From: Song Liu <songliubraving@fb.com>
To: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Kernel Team <Kernel-team@fb.com>,
"Arnaldo Carvalho de Melo" <acme@redhat.com>,
Jiri Olsa <jolsa@kernel.org>
Subject: Re: [PATCH v2 0/3] perf-stat: share hardware PMCs with BPF
Date: Thu, 18 Mar 2021 03:52:51 +0000 [thread overview]
Message-ID: <7D48A756-C253-48DE-B536-826314778404@fb.com> (raw)
In-Reply-To: <YFH//FRPvrPswhld@kernel.org>
> On Mar 17, 2021, at 6:11 AM, Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
>
> Em Wed, Mar 17, 2021 at 02:29:28PM +0900, Namhyung Kim escreveu:
>> Hi Song,
>>
>> On Wed, Mar 17, 2021 at 6:18 AM Song Liu <songliubraving@fb.com> wrote:
>>>
>>> perf uses performance monitoring counters (PMCs) to monitor system
>>> performance. The PMCs are limited hardware resources. For example,
>>> Intel CPUs have 3x fixed PMCs and 4x programmable PMCs per cpu.
>>>
>>> Modern data center systems use these PMCs in many different ways:
>>> system level monitoring, (maybe nested) container level monitoring, per
>>> process monitoring, profiling (in sample mode), etc. In some cases,
>>> there are more active perf_events than available hardware PMCs. To allow
>>> all perf_events to have a chance to run, it is necessary to do expensive
>>> time multiplexing of events.
>>>
>>> On the other hand, many monitoring tools count the common metrics (cycles,
>>> instructions). It is a waste to have multiple tools create multiple
>>> perf_events of "cycles" and occupy multiple PMCs.
>>
>> Right, it'd be really helpful when the PMCs are frequently or mostly shared.
>> But it'd also increase the overhead for uncontended cases as BPF programs
>> need to run on every context switch. Depending on the workload, it may
>> cause a non-negligible performance impact. So users should be aware of it.
>
> Would be interesting to, humm, measure both cases to have a firm number
> of the impact, how many instructions are added when sharing using
> --bpf-counters?
>
> I.e. compare the "expensive time multiplexing of events" with its
> avoidance by using --bpf-counters.
>
> Song, have you perfmormed such measurements?
I have got some measurements with perf-bench-sched-messaging:
The system: x86_64 with 23 cores (46 HT)
The perf-stat command:
perf stat -e cycles,cycles,instructions,instructions,ref-cycles,ref-cycles <target, etc.>
The benchmark command and output:
./perf bench sched messaging -g 40 -l 50000 -t
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 40 groups == 1600 threads run
Total time: 10X.XXX [sec]
I use the "Total time" as measurement, so smaller number is better.
For each condition, I run the command 5 times, and took the median of
"Total time".
Baseline (no perf-stat) 104.873 [sec]
# global
perf stat -a 107.887 [sec]
perf stat -a --bpf-counters 106.071 [sec]
# per task
perf stat 106.314 [sec]
perf stat --bpf-counters 105.965 [sec]
# per cpu
perf stat -C 1,3,5 107.063 [sec]
perf stat -C 1,3,5 --bpf-counters 106.406 [sec]
From the data, --bpf-counters is slightly better than the regular event
for all targets. I noticed that the results are not very stable. There
are a couple 108.xx runs in some of the conditions (w/ and w/o
--bpf-counters).
I also measured the average runtime of the BPF programs, with
sysctl kernel.bpf_stats_enabled=1
For each event, if we have one leader and two followers, the total run
time is about 340ns. IOW, 340ns for two perf-stat reading instructions,
340ns for two perf-stat reading cycles, etc.
Thanks,
Song
next prev parent reply other threads:[~2021-03-18 3:53 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 21:18 Song Liu
2021-03-16 21:18 ` [PATCH v2 1/3] perf-stat: introduce bperf, " Song Liu
2021-03-18 5:54 ` Namhyung Kim
2021-03-18 7:22 ` Song Liu
2021-03-18 13:49 ` Namhyung Kim
2021-03-18 17:16 ` Song Liu
2021-03-18 21:15 ` Jiri Olsa
2021-03-19 18:41 ` Arnaldo Carvalho de Melo
2021-03-19 18:55 ` Jiri Olsa
2021-03-19 22:06 ` Song Liu
2021-03-23 0:53 ` Song Liu
2021-03-23 12:25 ` Arnaldo Carvalho de Melo
2021-03-23 12:37 ` Arnaldo Carvalho de Melo
2021-03-23 18:27 ` Arnaldo Carvalho de Melo
2021-03-16 21:18 ` [PATCH v2 2/3] perf-stat: measure t0 and ref_time after enable_counters() Song Liu
2021-03-16 21:18 ` [PATCH v2 3/3] perf-test: add a test for perf-stat --bpf-counters option Song Liu
2021-03-18 6:07 ` Namhyung Kim
2021-03-18 7:39 ` Song Liu
2021-03-17 5:29 ` [PATCH v2 0/3] perf-stat: share hardware PMCs with BPF Namhyung Kim
2021-03-17 9:19 ` Jiri Olsa
2021-03-17 13:11 ` Arnaldo Carvalho de Melo
2021-03-18 3:52 ` Song Liu [this message]
2021-03-18 4:32 ` Namhyung Kim
2021-03-18 7:03 ` Song Liu
2021-03-18 21:14 ` Jiri Olsa
2021-03-19 0:09 ` Arnaldo
2021-03-19 0:22 ` Song Liu
2021-03-19 0:54 ` Namhyung Kim
2021-03-19 15:35 ` Arnaldo Carvalho de Melo
2021-03-19 15:58 ` Namhyung Kim
2021-03-19 16:14 ` Song Liu
2021-03-23 21:10 ` Arnaldo Carvalho de Melo
2021-03-23 21:26 ` Song Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7D48A756-C253-48DE-B536-826314778404@fb.com \
--to=songliubraving@fb.com \
--cc=Kernel-team@fb.com \
--cc=acme@kernel.org \
--cc=acme@redhat.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=namhyung@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®