {
> + .clock = 264355,
> + .hdisplay = 1600,
> + .hsync_start = 1600 + 20,
> + .hsync_end = 1600 + 20 + 4,
> + .htotal = 1600 + 20 + 4 + 20,
> + .vdisplay = 2560,
> + .vsync_start = 2560 + 82,
> + .vsync_end = 2560 + 82 + 2,
> + .vtotal = 2560 + 82 + 2 + 36,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
> static const struct panel_desc starry_ili9882t_desc = {
> .modes = &starry_ili9882t_default_mode,
> .bpc = 8,
> @@ -543,6 +595,20 @@ static const struct panel_desc starry_ili9882t_desc = {
> .init = starry_ili9882t_init,
> };
>
> +static const struct panel_desc tianma_tl121bvms07_desc = {
> + .modes = &tianma_il79900a_default_mode,
> + .bpc = 8,
> + .size = {
> + .width_mm = 163,
> + .height_mm = 260,
> + },
> + .lanes = 3,
> + .format = MIPI_DSI_FMT_RGB888,
> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_LPM,
> + .init = tianma_il79900a_init,
> +};
> +
> static int ili9882t_get_modes(struct drm_panel *panel,
> struct drm_connector *connector)
> {
> @@ -680,6 +746,9 @@ static const struct of_device_id ili9882t_of_match[] = {
> { .compatible = "starry,ili9882t",
> .data = &starry_ili9882t_desc
> },
> + { .compatible = "tianma,tl121bvms07-00",
> + .data = &tianma_tl121bvms07_desc
> + },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, ili9882t_of_match);
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
next prev parent reply other threads:[~2025-10-31 10:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-31 10:04 [PATCH v5 0/2] " Langyan Ye
2025-10-31 10:04 ` [PATCH v5 1/2] dt-bindings: display: panel: Add Tianma TL121BVMS07-00 panel Langyan Ye
2025-10-31 10:04 ` [PATCH v5 2/2] drm/panel: ilitek-ili9882t: Add support for Ilitek IL79900A-based panels Langyan Ye
2025-10-31 10:15 ` neil.armstrong [this message]
2025-10-31 10:23 ` [PATCH v5 0/2] " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7642d4ba-72fe-4af7-a02a-96676f8945af@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=yelangyan@huaqin.corp-partner.google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®