From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Johnson Wang <johnson.wang@mediatek.com>,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
sboyd@kernel.org
Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Project_Global_Chrome_Upstream_Group@mediatek.com,
kuan-hsin.lee@mediatek.com, yu-chang.wang@mediatek.com,
Edward-JW Yang <edward-jw.yang@mediatek.com>
Subject: Re: [PATCH v3 1/4] clk: mediatek: Export PLL operations symbols
Date: Thu, 29 Sep 2022 15:07:53 +0200 [thread overview]
Message-ID: <7dff6595-f3e1-5a2e-0a81-2f3bf1903f12@collabora.com> (raw)
In-Reply-To: <20220929114624.16809-2-johnson.wang@mediatek.com>
Il 29/09/22 13:46, Johnson Wang ha scritto:
> Export PLL operations and register functions for different type
> of clock driver used.
>
> Co-developed-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
> Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
> ---
> drivers/clk/mediatek/clk-pll.c | 84 ++++++++++++++--------------------
> drivers/clk/mediatek/clk-pll.h | 56 +++++++++++++++++++++++
> 2 files changed, 90 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index 54e6cfd29dfc..a4eca5fd539c 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c
> @@ -27,37 +27,10 @@
>
> #define AUDPLL_TUNER_EN BIT(31)
>
> -#define POSTDIV_MASK 0x7
> -
> /* default 7 bits integer, can be overridden with pcwibits. */
> #define INTEGER_BITS 7
>
> -/*
> - * MediaTek PLLs are configured through their pcw value. The pcw value describes
> - * a divider in the PLL feedback loop which consists of 7 bits for the integer
> - * part and the remaining bits (if present) for the fractional part. Also they
> - * have a 3 bit power-of-two post divider.
> - */
> -
> -struct mtk_clk_pll {
> - struct clk_hw hw;
> - void __iomem *base_addr;
> - void __iomem *pd_addr;
> - void __iomem *pwr_addr;
> - void __iomem *tuner_addr;
> - void __iomem *tuner_en_addr;
> - void __iomem *pcw_addr;
> - void __iomem *pcw_chg_addr;
> - void __iomem *en_addr;
> - const struct mtk_pll_data *data;
> -};
> -
> -static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw)
> -{
> - return container_of(hw, struct mtk_clk_pll, hw);
> -}
> -
> -static int mtk_pll_is_prepared(struct clk_hw *hw)
> +int mtk_pll_is_prepared(struct clk_hw *hw)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
>
> @@ -161,8 +134,8 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
> * @fin: The input frequency
> *
> */
> -static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> - u32 freq, u32 fin)
> +void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> + u32 freq, u32 fin)
> {
> unsigned long fmin = pll->data->fmin ? pll->data->fmin : (1000 * MHZ);
> const struct mtk_pll_div_table *div_table = pll->data->div_table;
> @@ -198,8 +171,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
> *pcw = (u32)_pcw;
> }
>
> -static int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long parent_rate)
> +int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
> u32 pcw = 0;
> @@ -211,8 +184,7 @@ static int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> return 0;
> }
>
> -static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw,
> - unsigned long parent_rate)
> +unsigned long mtk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
> u32 postdiv;
> @@ -227,8 +199,8 @@ static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw,
> return __mtk_pll_recalc_rate(pll, parent_rate, pcw, postdiv);
> }
>
> -static long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long *prate)
> +long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
> u32 pcw = 0;
> @@ -239,7 +211,7 @@ static long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> return __mtk_pll_recalc_rate(pll, *prate, pcw, postdiv);
> }
>
> -static int mtk_pll_prepare(struct clk_hw *hw)
> +int mtk_pll_prepare(struct clk_hw *hw)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
> u32 r;
> @@ -273,7 +245,7 @@ static int mtk_pll_prepare(struct clk_hw *hw)
> return 0;
> }
>
> -static void mtk_pll_unprepare(struct clk_hw *hw)
> +void mtk_pll_unprepare(struct clk_hw *hw)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
> u32 r;
