From: Rosen Penev <rosenp@gmail.com>
To: "Matthew Garrett" <mjg59@srcf.ucam.org>,
"Pali Rohár" <pali@kernel.org>,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Gabriele Mazzotta" <gabriele.mzt@gmail.com>,
"Darren Hart" <dvhart@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] platform/x86: dell-laptop: Don't use an unread keyboard state at init
Date: Fri, 20 Nov 2026 16:09:30 -0800 [thread overview]
Message-ID: <78b2d044b90dfae5dca66c5eed5cbdfeccc1f4e1.1795219225.git.rosenp@gmail.com> (raw)
In-Reply-To: <cover.1795219225.git.rosenp@gmail.com>
kbd_init_info() ignores the return value of kbd_get_state(). If the
call fails, the uninitialized state on the stack is used to set
kbd_previous_level and kbd_previous_mode_bit, which are later sent to
the BIOS when triggers are enabled or the backlight is turned back on.
kbd_get_info() has already succeeded at that point, so a failure here
may well be transient and is not a reason to give up on the keyboard
backlight. Start from level 0 and the off mode instead: the code below
then picks level 1 and the first supported mode, as it already does
when the backlight is off at boot.
Fixes: 02b2aaaa57ab ("platform: x86: dell-laptop: Add support for keyboard backlight")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v2: fall back to level 0 / off mode instead of returning the error
drivers/platform/x86/dell/dell-laptop.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c
index c1a51bf95c25..eca348497ac3 100644
--- a/drivers/platform/x86/dell/dell-laptop.c
+++ b/drivers/platform/x86/dell/dell-laptop.c
@@ -1455,7 +1455,7 @@ static inline int kbd_init_info(void)
dell_smbios_find_token(KBD_LED_AC_TOKEN))
kbd_timeout_ac_supported = true;
- kbd_get_state(&state);
+ ret = kbd_get_state(&state);
/* NOTE: timeout value is stored in 6 bits so max value is 63 */
if (kbd_info.seconds > 63)
@@ -1472,8 +1472,13 @@ static inline int kbd_init_info(void)
*/
kbd_info.modes &= ~BIT(KBD_MODE_BIT_ON);
- kbd_previous_level = kbd_get_level(&state);
- kbd_previous_mode_bit = state.mode_bit;
+ if (ret == 0) {
+ kbd_previous_level = kbd_get_level(&state);
+ kbd_previous_mode_bit = state.mode_bit;
+ } else {
+ kbd_previous_level = 0;
+ kbd_previous_mode_bit = KBD_MODE_BIT_OFF;
+ }
if (kbd_previous_level == 0 && kbd_get_max_level() != 0)
kbd_previous_level = 1;
--
2.56.1
next prev parent reply other threads:[~2026-11-21 0:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 0:09 [PATCH v2 0/3] platform/x86: dell-laptop: Fix keyboard backlight and charge threshold handling Rosen Penev
2026-11-21 0:09 ` [PATCH v2 1/3] platform/x86: dell-laptop: Fix keyboard backlight timeout overflow Rosen Penev
2026-11-21 0:09 ` Rosen Penev [this message]
2026-11-21 0:09 ` [PATCH v2 3/3] platform/x86: dell-laptop: Parse the charge end threshold as an int Rosen Penev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78b2d044b90dfae5dca66c5eed5cbdfeccc1f4e1.1795219225.git.rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=dvhart@linux.intel.com \
--cc=gabriele.mzt@gmail.com \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=pali@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®