From: "André Apitzsch" <git@apitzsch.eu>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Daniel Scally <djrscally@gmail.com>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org, Val Packett <val@packett.cool>
Subject: Re: [PATCH v2 0/8] media: i2c: dw9719: add DT compatible and DW9718S support
Date: Mon, 20 Oct 2025 22:40:53 +0200 [thread overview]
Message-ID: <790fd7d05fa03f788f0a628a99b2e127db824207.camel@apitzsch.eu> (raw)
In-Reply-To: <20250920-dw9719-v2-0-028cdaa156e5@apitzsch.eu>
Hi,
Am Samstag, dem 20.09.2025 um 14:03 +0200 schrieb André Apitzsch via B4
Relay:
> The DW9718S voice coil motor is found on various smartphones like
> motorola-nora that are currently being worked on in the postmarketOS
> community. Since the way it operates is very similar to DW9719, this
> patch series adds support for it to the existing dw9719 driver.
> Because
> that driver did not yet support DT, we also add DT bindings and the
> dongwoon,dw9719 ofw compatible. With DW9718S, the driver was
> tested fully, including runtime PM.
>
> This is a follow-up of [1] and [2].
>
> Changes compared to previous submission:
> * Deprecate dongwoon,vcm-freq in favor of dongwoon,vcm-prescale
> * Instead of per-device config struct use model ID to handle cases
>
> [1]
> https://lore.kernel.org/linux-media/20250210082035.8670-1-val@packett.cool/
> [2]
> https://lore.kernel.org/linux-media/20250209-dw9761dts-v3-0-14d3f00f0585@apitzsch.eu/
>
> Signed-off-by: André Apitzsch <git@apitzsch.eu>
> ---
> Changes in v2:
> - Add patch (3) which removes i2c device table
> - Restructure patches because of that
> - keep patches 1 and 2
> - add patch 3
> - patch 6 becomes patch 4
> - patch 3 becomes patch 5
> - patch 4 becomes patch 6
> - patch 5 becomes patch 7
> - patch 7 becomes patch 8
> - Patch 1 (bindings)
> - Remove unneeded 'minimum: 0'
> - Remove if/then that handles 'default' to reduce complexity
> - Add myself as maintainer
> - Patch 5
> - Fix void-pointer-to-enum-cast warning
> - Patch 7
> - Drop pm_runtime_mark_last_busy(); it is already called by
> pm_runtime_put_autosuspend()
> - Patch 8
> - Remove extra parentheses
> - Print error if writing to power register fails
> - Add reason for doubled waiting time during power up to comment
> - Pass NULL instead of unused 'ret' to cci_write()
> - Link to v1:
> https://lore.kernel.org/r/20250817-dw9719-v1-0-426f46c69a5a@apitzsch.eu
>
> ---
> André Apitzsch (3):
> dt-bindings: media: i2c: Add DW9718S, DW9719 and DW9761 VCM
> media: i2c: dw9719: Deprecate dongwoon,vcm-freq
> media: i2c: dw9719: Remove unused i2c device id table
>
> Val Packett (5):
> media: i2c: dw9719: Add an of_match_table
> media: i2c: dw9719: Add driver_data matching
> media: i2c: dw9719: Add DW9718S support
> media: i2c: dw9719: Update PM last busy time upon close
> media: i2c: dw9719: Fix power on/off sequence
>
> .../bindings/media/i2c/dongwoon,dw9719.yaml | 88
> +++++++++++++++++
> drivers/media/i2c/dw9719.c | 110
> +++++++++++++++++----
> 2 files changed, 178 insertions(+), 20 deletions(-)
> ---
> base-commit: 846bd2225ec3cfa8be046655e02b9457ed41973e
> change-id: 20250709-dw9719-8a8822efc1b1
>
Gentle ping.
Best regards,
André
next prev parent reply other threads:[~2025-10-20 20:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-20 12:03 André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 1/8] dt-bindings: media: i2c: Add DW9718S, DW9719 and DW9761 VCM André Apitzsch via B4 Relay
2025-09-22 20:25 ` Rob Herring (Arm)
2025-10-20 20:44 ` Krzysztof Kozlowski
2025-09-20 12:03 ` [PATCH v2 2/8] media: i2c: dw9719: Deprecate dongwoon,vcm-freq André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 3/8] media: i2c: dw9719: Remove unused i2c device id table André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 4/8] media: i2c: dw9719: Add an of_match_table André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 5/8] media: i2c: dw9719: Add driver_data matching André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 6/8] media: i2c: dw9719: Add DW9718S support André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 7/8] media: i2c: dw9719: Update PM last busy time upon close André Apitzsch via B4 Relay
2025-09-20 12:03 ` [PATCH v2 8/8] media: i2c: dw9719: Fix power on/off sequence André Apitzsch via B4 Relay
2025-10-20 20:40 ` André Apitzsch [this message]
2025-10-20 20:45 ` [PATCH v2 0/8] media: i2c: dw9719: add DT compatible and DW9718S support Krzysztof Kozlowski
2025-10-21 7:29 ` Sakari Ailus
2025-10-21 20:08 ` André Apitzsch
2025-10-22 6:43 ` Sakari Ailus
2025-10-21 19:56 ` André Apitzsch
2025-10-21 20:06 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=790fd7d05fa03f788f0a628a99b2e127db824207.camel@apitzsch.eu \
--to=git@apitzsch.eu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djrscally@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=val@packett.cool \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®