From: Philipp Hortmann <philipp.g.hortmann@gmail.com>
To: Forest Bond <forest@alittletooquiet.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/6] staging: vt6655: Remove unused macros in mac.h
Date: Mon, 4 Apr 2022 22:48:35 +0200 [thread overview]
Message-ID: <78f72d0aa3d1bdddf3c415fd4c458399aa5e7cbf.1649103348.git.philipp.g.hortmann@gmail.com> (raw)
In-Reply-To: <cover.1649103348.git.philipp.g.hortmann@gmail.com>
Remove unused macros with do-while(0) loop or CamelCase in mac.h as
they are not accepted by checkpatch.pl
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
---
V1 -> V2: Merged two patches 1/7 and 2/7 into one.
---
drivers/staging/vt6655/mac.h | 133 -----------------------------------
1 file changed, 133 deletions(-)
diff --git a/drivers/staging/vt6655/mac.h b/drivers/staging/vt6655/mac.h
index 550dc4da80a9..a1576e006d69 100644
--- a/drivers/staging/vt6655/mac.h
+++ b/drivers/staging/vt6655/mac.h
@@ -552,21 +552,6 @@ do { \
VNSvOutPortW(iobase + byRegOfs, wData | (wBits)); \
} while (0)
-#define MACvDWordRegBitsOn(iobase, byRegOfs, dwBits) \
-do { \
- unsigned long dwData; \
- VNSvInPortD(iobase + byRegOfs, &dwData); \
- VNSvOutPortD(iobase + byRegOfs, dwData | (dwBits)); \
-} while (0)
-
-#define MACvRegBitsOnEx(iobase, byRegOfs, byMask, byBits) \
-do { \
- unsigned char byData; \
- VNSvInPortB(iobase + byRegOfs, &byData); \
- byData &= byMask; \
- VNSvOutPortB(iobase + byRegOfs, byData | (byBits)); \
-} while (0)
-
#define MACvRegBitsOff(iobase, byRegOfs, byBits) \
do { \
unsigned char byData; \
@@ -581,37 +566,6 @@ do { \
VNSvOutPortW(iobase + byRegOfs, wData & ~(wBits)); \
} while (0)
-#define MACvDWordRegBitsOff(iobase, byRegOfs, dwBits) \
-do { \
- unsigned long dwData; \
- VNSvInPortD(iobase + byRegOfs, &dwData); \
- VNSvOutPortD(iobase + byRegOfs, dwData & ~(dwBits)); \
-} while (0)
-
-#define MACvGetCurrRx0DescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_RXDMAPTR0, \
- (unsigned long *)pdwCurrDescAddr)
-
-#define MACvGetCurrRx1DescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_RXDMAPTR1, \
- (unsigned long *)pdwCurrDescAddr)
-
-#define MACvGetCurrTx0DescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_TXDMAPTR0, \
- (unsigned long *)pdwCurrDescAddr)
-
-#define MACvGetCurrAC0DescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_AC0DMAPTR, \
- (unsigned long *)pdwCurrDescAddr)
-
-#define MACvGetCurrSyncDescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_SYNCDMAPTR, \
- (unsigned long *)pdwCurrDescAddr)
-
-#define MACvGetCurrATIMDescAddr(iobase, pdwCurrDescAddr) \
- VNSvInPortD(iobase + MAC_REG_ATIMDMAPTR, \
- (unsigned long *)pdwCurrDescAddr)
-
/* set the chip with current BCN tx descriptor address */
#define MACvSetCurrBCNTxDescAddr(iobase, dwCurrDescAddr) \
VNSvOutPortD(iobase + MAC_REG_BCNDMAPTR, \
@@ -622,24 +576,6 @@ do { \
VNSvOutPortW(iobase + MAC_REG_BCNDMACTL + 2, \
wCurrBCNLength)
-#define MACvReadBSSIDAddress(iobase, pbyEtherAddr) \
-do { \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 1); \
- VNSvInPortB(iobase + MAC_REG_BSSID0, \
- (unsigned char *)pbyEtherAddr); \
- VNSvInPortB(iobase + MAC_REG_BSSID0 + 1, \
- pbyEtherAddr + 1); \
- VNSvInPortB(iobase + MAC_REG_BSSID0 + 2, \
- pbyEtherAddr + 2); \
- VNSvInPortB(iobase + MAC_REG_BSSID0 + 3, \
- pbyEtherAddr + 3); \
- VNSvInPortB(iobase + MAC_REG_BSSID0 + 4, \
- pbyEtherAddr + 4); \
- VNSvInPortB(iobase + MAC_REG_BSSID0 + 5, \
- pbyEtherAddr + 5); \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 0); \
-} while (0)
-
#define MACvWriteBSSIDAddress(iobase, pbyEtherAddr) \
do { \
VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 1); \
@@ -676,27 +612,6 @@ do { \
VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 0); \
} while (0)
-#define MACvWriteEtherAddress(iobase, pbyEtherAddr) \
-do { \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 1); \
- VNSvOutPortB(iobase + MAC_REG_PAR0, \
- *pbyEtherAddr); \
- VNSvOutPortB(iobase + MAC_REG_PAR0 + 1, \
- *(pbyEtherAddr + 1)); \
- VNSvOutPortB(iobase + MAC_REG_PAR0 + 2, \
