mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: Andrew Davis <afd@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>,
	<vaishnav.a@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v12 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Thu, 2 Mar 2023 09:03:09 +0530	[thread overview]
Message-ID: <7843adf0-f883-280b-1d87-44010ceef767@ti.com> (raw)
In-Reply-To: <61fab807-42df-cc2c-51de-f54e9ea477c8@ti.com>



On 01/03/23 9:27 pm, Andrew Davis wrote:
> On 3/1/23 3:11 AM, Ravi Gunasekaran wrote:
>> From: Aswath Govindraju <a-govindraju@ti.com>
>>
>> Add support for two instance of OSPI in J721S2 SoC.
>>
>> Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
>> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
>> Signed-off-by: Matt Ranostay <mranostay@ti.com>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
>> ---
>> Changes from v11:
>> * Cleaned up comments
>>
>> Changes from v10:
>> * Documented the reason for disabling the nodes by default.
>> * Removed Link tag from commmit message
>>
>> Changes from v9:
>> * Disabled fss, ospi nodes by default in common DT file
>>
>> Changes from v8:
>> * Updated "ranges" property to fix dtbs warnings
>>
>> Changes from v7:
>> * Removed "reg" property from syscon node
>> * Renamed the "syscon" node to "bus" to after change in
>>    compatible property
>>
>> Changes from v6:
>> * Fixed the syscon node's compatible property
>>
>> Changes from v5:
>> * Updated the syscon node's compatible property
>> * Removed Cc tags from commit message
>>
>> Changes from v4:
>> * No change
>>
>> Changes from v3:
>> * No change
>>
>> Changes from v2:
>> * No change
>>
>> Changes from v1:
>> * No change
>>
>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 46 +++++++++++++++++++
>>   1 file changed, 46 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> index 0af242aa9816..ab3ce8be7216 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> @@ -306,4 +306,50 @@
>>               ti,cpts-periodic-outputs = <2>;
>>           };
>>       };
>> +
>> +    fss: bus@47000000 {
>> +        compatible = "simple-bus";
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +        ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
>> +             <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
>> +             <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
>> +
>> +        status = "disabled";
> 
> Since this node doesn't need pinmux, why is it default disabled? Same for
> the other parent nodes in this series.
> 
> Andrew

In this patch and others in this series, since child node is disabled,
I thought of disabling the parent as well. And to later enable the
parent node at the time when the child node needs to be enabled.

> 
>> +
>> +        ospi0: spi@47040000 {
>> +            compatible = "ti,am654-ospi", "cdns,qspi-nor";
>> +            reg = <0x00 0x47040000 0x00 0x100>,
>> +                  <0x05 0x00000000 0x01 0x00000000>;
>> +            interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
>> +            cdns,fifo-depth = <256>;
>> +            cdns,fifo-width = <4>;
>> +            cdns,trigger-address = <0x0>;
>> +            clocks = <&k3_clks 109 5>;
>> +            assigned-clocks = <&k3_clks 109 5>;
>> +            assigned-clock-parents = <&k3_clks 109 7>;
>> +            assigned-clock-rates = <166666666>;
>> +            power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            status = "disabled"; /* Needs pinmux */
>> +        };
>> +
>> +        ospi1: spi@47050000 {
>> +            compatible = "ti,am654-ospi", "cdns,qspi-nor";
>> +            reg = <0x00 0x47050000 0x00 0x100>,
>> +                  <0x07 0x00000000 0x01 0x00000000>;
>> +            interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
>> +            cdns,fifo-depth = <256>;
>> +            cdns,fifo-width = <4>;
>> +            cdns,trigger-address = <0x0>;
>> +            clocks = <&k3_clks 110 5>;
>> +            power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            status = "disabled"; /* Needs pinmux */
>> +        };
>> +    };
>>   };

-- 
Regards,
Ravi

  reply	other threads:[~2023-03-02  3:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-01  9:11 [PATCH v12 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
2023-03-01 15:57   ` Andrew Davis
2023-03-02  3:33     ` Ravi Gunasekaran [this message]
2023-03-03  8:30       ` Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-03-01  9:11 ` [PATCH v12 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7843adf0-f883-280b-1d87-44010ceef767@ti.com \
    --to=r-gunasekaran@ti.com \
    --cc=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=s-vadapalli@ti.com \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®