Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 21/12/2022 06:42, Bhavya Kapoor wrote:
> 
> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>> for 8 channel ADCs for J721s2 SoC.
>>>
>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>>> ---
>>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> index a7aa6cf08acd..67593aa69327 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>   	phys = <&transceiver2>;
>>>   };
>>> +
>>> +&tscadc0 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> +
>>> +&tscadc1 {
>>> +	status = "okay";
>>> +	adc {
>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>> +	};
>>> +};
>>> \ No newline at end of file
>> This is a friendly reminder during the review process.
>>
>> It seems my previous comments were not fully addressed. Maybe my
>> feedback got lost between the quotes, maybe you just forgot to apply it.
>> Please go back to the previous discussion and either implement all
>> requested changes or keep discussing them.
>>
>> Thank you.
>>
>> Best regards,
>> Krzysztof
> 
> Hi , I thought i did addressed the feedback since tscadc is just a 
> wrapper node.
> 
> The actual adc node is inside of tscadc node.

Read the feedback, from all emails.
Best regards,
Krzysztof