Re: [PATCH net-next] net: dsa: qca8k: Initialize the switch with correct number of ports

["Michal Vokáč" <michal.vokac@ysoft.com>]

On 24. 10. 19 18:33, Florian Fainelli wrote:
> On 10/24/19 7:12 AM, Andrew Lunn wrote:
>> On Thu, Oct 24, 2019 at 03:46:58PM +0200, Michal Vokáč wrote:
>>> Since commit 0394a63acfe2 ("net: dsa: enable and disable all ports")
>>> the dsa core disables all unused ports of a switch. In this case
>>> disabling ports with numbers higher than QCA8K_NUM_PORTS causes that
>>> some switch registers are overwritten with incorrect content.
>>
>> Humm.
>>
>> The same problem might exist in other drivers:
>>
>> linux/drivers/net/dsa$ grep -r "ds->num_ports = DSA_MAX_PORTS"
>> qca8k.c:	priv->ds->num_ports = DSA_MAX_PORTS;
>> b53/b53_common.c:	ds->num_ports = DSA_MAX_PORTS;
> 
> Not for b53 because this later gets clamped with dev->num_ports in
> b53_setup().

I quickly checked the code and I think there is still an issue
in the b53_enable_port and b53_disable_port functions which are
called from the dsa_port_setup().

>> mt7530.c:	priv->ds->num_ports = DSA_MAX_PORTS;
>> microchip/ksz_common.c:	ds->num_ports = DSA_MAX_PORTS;

At first glance it looks like mt7530 and microchip has the same problem.

>> dsa_loop.c:	ds->num_ports = DSA_MAX_PORTS;
>>
>> dsa_loop.c looks O.K, it does support DSA_MAX_PORTS ports.
>>
>> But the others?
>>
>>      Andrew

I can respin and fix those drivers as well. Or a separate patch
for each one?

Michal