Re: [PATCH]hwmon: (k10temp) Add support for Zen5 Ryzen Desktop

[Guenter Roeck <linux@roeck-us.net>]

On 3/27/25 16:17, David Hows wrote:
> ---

Is it so difficult to add a couple of lines of description ?

There are lots of examples in previous patches.

     hwmon: (k10temp) add support for cyan skillfish

     Add support for Cyan Skillfish (AMD Family 17h Model 47h),
     which appear to be Zen 2 based APU.


     hwmon: (k10temp) Add support for AMD Family 19h Model 8h

     Add support for AMD Family 19h Model 8h CPUs, which appear to
     be the Zen 3 based AMD Threadripper 5000WX series (Chagall).


     hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models

     Add thermal info support for AMD Family 1Ah-based models. Support is
     provided on a per-socket granularity.


     hwmon: (k10temp): Add support for new family 17h and 19h models

     Add the support for CCD offsets used on family 17h models A0h-AFh,
     and family 19h models 60h-7Fh.

Even

     hwmon: (k10temp) Add PCI ID for family 19, model 78h

     Enable k10temp on this system.

is better than nothing.

Ok, ok, no problem, I'll do it myself, and add a note saying that this is
Zen 5 based Granite Ridge. If and when I find the time to do it.

Guenter

>   drivers/hwmon/k10temp.c | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index d0b4cc9a5011..cc2ad7a324f9 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -502,6 +502,13 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   			k10temp_get_ccd_support(data, 12);
>   			break;
>   		}
> +	} else if (boot_cpu_data.x86 == 0x1a) {
> +		switch (boot_cpu_data.x86_model) {
> +		case 0x40 ... 0x4f:	/* Zen5 Ryzen Desktop*/
> +			data->ccd_offset = 0x308;
> +			k10temp_get_ccd_support(data, 8);
> +			break;
> +		}
>   	}
>   
>   	for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {