mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Badhri Jagan Sridharan <badhri@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kyle Tso <kyletso@google.com>
Subject: Re: [PATCH v2 1/3] usb: typec: tcpm: Add callbacks to mitigate wakeups due to contaminant
Date: Wed, 31 Aug 2022 10:51:23 -0700	[thread overview]
Message-ID: <7bf33aaa-11d3-2ff2-8c32-70e11340a3a9@roeck-us.net> (raw)
In-Reply-To: <Yw90JmdIxg/YdUYH@kuha.fi.intel.com>

On 8/31/22 07:45, Heikki Krogerus wrote:
> Hi Badhri,
> 
> On Tue, Aug 30, 2022 at 05:15:53PM -0700, Badhri Jagan Sridharan wrote:
>> On some of the TCPC implementations, when the Type-C port is exposed
>> to contaminants, such as water, TCPC stops toggling while reporting OPEN
>> either by the time TCPM reads CC pin status or during CC debounce
>> window. This causes TCPM to be stuck in TOGGLING state. If TCPM is made
>> to restart toggling, the behavior recurs causing redundant CPU wakeups
>> till the USB-C port is free of contaminant.
>>
>> [206199.287817] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
>> [206199.640337] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
>> [206199.985789] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
>> ...
>>
>> To mitigate redundant TCPM wakeups, TCPCs which do have the needed hardware
>> can implement the check_contaminant callback which is invoked by TCPM
>> to evaluate for presence of contaminant. Lower level TCPC driver can
>> restart toggling through TCPM_PORT_CLEAN event when the driver detects
>> that USB-C port is free of contaminant. check_contaminant callback also passes
>> the disconnect_while_debounce flag which when true denotes that the CC pins
>> transitioned to OPEN state during the CC debounce window.
> 
> I'm a little bit concerned about the size of the state machine. I
> think this is a special case that at least in the beginning only the
> Maxim port controller can support, but it's still mixed into the
> "generic" state machine.
> 
> How about if we just add "run_state_machine" callback for the port
> controller drivers so they can handle this kind of special cases on
> their own - they can then also add custom states?
> 

Same concern here. I would very much prefer an approach as suggested below,
especially since the changes around the added disconnect_while_debounce flag
are extensive and difficult to verify.

Thanks,
Guenter

> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 904c7b4ce2f0c..91c22945ba258 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4858,9 +4858,11 @@ static void run_state_machine(struct tcpm_port *port)
>                  tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0);
>                  break;
>          default:
> -               WARN(1, "Unexpected port state %d\n", port->state);
>                  break;
>          }
> +
> +       if (port->tcpc->run_state_machine)
> +               port->tcpc->run_state_machine(port->tcpc);
>   }
>   
>   static void tcpm_state_machine_work(struct kthread_work *work)
> 
> thanks,
> 


  reply	other threads:[~2022-08-31 17:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-31  0:15 Badhri Jagan Sridharan
2022-08-31  0:15 ` [PATCH v2 2/3] usb: typec: tcpci: Add callback for evaluating contaminant presence Badhri Jagan Sridharan
2022-08-31  0:15 ` [PATCH v2 3/3] usb: typec: maxim_contaminant: Implement check_contaminant callback Badhri Jagan Sridharan
2022-08-31 16:48   ` kernel test robot
2022-08-31 14:45 ` [PATCH v2 1/3] usb: typec: tcpm: Add callbacks to mitigate wakeups due to contaminant Heikki Krogerus
2022-08-31 17:51   ` Guenter Roeck [this message]
2022-12-04  8:46     ` Badhri Jagan Sridharan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7bf33aaa-11d3-2ff2-8c32-70e11340a3a9@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=badhri@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=kyletso@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®