- *(pbyEtherAddr + 2)); \
- VNSvOutPortB(iobase + MAC_REG_PAR0 + 3, \
- *(pbyEtherAddr + 3)); \
- VNSvOutPortB(iobase + MAC_REG_PAR0 + 4, \
- *(pbyEtherAddr + 4)); \
- VNSvOutPortB(iobase + MAC_REG_PAR0 + 5, \
- *(pbyEtherAddr + 5)); \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 0); \
-} while (0)
-
-#define MACvClearISR(iobase) \
- VNSvOutPortD(iobase + MAC_REG_ISR, IMR_MASK_VALUE)
-
#define MACvStart(iobase) \
VNSvOutPortB(iobase + MAC_REG_HOSTCR, \
(HOSTCR_MACEN | HOSTCR_RXON | HOSTCR_TXON))
@@ -704,18 +619,9 @@ do { \
#define MACvRx0PerPktMode(iobase) \
VNSvOutPortD(iobase + MAC_REG_RXDMACTL0, RX_PERPKT)
-#define MACvRx0BufferFillMode(iobase) \
- VNSvOutPortD(iobase + MAC_REG_RXDMACTL0, RX_PERPKTCLR)
-
#define MACvRx1PerPktMode(iobase) \
VNSvOutPortD(iobase + MAC_REG_RXDMACTL1, RX_PERPKT)
-#define MACvRx1BufferFillMode(iobase) \
- VNSvOutPortD(iobase + MAC_REG_RXDMACTL1, RX_PERPKTCLR)
-
-#define MACvRxOn(iobase) \
- MACvRegBitsOn(iobase, MAC_REG_HOSTCR, HOSTCR_RXON)
-
#define MACvReceive0(iobase) \
do { \
unsigned long dwData; \
@@ -736,9 +642,6 @@ do { \
VNSvOutPortD(iobase + MAC_REG_RXDMACTL1, DMACTL_RUN); \
} while (0)
-#define MACvTxOn(iobase) \
- MACvRegBitsOn(iobase, MAC_REG_HOSTCR, HOSTCR_TXON)
-
#define MACvTransmit0(iobase) \
do { \
unsigned long dwData; \
@@ -759,26 +662,6 @@ do { \
VNSvOutPortD(iobase + MAC_REG_AC0DMACTL, DMACTL_RUN); \
} while (0)
-#define MACvTransmitSYNC(iobase) \
-do { \
- unsigned long dwData; \
- VNSvInPortD(iobase + MAC_REG_SYNCDMACTL, &dwData); \
- if (dwData & DMACTL_RUN) \
- VNSvOutPortD(iobase + MAC_REG_SYNCDMACTL, DMACTL_WAKE); \
- else \
- VNSvOutPortD(iobase + MAC_REG_SYNCDMACTL, DMACTL_RUN); \
-} while (0)
-
-#define MACvTransmitATIM(iobase) \
-do { \
- unsigned long dwData; \
- VNSvInPortD(iobase + MAC_REG_ATIMDMACTL, &dwData); \
- if (dwData & DMACTL_RUN) \
- VNSvOutPortD(iobase + MAC_REG_ATIMDMACTL, DMACTL_WAKE); \
- else \
- VNSvOutPortD(iobase + MAC_REG_ATIMDMACTL, DMACTL_RUN); \
-} while (0)
-
#define MACvTransmitBCN(iobase) \
VNSvOutPortB(iobase + MAC_REG_BCNDMACTL, BEACON_READY)
@@ -811,9 +694,6 @@ do { \
#define MACvReadMIBCounter(iobase, pdwCounter) \
VNSvInPortD(iobase + MAC_REG_MIBCNTR, pdwCounter)
-#define MACvPwrEvntDisable(iobase) \
- VNSvOutPortW(iobase + MAC_REG_WAKEUPEN0, 0x0000)
-
#define MACvEnableProtectMD(iobase) \
do { \
unsigned long dwOrgValue; \
@@ -855,19 +735,6 @@ do { \
VNSvOutPortD(iobase + MAC_REG_ENCFG, dwOrgValue); \
} while (0)
-#define MACvReadATIMW(iobase, pwCounter) \
- VNSvInPortW(iobase + MAC_REG_AIDATIM, pwCounter)
-
-#define MACvWriteATIMW(iobase, wCounter) \
- VNSvOutPortW(iobase + MAC_REG_AIDATIM, wCounter)
-
-#define MACvWriteCRC16_128(iobase, byRegOfs, wCRC) \
-do { \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 1); \
- VNSvOutPortW(iobase + byRegOfs, wCRC); \
- VNSvOutPortB(iobase + MAC_REG_PAGE1SEL, 0); \
-} while (0)
-
#define MACvGPIOIn(iobase, pbyValue) \
VNSvInPortB(iobase + MAC_REG_GPIOCTL1, pbyValue)
--
2.25.1
next prev parent reply other threads:[~2022-04-04 21:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-04 20:48 [PATCH v2 0/6] staging: vt6655: Fix CamelCase in upc.h and started " Philipp Hortmann
2022-04-04 20:48 ` Philipp Hortmann [this message]
2022-04-04 20:48 ` [PATCH v2 2/6] staging: vt6655: Rename constant definitions with CamelCase Philipp Hortmann
2022-04-04 20:48 ` [PATCH v2 3/6] staging: vt6655: Rename macro arguments " Philipp Hortmann
2022-04-05 14:09 ` Greg Kroah-Hartman
2022-04-04 20:48 ` [PATCH v2 4/6] staging: vt6655: Rename macros VNSvInPortB,W,D Philipp Hortmann
2022-04-04 20:48 ` [PATCH v2 5/6] staging: vt6655: Rename macros VNSvOutPortB,W,D Philipp Hortmann
2022-04-04 20:49 ` [PATCH v2 6/6] staging: vt6655: Remove macro PCAvDelayByIO Philipp Hortmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78f72d0aa3d1bdddf3c415fd4c458399aa5e7cbf.1649103348.git.philipp.g.hortmann@gmail.com \
--to=philipp.g.hortmann@gmail.com \
--cc=forest@alittletooquiet.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®