From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Johan Hovold <johan+linaro@kernel.org>,
Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/6] arm64: dts: qcom: sm8250-mtp: fix wcd938x codec node
Date: Mon, 2 Jan 2023 12:15:50 +0100 [thread overview]
Message-ID: <77bd335a-1989-2d5f-d480-d388e141ec91@linaro.org> (raw)
In-Reply-To: <20230102105038.8074-6-johan+linaro@kernel.org>
On 2.01.2023 11:50, Johan Hovold wrote:
> The wcd938x codec is not a memory-mapped device and does not belong
> under the soc node.
>
> Move the node to the root node to avoid DT validation failures.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Could you rename it to audio-codec and separate/sort the properties
like you did for x13s?
Konrad
> arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
> 1 file changed, 19 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> index 3ed8c84e25b8..ea43dbdc3671 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -23,6 +23,25 @@ aliases {
> serial0 = &uart12;
> };
>
> + wcd938x: codec {
> + compatible = "qcom,wcd9380-codec";
> + #sound-dai-cells = <1>;
> + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
> + vdd-buck-supply = <&vreg_s4a_1p8>;
> + vdd-rxtx-supply = <&vreg_s4a_1p8>;
> + vdd-io-supply = <&vreg_s4a_1p8>;
> + vdd-mic-bias-supply = <&vreg_bob>;
> + qcom,micbias1-microvolt = <1800000>;
> + qcom,micbias2-microvolt = <1800000>;
> + qcom,micbias3-microvolt = <1800000>;
> + qcom,micbias4-microvolt = <1800000>;
> + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> + qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> + qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> + qcom,rx-device = <&wcd_rx>;
> + qcom,tx-device = <&wcd_tx>;
> + };
> +
> chosen {
> stdout-path = "serial0:115200n8";
> };
> @@ -631,27 +650,6 @@ &slpi {
> firmware-name = "qcom/sm8250/slpi.mbn";
> };
>
> -&soc {
> - wcd938x: codec {
> - compatible = "qcom,wcd9380-codec";
> - #sound-dai-cells = <1>;
> - reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
> - vdd-buck-supply = <&vreg_s4a_1p8>;
> - vdd-rxtx-supply = <&vreg_s4a_1p8>;
> - vdd-io-supply = <&vreg_s4a_1p8>;
> - vdd-mic-bias-supply = <&vreg_bob>;
> - qcom,micbias1-microvolt = <1800000>;
> - qcom,micbias2-microvolt = <1800000>;
> - qcom,micbias3-microvolt = <1800000>;
> - qcom,micbias4-microvolt = <1800000>;
> - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> - qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> - qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> - qcom,rx-device = <&wcd_rx>;
> - qcom,tx-device = <&wcd_tx>;
> - };
> -};
> -
> &sound {
> compatible = "qcom,sm8250-sndcard";
> model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
next prev parent reply other threads:[~2023-01-02 11:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-02 10:50 [PATCH 0/6] arm64: dts: qcom: disable x13s sound + cleanups Johan Hovold
2023-01-02 10:50 ` [PATCH 1/6] arm64: dts: qcom: sc8280xp-x13s: disable soundcard Johan Hovold
2023-01-02 12:25 ` Krzysztof Kozlowski
2023-01-02 15:07 ` Johan Hovold
2023-01-02 15:12 ` Krzysztof Kozlowski
2023-01-02 15:24 ` Johan Hovold
2023-01-02 15:28 ` Krzysztof Kozlowski
2023-01-02 15:39 ` Johan Hovold
2023-01-02 15:46 ` Krzysztof Kozlowski
2023-01-02 15:58 ` Johan Hovold
2023-01-02 16:13 ` Krzysztof Kozlowski
2023-01-02 16:52 ` Johan Hovold
2023-01-02 10:50 ` [PATCH 2/6] arm64: dts: qcom: sc8280xp: disable sound nodes Johan Hovold
2023-01-02 11:13 ` Konrad Dybcio
2023-01-02 12:29 ` Krzysztof Kozlowski
2023-01-02 15:15 ` Johan Hovold
2023-01-02 17:17 ` Johan Hovold
2023-01-02 17:20 ` Konrad Dybcio
2023-01-02 10:50 ` [PATCH 3/6] arm64: dts: qcom: sc8280xp: clean up tx-macro node Johan Hovold
2023-01-02 11:13 ` Konrad Dybcio
2023-01-02 10:50 ` [PATCH 4/6] arm64: dts: qcom: sc8280xp-x13s: fix wcd938x codec node Johan Hovold
2023-01-02 11:14 ` Konrad Dybcio
2023-01-02 10:50 ` [PATCH 5/6] arm64: dts: qcom: sm8250-mtp: " Johan Hovold
2023-01-02 11:15 ` Konrad Dybcio [this message]
2023-01-02 11:22 ` Johan Hovold
2023-01-02 12:20 ` Krzysztof Kozlowski
2023-01-02 15:03 ` Johan Hovold
2023-01-02 15:09 ` Krzysztof Kozlowski
2023-01-02 15:18 ` Johan Hovold
2023-01-02 15:22 ` Krzysztof Kozlowski
2023-01-02 15:28 ` Johan Hovold
2023-01-02 10:50 ` [PATCH 6/6] arm64: dts: qcom: sm8450-hdk: " Johan Hovold
2023-01-02 11:16 ` Konrad Dybcio
2023-01-02 11:42 ` Johan Hovold
2023-01-02 12:23 ` Krzysztof Kozlowski
2023-01-02 12:24 ` Krzysztof Kozlowski
2023-01-02 15:05 ` Johan Hovold
2023-01-02 15:09 ` Krzysztof Kozlowski
2023-01-02 15:18 ` Johan Hovold
2023-01-02 15:24 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77bd335a-1989-2d5f-d480-d388e141ec91@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johan+linaro@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®