From: Jie Gan <jie.gan@oss.qualcomm.com>
To: James Clark <james.clark@linaro.org>, Jie Gan <jie.gan@oss.qualcomm.com>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Mike Leach <mike.leach@linaro.org>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Tingwei Zhang <tingwei.zhang@oss.qualcomm.com>
Subject: Re: [PATCH v2 3/3] coresight: tpda: add sysfs node to flush specific port
Date: Wed, 27 Aug 2025 17:48:33 +0800 [thread overview]
Message-ID: <78d2ab99-f304-4fab-bc7b-859c8aa781d6@oss.qualcomm.com> (raw)
In-Reply-To: <b1f79a26-97e1-40f4-b076-51d5c2abe736@linaro.org>
On 8/27/2025 5:17 PM, James Clark wrote:
>
>
> On 27/08/2025 5:20 am, Jie Gan wrote:
>> From: Tao Zhang <tao.zhang@oss.qualcomm.com>
>>
>> Setting bit i in the TPDA_FLUSH_CR register initiates a flush request
>> for port i, forcing the data to synchronize and be transmitted to the
>> sink device.
>>
>> Signed-off-by: Tao Zhang <tao.zhang@oss.qualcomm.com>
>> Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com>
>> Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
>> ---
>> .../testing/sysfs-bus-coresight-devices-tpda | 7 ++++
>> drivers/hwtracing/coresight/coresight-tpda.c | 42 +++++++++++++++++++
>> drivers/hwtracing/coresight/coresight-tpda.h | 2 +
>> 3 files changed, 51 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-
>> tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
>> index fb651aebeb31..2cf2dcfc13c8 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
>> @@ -41,3 +41,10 @@ Contact: Jinlong Mao
>> <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qu
>> Description:
>> (RW) Configure the CMB/MCMB channel mode for all enabled ports.
>> Value 0 means raw channel mapping mode. Value 1 means
>> channel pair marking mode.
>> +
>> +What: /sys/bus/coresight/devices/<tpda-name>/port_flush_req
>> +Date: August 2025
>> +KernelVersion: 6.17
>> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang
>> <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
>> +Description:
>> + (RW) Configure the bit i to requests a flush operation of
>> port i on the TPDA.
>> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/
>> hwtracing/coresight/coresight-tpda.c
>> index 430f76c559f2..8b1fe128881d 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpda.c
>> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
>> @@ -487,6 +487,47 @@ static ssize_t cmbchan_mode_store(struct device
>> *dev,
>> }
>> static DEVICE_ATTR_RW(cmbchan_mode);
>> +static ssize_t port_flush_req_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
>> + unsigned long val;
>> +
>> + if (!drvdata->csdev->refcnt)
>> + return -EINVAL;
>> +
>> + guard(spinlock)(&drvdata->spinlock);
>> + CS_UNLOCK(drvdata->base);
>> + val = readl_relaxed(drvdata->base + TPDA_FLUSH_CR);
>> + CS_LOCK(drvdata->base);
>> + return sysfs_emit(buf, "%lx\n", val);
>
> Still missing the 0x prefix
Will re-check rest of the codes and add prefix. Sorry I missed it during
the review process.
>
>> +}
>> +
>> +static ssize_t port_flush_req_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf,
>> + size_t size)
>> +{
>> + struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
>> + unsigned long val;
>> +
>> + if (kstrtoul(buf, 0, &val))
>> + return -EINVAL;
>> +
>> + if (!drvdata->csdev->refcnt || !val)
>> + return -EINVAL;
>> +
>> + val |= FIELD_PREP(TPDA_MAX_INPORTS_MASK, val);
>
> Using FIELD_PREP() now that it's the full width of the register makes
> less sense. Especially when there is no corresponding FIELD_FIT() check,
> which is fine because everything always fits. But if you didn't know
> the mask was the full width you'd wonder if the check is missing.
>
> I would just write val directly to TPDA_FLUSH_CR so it's simpler.
>
> It should also have been val = FIELD_PREP(...)
Yeah, it should have been val = FIELD_PREP(...) here... sorry for the
mistake here..
I was thinking the unsigned long here could be 64 or 32 bits and we only
need the value of the lower 32 bits. So that's why I am using val =
FIELD_PREP(...) here. We shouldn't write a value greater than UINT32_MAX
to the register.
Thanks,
Jie
>
>> + guard(spinlock)(&drvdata->spinlock);
>> + CS_UNLOCK(drvdata->base);
>> + writel_relaxed(val, drvdata->base + TPDA_FLUSH_CR);
>> + CS_LOCK(drvdata->base);
>> +
>> + return size;
>> +}
>> +static DEVICE_ATTR_RW(port_flush_req);
>> +
>> static struct attribute *tpda_attrs[] = {
>> &dev_attr_trig_async_enable.attr,
>> &dev_attr_trig_flag_ts_enable.attr,
>> @@ -494,6 +535,7 @@ static struct attribute *tpda_attrs[] = {
>> &dev_attr_freq_ts_enable.attr,
>> &dev_attr_global_flush_req.attr,
>> &dev_attr_cmbchan_mode.attr,
>> + &dev_attr_port_flush_req.attr,
>> NULL,
>> };
>> diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/
>> hwtracing/coresight/coresight-tpda.h
>> index 8e1b66115ad1..56d3ad293e46 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpda.h
>> +++ b/drivers/hwtracing/coresight/coresight-tpda.h
>> @@ -10,6 +10,7 @@
>> #define TPDA_Pn_CR(n) (0x004 + (n * 4))
>> #define TPDA_FPID_CR (0x084)
>> #define TPDA_SYNCR (0x08C)
>> +#define TPDA_FLUSH_CR (0x090)
>> /* Cross trigger FREQ packets timestamp bit */
>> #define TPDA_CR_FREQTS BIT(2)
>> @@ -35,6 +36,7 @@
>> #define TPDA_SYNCR_MAX_COUNTER_VAL (0xFFF)
>> #define TPDA_MAX_INPORTS 32
>> +#define TPDA_MAX_INPORTS_MASK GENMASK(31, 0)
>> /* Bits 6 ~ 12 is for atid value */
>> #define TPDA_CR_ATID GENMASK(12, 6)
>
>
next prev parent reply other threads:[~2025-08-27 9:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 4:20 [PATCH v2 0/3] add sysfs nodes to configure TPDA's registers Jie Gan
2025-08-27 4:20 ` [PATCH v2 1/3] coresight: tpda: add sysfs nodes for tpda cross-trigger configuration Jie Gan
2025-08-27 9:06 ` James Clark
2025-08-27 9:18 ` Jie Gan
2025-08-27 4:20 ` [PATCH v2 2/3] coresight: tpda: add logic to configure TPDA_SYNCR register Jie Gan
2025-08-27 9:21 ` James Clark
2025-08-27 9:52 ` Jie Gan
2025-08-27 4:20 ` [PATCH v2 3/3] coresight: tpda: add sysfs node to flush specific port Jie Gan
2025-08-27 9:17 ` James Clark
2025-08-27 9:48 ` Jie Gan [this message]
2025-08-27 10:16 ` James Clark
2025-08-27 10:21 ` Jie Gan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78d2ab99-f304-4fab-bc7b-859c8aa781d6@oss.qualcomm.com \
--to=jie.gan@oss.qualcomm.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=suzuki.poulose@arm.com \
--cc=tingwei.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®