Re: [PATCH v5 16/18] thermal/drivers/tegra: Remove unneeded lock when setting a trip point

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 02/03/2023 10:47, Thierry Reding wrote:
> On Wed, Mar 01, 2023 at 09:14:44PM +0100, Daniel Lezcano wrote:
>> The function tegra_tsensor_enable_hw_channel() takes the thermal zone
>> lock to prevent "a potential" race with a call to set_trips()
>> callback.
>>
>> The driver must not play with the thermal framework core code
>> internals.
>>
>> The tegra_tsensor_enable_hw_channel() is called by:
>>
>>   - the suspend / resume callbacks
>>   - the probe function after the thermal zones are registered
>>
>> The thermal zone lock taken in this function is supposed to protect
>> from a call to the set_trips() callback which writes in the same
>> register.
>>
>> The potential race is when suspend / resume are called at the same
>> time as set_trips. This one is called only in
>> thermal_zone_device_update().
>>
>>   - At suspend time, the 'in_suspend' is set, thus the
>>     thermal_zone_device_update() bails out immediately and set_trips is
>>     not called during this moment.
>>
>>   - At resume time, the thermal zone is updated at PM_POST_SUSPEND,
>>     thus the driver has already set the TH2 temperature.
>>
>>   - At probe time, we register the thermal zone and then we set the
>>     TH2. The only scenario I can see so far is the interrupt fires, the
>>     thermal_zone_update() is called exactly at the moment
>>     tegra_tsensor_enable_hw_channel() a few lines after registering it.
>>
>> Enable the channels before setting up the interrupt. We close the
>> potential race window without using the thermal zone's lock.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Suggested-by: Thierry Reding <thierry.reding@gmail.com>
>> ---
>>   drivers/thermal/tegra/tegra30-tsensor.c | 25 ++++++++++++++-----------
>>   1 file changed, 14 insertions(+), 11 deletions(-)
> 
> Acked-by: Thierry Reding <treding@nvidia.com>

Thanks for your review

May I ask you to have a look at patch 2 and 8 ?

Thanks

   -- Daniel

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog