RE: [PATCH net] net: mvpp2: 10G modes aren't supported on all ports

[Stefan Chulski <stefanc@marvell.com>]

> -----Original Message-----
> From: netdev-owner@vger.kernel.org <netdev-owner@vger.kernel.org>
> On Behalf Of Russell King - ARM Linux
> Sent: Tuesday, December 11, 2018 6:37 PM
> To: Antoine Tenart <antoine.tenart@bootlin.com>
> Cc: davem@davemloft.net; netdev@vger.kernel.org; linux-
> kernel@vger.kernel.org; thomas.petazzoni@bootlin.com;
> maxime.chevallier@bootlin.com; gregory.clement@bootlin.com;
> miquel.raynal@bootlin.com; Nadav Haklai <nadavh@marvell.com>; Stefan
> Chulski <stefanc@marvell.com>; Yan Markman <ymarkman@marvell.com>;
> mw@semihalf.com; Baruch Siach <baruch@tkos.co.il>
> Subject: Re: [PATCH net] net: mvpp2: 10G modes aren't supported on all
> ports
> 
> On Tue, Dec 11, 2018 at 05:32:28PM +0100, Antoine Tenart wrote:
> > The mvpp2_phylink_validate() function sets all modes that are
> > supported by a given PPv2 port. A recent change made all ports to
> > advertise they support 10G modes in certain cases. This is not true,
> > as only the port #0 can do so. This patch fixes it.
> >
> > Fixes: 01b3fd5ac97c ("net: mvpp2: fix detection of 10G SFP modules")
> > Cc: Baruch Siach <baruch@tkos.co.il>
> > Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
> > ---
> >  drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
> >  1 file changed, 8 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > index 125ea99418df..88aa488054a8 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > @@ -4405,12 +4405,14 @@ static void mvpp2_phylink_validate(struct
> net_device *dev,
> >  	case PHY_INTERFACE_MODE_10GKR:
> >  	case PHY_INTERFACE_MODE_XAUI:
> 
> Are these modes supported on anything except port 0?  If not, you should be
> rejecting these, rather than just treating them as RGMII.

In CP115(which has PPv2) PHY_INTERFACE_MODE_10GKR supported on ports 0 and 1
PHY_INTERFACE_MODE_XAUI/PHY_INTERFACE_MODE_RXAUI supported only on port 0.

Best Regards.