Re: [PATCH v2 3/3] arm64: dts: qcom: sc7280: Add wcd9380 pinmux

[Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>]

On 2/10/2022 5:33 AM, Stephen Boyd wrote:
Thanks for your time Stephen!!!
> Quoting Srinivasa Rao Mandadapu (2022-02-09 06:26:58)
>> On 2/9/2022 2:42 AM, Stephen Boyd wrote:
>>> Quoting Srinivasa Rao Mandadapu (2022-02-08 07:34:14)
>>>
>>>> +                       pins = "gpio83";
>>>> +                       function = "gpio";
>>>> +                       drive-strength = <16>;
>>>> +                       output-high;
>>>> +       };
>>>> +
>>>> +       wcd938x_reset_sleep: wcd938x_reset_sleep {
>>>> +                       pins = "gpio83";
>>>> +                       function = "gpio";
>>>> +                       drive-strength = <16>;
>>>> +                       bias-disable;
>>>> +                       output-low;
>>> Why doesn't the device drive the reset gpio by requesting the gpio and
>>> asserting and deasserting it? We shouldn't need to use pinctrl settings
>>> to toggle reset gpios.
>> Okay. Verified without these nodes and didn't see any impact. But
>> similar way it's mentioned in sm8250-mtp.dts. Could You please suggest
>> on it how to go ahead on this?.
> I'd expect the wcd938x codec device node to have a 'reset-gpios'
> property like
>
> 	reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>
>
> and then the driver to request that gpio via
>
> 	reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
>
> so it gets the gpio during driver probe. Then the gpio can be deasserted
> during suspend and reasserted on resume, if that's even important?
Okay will remove it. Already wcd938x node has reset gpio. It seems these 
are redundant.