Re: [PATCH v2 1/2] ARM: dts: mvebu: Add device tree binding for Marvell Armada 38x

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 12/04/2023 04:57, Tony Dinh wrote:
> Add device tree binding for Marvell Armada 38x.
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).

This is not DTS. These are bindings.

> ---
> 
> Changes in v2:
> - Add marvell,38x.yaml. For now, add this binding to the Marvell
> directory to keep it consistent with other Marvell yaml files.
> At a later date and a separate patch, consolidate the Marvell
> yaml files into  marvell.yaml.
> 
>  .../bindings/arm/marvell/armada-38x.yaml      | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml

marvell,armada-38x.yaml

Or just squash it with existing armada bindings... Keeping one binding
per one SoC group is a bit a lot.

> 
> diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
> new file mode 100644
> index 000000000000..096bd46d932a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/marvell/marvell,38x.yaml#

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).


Best regards,
Krzysztof