Re: [PATCH v10 04/11] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb

[Josua Mayer <josua@solid-run.com>]

Am 02.10.26 um 11:54 schrieb Geert Uytterhoeven:
> Hi Josua,
>
> On Mon, 28 Sept 2026 at 19:34, Josua Mayer <josua@solid-run.com> wrote:
>> Add support for the SolidRun RZ/G2L SoM [1] on HummingBoard IIoT [2].
>>
>> The SoM features:
>> - 2x 1Gbps Ethernet with PHY
>> - eMMC
>> - 1/2GB DDR
>> - WiFi + Bluetooth
>> - SDHI Mux switching between eMMC and Carrier Board
>>
>> The HummingBoard IIoT features:
>> - 3x USB-2.0 Type A connector
>> - 2x 1Gbps RJ45 Ethernet
>> - USB Type-C Console Port
>> - microSD connector
>> - RTC with backup battery
>> - RGB Status LED
>> - 1x M.2 B-Key connector with USB-2.0 + SIM card holder
>> - 1x DSI Display Connector
>> - GPIO header
>> - 2x RS232/RS485 ports (configurable)
>> - 2x CAN
>>
>> Descriptions for eMMC, microSD and RS485 are provided as overlays due to
>> their dependency on configurable mux states.
>>
>> [1] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/rz-g2l-som/
>> [2] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/hummingboard-rz-series-sbcs/hummingboard-rz-g2l-iot-sbc/
>>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>> Signed-off-by: Josua Mayer <josua@solid-run.com>
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/renesas/rzg2l-sr-som.dtsi
>> +       sdhi0_4bit_pins: sdhi0-4bit {
>> +               sd0_ctrl_dat03 {
>> +               sd0_dat47 {
> Node names should not use underscores.  I  will replace them by
> dashes.
Acknowledged, thanks for figuring this out!
It didn't show up in my local tree before going to next with dtbs_check ...
>
>> +       };
> Gr{oetje,eeting}s,
>
>                          Geert
>