mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
To: linux-ext4@vger.kernel.org
Cc: Theodore Ts'o <tytso@mit.edu>, Jan Kara <jack@suse.cz>,
	"Darrick J . Wong" <djwong@kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	John Garry <john.g.garry@oracle.com>,
	Ojaswin Mujoo <ojaswin@linux.ibm.com>,
	Dave Chinner <david@fromorbit.com>,
	linux-kernel@vger.kernel.org, linux-xfs@vger.kernel.org,
	linux-fsdevel@vger.kernel.org,
	"Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Subject: [PATCH v4 4/4] ext4: Do not fallback to buffered-io for DIO atomic write
Date: Fri,  1 Nov 2024 12:20:54 +0530	[thread overview]
Message-ID: <78fb5c40dde4847dc32af09e668a6f81fa251137.1730437365.git.ritesh.list@gmail.com> (raw)
In-Reply-To: <cover.1730437365.git.ritesh.list@gmail.com>

atomic writes is currently only supported for single fsblock and only
for direct-io. We should not return -ENOTBLK for atomic writes since we
want the atomic write request to either complete fully or fail
otherwise. Hence, we should never fallback to buffered-io in case of
DIO atomic write requests.
Let's also catch if this ever happens by adding some WARN_ON_ONCE before
buffered-io handling for direct-io atomic writes. More details of the
discussion [1].

While at it let's add an inline helper ext4_want_directio_fallback() which
simplifies the logic checks and inherently fixes condition on when to return
-ENOTBLK which otherwise was always returning true for any write or directio in
ext4_iomap_end(). It was ok since ext4 only supports direct-io via iomap.

[1]: https://lore.kernel.org/linux-xfs/cover.1729825985.git.ritesh.list@gmail.com/T/#m9dbecc11bed713ed0d7a486432c56b105b555f04
Suggested-by: Darrick J. Wong <djwong@kernel.org> # inline helper
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext4/file.c  |  7 +++++++
 fs/ext4/inode.c | 27 ++++++++++++++++++++++-----
 2 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 96d936f5584b..a7de03e47db0 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -599,6 +599,13 @@ static ssize_t ext4_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)
 		ssize_t err;
 		loff_t endbyte;

+		/*
+		 * There is no support for atomic writes on buffered-io yet,
+		 * we should never fallback to buffered-io for DIO atomic
+		 * writes.
+		 */
+		WARN_ON_ONCE(iocb->ki_flags & IOCB_ATOMIC);
+
 		offset = iocb->ki_pos;
 		err = ext4_buffered_write_iter(iocb, from);
 		if (err < 0)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3e827cfa762e..5b9eeb74ce47 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3444,17 +3444,34 @@ static int ext4_iomap_overwrite_begin(struct inode *inode, loff_t offset,
 	return ret;
 }

+static inline bool ext4_want_directio_fallback(unsigned flags, ssize_t written)
+{
+	/* must be a directio to fall back to buffered */
+	if ((flags & (IOMAP_WRITE | IOMAP_DIRECT)) !=
+		    (IOMAP_WRITE | IOMAP_DIRECT))
+		return false;
+
+	/* atomic writes are all-or-nothing */
+	if (flags & IOMAP_ATOMIC)
+		return false;
+
+	/* can only try again if we wrote nothing */
+	return written == 0;
+}
+
 static int ext4_iomap_end(struct inode *inode, loff_t offset, loff_t length,
 			  ssize_t written, unsigned flags, struct iomap *iomap)
 {
 	/*
 	 * Check to see whether an error occurred while writing out the data to
-	 * the allocated blocks. If so, return the magic error code so that we
-	 * fallback to buffered I/O and attempt to complete the remainder of
-	 * the I/O. Any blocks that may have been allocated in preparation for
-	 * the direct I/O will be reused during buffered I/O.
+	 * the allocated blocks. If so, return the magic error code for
+	 * non-atomic write so that we fallback to buffered I/O and attempt to
+	 * complete the remainder of the I/O.
+	 * For non-atomic writes, any blocks that may have been
+	 * allocated in preparation for the direct I/O will be reused during
+	 * buffered I/O. For atomic write, we never fallback to buffered-io.
 	 */
-	if (flags & (IOMAP_WRITE | IOMAP_DIRECT) && written == 0)
+	if (ext4_want_directio_fallback(flags, written))
 		return -ENOTBLK;

 	return 0;
--
2.46.0


  parent reply	other threads:[~2024-11-01  6:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-01  6:50 [PATCH v4 0/4] ext4: Add atomic writes support for DIO Ritesh Harjani (IBM)
2024-11-01  6:50 ` [PATCH v4 1/4] ext4: Add statx support for atomic writes Ritesh Harjani (IBM)
2024-11-01 11:17   ` Jan Kara
2024-11-01 15:12   ` Darrick J. Wong
2024-11-01 16:00   ` John Garry
2024-11-01 17:23     ` Ritesh Harjani
2024-11-01  6:50 ` [PATCH v4 2/4] ext4: Check for atomic writes support in write iter Ritesh Harjani (IBM)
2024-11-01 11:15   ` Jan Kara
2024-11-01  6:50 ` [PATCH v4 3/4] ext4: Support setting FMODE_CAN_ATOMIC_WRITE Ritesh Harjani (IBM)
2024-11-01 11:14   ` Jan Kara
2024-11-01  6:50 ` Ritesh Harjani (IBM) [this message]
2024-11-01 11:13   ` [PATCH v4 4/4] ext4: Do not fallback to buffered-io for DIO atomic write Jan Kara
2024-11-01 14:46   ` Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=78fb5c40dde4847dc32af09e668a6f81fa251137.1730437365.git.ritesh.list@gmail.com \
    --to=ritesh.list@gmail.com \
    --cc=david@fromorbit.com \
    --cc=djwong@kernel.org \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=john.g.garry@oracle.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=ojaswin@linux.ibm.com \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®