From: cstsai <cstsai@itri.org.tw>
To: "Kumar, Anil" <anilkumar.v@ti.com>,
<linux-watchdog@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<davinci-linux-open-source@linux.davincidsp.com>
Cc: <wim@iguana.be>
Subject: Please don't send update emails to me
Date: Mon, 18 Feb 2013 13:06:17 +0800 [thread overview]
Message-ID: <7DA556E28C7948C9BD691C07031FE87B@520A0002602> (raw)
In-Reply-To: <F3DBB1B3EF102E4994C89758CFCA32412C9258@DBDE01.ent.ti.com>
Please don't send update emails to me
Whenever I need I can check from website
Thanks & Regards
Chun-Shian Tsai
----- Original Message -----
From: "Kumar, Anil" <anilkumar.v@ti.com>
To: <linux-watchdog@vger.kernel.org>; <linux-kernel@vger.kernel.org>;
<davinci-linux-open-source@linux.davincidsp.com>
Cc: <wim@iguana.be>
Sent: Monday, February 18, 2013 11:42 AM
Subject: RE: [PATCH V2] watchdog: davinci_wdt: update to devm_* API
Hi,
On Fri, Feb 08, 2013 at 13:09:30, Kumar, Anil wrote:
> Update the code to use devm_* API so that driver
> core will manage resources.
>
> Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
> ---
> This patch applies on top of v3.8-rc6.
>
> Tested on da850 EVM.
>
> Changes for V2:
> - Use return -EADDRNOTAVAIL in case of devm_request_and_ioremap() fail.
> - Use devm_clk_get() instead of clk_get().
> - Revert back the change for *dev.
> - Removes static type for "wdt_mem" structure as it is used only
> inside the function now.
>
Gentle Ping. As there are no review comments on this patch,
Could you please pull this patch ?
> :100644 100644 e8e8724... 7df1fdc... M drivers/watchdog/davinci_wdt.c
> drivers/watchdog/davinci_wdt.c | 29 ++++++-----------------------
> 1 files changed, 6 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/watchdog/davinci_wdt.c
> b/drivers/watchdog/davinci_wdt.c
> index e8e8724..7df1fdc 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -69,7 +69,6 @@ static unsigned long wdt_status;
> #define WDT_REGION_INITED 2
> #define WDT_DEVICE_INITED 3
>
> -static struct resource *wdt_mem;
> static void __iomem *wdt_base;
> struct clk *wdt_clk;
>
> @@ -201,10 +200,11 @@ static struct miscdevice davinci_wdt_miscdev = {
>
> static int davinci_wdt_probe(struct platform_device *pdev)
> {
> - int ret = 0, size;
> + int ret = 0;
> struct device *dev = &pdev->dev;
> + struct resource *wdt_mem;
>
> - wdt_clk = clk_get(dev, NULL);
> + wdt_clk = devm_clk_get(dev, NULL);
> if (WARN_ON(IS_ERR(wdt_clk)))
> return PTR_ERR(wdt_clk);
>
> @@ -221,43 +221,26 @@ static int davinci_wdt_probe(struct platform_device
> *pdev)
> return -ENOENT;
> }
>
> - size = resource_size(wdt_mem);
> - if (!request_mem_region(wdt_mem->start, size, pdev->name)) {
> - dev_err(dev, "failed to get memory region\n");
> - return -ENOENT;
> - }
> -
> - wdt_base = ioremap(wdt_mem->start, size);
> + wdt_base = devm_request_and_ioremap(dev, wdt_mem);
> if (!wdt_base) {
> - dev_err(dev, "failed to map memory region\n");
> - release_mem_region(wdt_mem->start, size);
> - wdt_mem = NULL;
> - return -ENOMEM;
> + dev_err(dev, "ioremap failed\n");
> + return -EADDRNOTAVAIL;
> }
>
> ret = misc_register(&davinci_wdt_miscdev);
> if (ret < 0) {
> dev_err(dev, "cannot register misc device\n");
> - release_mem_region(wdt_mem->start, size);
> - wdt_mem = NULL;
> } else {
> set_bit(WDT_DEVICE_INITED, &wdt_status);
> }
>
> - iounmap(wdt_base);
> return ret;
> }
>
> static int davinci_wdt_remove(struct platform_device *pdev)
> {
> misc_deregister(&davinci_wdt_miscdev);
> - if (wdt_mem) {
> - release_mem_region(wdt_mem->start, resource_size(wdt_mem));
> - wdt_mem = NULL;
> - }
> -
> clk_disable_unprepare(wdt_clk);
> - clk_put(wdt_clk);
>
> return 0;
> }
> --
> 1.7.4.1
>
>
Thanks,
Anil
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
====================================================================
This email may contain confidential information. Please do not use or disclose it in any way and delete it if you are not the intended recipient.
next prev parent reply other threads:[~2013-02-18 5:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 7:39 [PATCH V2] watchdog: davinci_wdt: update to devm_* API Kumar, Anil
2013-02-18 3:42 ` Kumar, Anil
2013-02-18 5:06 ` cstsai [this message]
2013-02-19 19:43 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7DA556E28C7948C9BD691C07031FE87B@520A0002602 \
--to=cstsai@itri.org.tw \
--cc=anilkumar.v@ti.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®