From: gengdongjiu <gengdongjiu@huawei.com>
To: "Baicar, Tyler" <tbaicar@codeaurora.org>, <bp@suse.de>,
<james.morse@arm.com>, <geliangtang@gmail.com>,
<andriy.shevchenko@linux.intel.com>, <tony.luck@intel.com>,
<austinwc@codeaurora.org>, <rjw@rjwysocki.net>, <lenb@kernel.org>,
<linux-acpi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, <john.garry@huawei.com>,
<shiju.jose@huawei.com>, <zhengqiang10@huawei.com>,
<wangxiongfeng2@huawei.com>, <will.deacon@arm.com>,
<zjzhang@codeaurora.org>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: <huangshaoyu@huawei.com>, <wuquanming@huawei.com>
Subject: Re: [PATCH v3] acpi: apei: fix the wrongly iterate generic error status block
Date: Thu, 17 Aug 2017 11:09:31 +0800 [thread overview]
Message-ID: <7b881329-3bde-bd7a-71a0-be75f2fc5c32@huawei.com> (raw)
In-Reply-To: <1f5b068b-74a5-3be1-46ef-a1bb522c2791@codeaurora.org>
CC Will and Jonathan
On 2017/8/16 21:55, Baicar, Tyler wrote:
> On 8/16/2017 2:14 AM, Dongjiu Geng wrote:
>> The revision 0x300 generic error data entry is different
>> from the old version, but currently iterating through the
>> GHES estatus blocks does not take into account this difference.
>> This will lead to failure to get the right data entry if GHES
>> has revision 0x300 error data entry.
>>
>> Update the GHES estatus iteration to properly increment using
>> acpi_hest_get_next, and correct the iteration termination condition
>> because the status block data length only includes error data length.
>> Clear the CPER estatus printing iteration logic to use same macro.
>>
>> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
>> CC: Tyler Baicar <tbaicar@codeaurora.org>
> Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
>
> Works good for me!
>
> Thanks,
> Tyler
>> ---
>> drivers/acpi/apei/apei-internal.h | 5 -----
>> drivers/firmware/efi/cper.c | 12 ++----------
>> include/acpi/ghes.h | 5 +++++
>> 3 files changed, 7 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h
>> index 6e9f14c0a71b..cb4126051f62 100644
>> --- a/drivers/acpi/apei/apei-internal.h
>> +++ b/drivers/acpi/apei/apei-internal.h
>> @@ -120,11 +120,6 @@ int apei_exec_collect_resources(struct apei_exec_context *ctx,
>> struct dentry;
>> struct dentry *apei_get_debugfs_dir(void);
>> -#define apei_estatus_for_each_section(estatus, section) \
>> - for (section = (struct acpi_hest_generic_data *)(estatus + 1); \
>> - (void *)section - (void *)estatus < estatus->data_length; \
>> - section = (void *)(section+1) + section->error_data_length)
>> -
>> static inline u32 cper_estatus_len(struct acpi_hest_generic_status *estatus)
>> {
>> if (estatus->raw_data_length)
>> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
>> index 48a8f69da42a..bf3672a81e49 100644
>> --- a/drivers/firmware/efi/cper.c
>> +++ b/drivers/firmware/efi/cper.c
>> @@ -606,7 +606,6 @@ void cper_estatus_print(const char *pfx,
>> const struct acpi_hest_generic_status *estatus)
>> {
>> struct acpi_hest_generic_data *gdata;
>> - unsigned int data_len;
>> int sec_no = 0;
>> char newpfx[64];
>> __u16 severity;
>> @@ -617,14 +616,10 @@ void cper_estatus_print(const char *pfx,
>> "It has been corrected by h/w "
>> "and requires no further action");
>> printk("%s""event severity: %s\n", pfx, cper_severity_str(severity));
>> - data_len = estatus->data_length;
>> - gdata = (struct acpi_hest_generic_data *)(estatus + 1);
>> snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
>> - while (data_len >= acpi_hest_get_size(gdata)) {
>> + apei_estatus_for_each_section(estatus, gdata) {
>> cper_estatus_print_section(newpfx, gdata, sec_no);
>> - data_len -= acpi_hest_get_record_size(gdata);
>> - gdata = acpi_hest_get_next(gdata);
>> sec_no++;
>> }
>> }
>> @@ -653,15 +648,12 @@ int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
>> if (rc)
>> return rc;
>> data_len = estatus->data_length;
>> - gdata = (struct acpi_hest_generic_data *)(estatus + 1);
>> - while (data_len >= acpi_hest_get_size(gdata)) {
>> + apei_estatus_for_each_section(estatus, gdata) {
>> gedata_len = acpi_hest_get_error_length(gdata);
>> if (gedata_len > data_len - acpi_hest_get_size(gdata))
>> return -EINVAL;
>> -
>> data_len -= acpi_hest_get_record_size(gdata);
>> - gdata = acpi_hest_get_next(gdata);
>> }
>> if (data_len)
>> return -EINVAL;
>> diff --git a/include/acpi/ghes.h b/include/acpi/ghes.h
>> index 9f26e01186ae..9061c5c743b3 100644
>> --- a/include/acpi/ghes.h
>> +++ b/include/acpi/ghes.h
>> @@ -113,6 +113,11 @@ static inline void *acpi_hest_get_next(struct acpi_hest_generic_data *gdata)
>> return (void *)(gdata) + acpi_hest_get_record_size(gdata);
>> }
>> +#define apei_estatus_for_each_section(estatus, section) \
>> + for (section = (struct acpi_hest_generic_data *)(estatus + 1); \
>> + (void *)section - (void *)(estatus + 1) < estatus->data_length; \
>> + section = acpi_hest_get_next(section))
>> +
>> int ghes_notify_sea(void);
>> #endif /* GHES_H */
>
next prev parent reply other threads:[~2017-08-17 3:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 8:14 Dongjiu Geng
2017-08-16 13:55 ` Baicar, Tyler
2017-08-17 3:09 ` gengdongjiu [this message]
2017-08-17 9:25 ` Borislav Petkov
2017-08-17 10:45 ` gengdongjiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7b881329-3bde-bd7a-71a0-be75f2fc5c32@huawei.com \
--to=gengdongjiu@huawei.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=austinwc@codeaurora.org \
--cc=bp@suse.de \
--cc=catalin.marinas@arm.com \
--cc=geliangtang@gmail.com \
--cc=huangshaoyu@huawei.com \
--cc=james.morse@arm.com \
--cc=john.garry@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=rjw@rjwysocki.net \
--cc=shiju.jose@huawei.com \
--cc=tbaicar@codeaurora.org \
--cc=tony.luck@intel.com \
--cc=wangxiongfeng2@huawei.com \
--cc=will.deacon@arm.com \
--cc=wuquanming@huawei.com \
--cc=zhengqiang10@huawei.com \
--cc=zjzhang@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®