From: Dilip Kota <eswara.kota@linux.intel.com>
To: broonie@kernel.org, robh@kernel.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, daniel.schwierzeck@gmail.com,
hauke@hauke-m.de, andriy.shevchenko@intel.com,
cheol.yong.kim@intel.com, chuanhua.lei@linux.intel.com,
qi-ming.wu@intel.com, Dilip Kota <eswara.kota@linux.intel.com>
Subject: [PATCH v2 7/8] dt-bindings: spi: Add support to Lightning Mountain SoC
Date: Fri, 17 Jul 2020 14:27:56 +0800 [thread overview]
Message-ID: <7d644e5d03ef534f719763e5c823c1673e53d1a5.1594957019.git.eswara.kota@linux.intel.com> (raw)
In-Reply-To: <efb650b0faa49a00788c4e0ca8ef7196bdba851d.1594957019.git.eswara.kota@linux.intel.com>
In-Reply-To: <efb650b0faa49a00788c4e0ca8ef7196bdba851d.1594957019.git.eswara.kota@linux.intel.com>
Add support to SPI controller on Intel Atom based Lightning Mountain
SoC which reuses the Lantiq SPI controller IP.
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/spi/spi-lantiq-ssc.txt | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index ce3230c8e28dc..76a3dd35f7960 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -1,11 +1,17 @@
Lantiq Synchronous Serial Controller (SSC) SPI master driver
Required properties:
-- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
+ "intel,lgm-spi"
- #address-cells: see spi-bus.txt
- #size-cells: see spi-bus.txt
- reg: address and length of the spi master registers
-- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+- interrupts:
+ For compatible "intel,lgm-ssc" - the common interrupt number for
+ all of tx rx & err interrupts.
+ or
+ For rest of the compatibles, should contain the "spi_rx", "spi_tx" and
+ "spi_err" interrupt.
Optional properties:
@@ -27,3 +33,14 @@ spi: spi@e100800 {
num-cs = <6>;
base-cs = <1>;
};
+
+ssc0: spi@e0800000 {
+ compatible = "intel,lgm-spi";
+ reg = <0xe0800000 0x400>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <35 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>;
+ clock-names = "freq", "gate";
+};
--
2.11.0
next prev parent reply other threads:[~2020-07-17 6:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-17 6:27 [PATCH v2 1/8] spi: lantiq: fix: Rx overflow error in full duplex mode Dilip Kota
2020-07-17 6:27 ` [PATCH v2 2/8] spi: lantiq: Add SMP support Dilip Kota
2020-07-17 6:27 ` [PATCH v2 3/8] spi: lantiq: Move interrupt control register offesets to SoC specific data structure Dilip Kota
2020-07-17 6:27 ` [PATCH v2 4/8] spi: lantiq: Add support to acknowledge interrupt Dilip Kota
2020-07-17 6:27 ` [PATCH v2 5/8] spi: lantiq: Add fifo size bit mask in SoC specific data structure Dilip Kota
2020-07-17 6:27 ` [PATCH v2 6/8] spi: lantiq: Move interrupt configuration to " Dilip Kota
2020-07-17 6:27 ` Dilip Kota [this message]
2020-07-17 6:27 ` [PATCH v2 8/8] spi: lantiq: Add support to Lightning Mountain SoC Dilip Kota
2020-07-22 13:45 ` [PATCH v2 1/8] spi: lantiq: fix: Rx overflow error in full duplex mode Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d644e5d03ef534f719763e5c823c1673e53d1a5.1594957019.git.eswara.kota@linux.intel.com \
--to=eswara.kota@linux.intel.com \
--cc=andriy.shevchenko@intel.com \
--cc=broonie@kernel.org \
--cc=cheol.yong.kim@intel.com \
--cc=chuanhua.lei@linux.intel.com \
--cc=daniel.schwierzeck@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hauke@hauke-m.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=qi-ming.wu@intel.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®