> @@ -301,7 +273,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
> writel(r, pll->pwr_addr);
> }
>
> -static const struct clk_ops mtk_pll_ops = {
> +const struct clk_ops mtk_pll_ops = {
> .is_prepared = mtk_pll_is_prepared,
> .prepare = mtk_pll_prepare,
> .unprepare = mtk_pll_unprepare,
> @@ -310,18 +282,15 @@ static const struct clk_ops mtk_pll_ops = {
> .set_rate = mtk_pll_set_rate,
> };
>
> -static struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data,
> - void __iomem *base)
> +struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll,
> + const struct mtk_pll_data *data,
> + void __iomem *base,
> + const struct clk_ops *pll_ops)
> {
> - struct mtk_clk_pll *pll;
> struct clk_init_data init = {};
> int ret;
> const char *parent_name = "clk26m";
>
> - pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> - if (!pll)
> - return ERR_PTR(-ENOMEM);
> -
> pll->base_addr = base + data->reg;
> pll->pwr_addr = base + data->pwr_reg;
> pll->pd_addr = base + data->pd_reg;
> @@ -343,7 +312,7 @@ static struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data,
>
> init.name = data->name;
> init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0;
> - init.ops = &mtk_pll_ops;
> + init.ops = pll_ops;
> if (data->parent_name)
> init.parent_names = &data->parent_name;
> else
> @@ -360,7 +329,22 @@ static struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data,
> return &pll->hw;
> }
>
> -static void mtk_clk_unregister_pll(struct clk_hw *hw)
> +struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data,
> + void __iomem *base)
> +{
> + struct mtk_clk_pll *pll;
> + struct clk_hw *hw;
> +
> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> + if (!pll)
> + return ERR_PTR(-ENOMEM);
> +
> + hw = mtk_clk_register_pll_ops(pll, data, base, &mtk_pll_ops);
> +
> + return hw;
> +}
> +
> +void mtk_clk_unregister_pll(struct clk_hw *hw)
> {
> struct mtk_clk_pll *pll;
>
> @@ -423,8 +407,8 @@ int mtk_clk_register_plls(struct device_node *node,
> }
> EXPORT_SYMBOL_GPL(mtk_clk_register_plls);
>
> -static __iomem void *mtk_clk_pll_get_base(struct clk_hw *hw,
> - const struct mtk_pll_data *data)
> +__iomem void *mtk_clk_pll_get_base(struct clk_hw *hw,
> + const struct mtk_pll_data *data)
> {
> struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
>
> diff --git a/drivers/clk/mediatek/clk-pll.h b/drivers/clk/mediatek/clk-pll.h
> index fe3199715688..e87ab08eea9b 100644
> --- a/drivers/clk/mediatek/clk-pll.h
> +++ b/drivers/clk/mediatek/clk-pll.h
> @@ -7,6 +7,7 @@
> #ifndef __DRV_CLK_MTK_PLL_H
> #define __DRV_CLK_MTK_PLL_H
>
> +#include <linux/clk-provider.h>
> #include <linux/types.h>
>
> struct clk_ops;
> @@ -20,6 +21,7 @@ struct mtk_pll_div_table {
>
> #define HAVE_RST_BAR BIT(0)
> #define PLL_AO BIT(1)
> +#define POSTDIV_MASK 0x7
While moving this, can you please also fixup declaring this mask as GENMASK()?
#define POSTDIV_MASK GENMASK(2, 0)
>
> struct mtk_pll_data {
> int id;
> @@ -48,10 +50,64 @@ struct mtk_pll_data {
> u8 pll_en_bit; /* Assume 0, indicates BIT(0) by default */
> };
>
> +/*
> + * MediaTek PLLs are configured through their pcw value. The pcw value describes
> + * a divider in the PLL feedback loop which consists of 7 bits for the integer
> + * part and the remaining bits (if present) for the fractional part. Also they
> + * have a 3 bit power-of-two post divider.
> + */
> +
> +struct mtk_clk_pll {
> + struct clk_hw hw;
> + void __iomem *base_addr;
> + void __iomem *pd_addr;
> + void __iomem *pwr_addr;
> + void __iomem *tuner_addr;
> + void __iomem *tuner_en_addr;
> + void __iomem *pcw_addr;
> + void __iomem *pcw_chg_addr;
> + void __iomem *en_addr;
> + const struct mtk_pll_data *data;
> +};
> +
> +
Please drop this extra newline.
Thanks,
Angelo
next prev parent reply other threads:[~2022-09-29 13:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 11:46 [PATCH v3 0/4] Introduce MediaTek frequency hopping driver Johnson Wang
2022-09-29 11:46 ` [PATCH v3 1/4] clk: mediatek: Export PLL operations symbols Johnson Wang
2022-09-29 13:07 ` AngeloGioacchino Del Regno [this message]
2022-10-06 11:24 ` Johnson Wang (王聖鑫)
2022-09-29 11:46 ` [PATCH v3 2/4] dt-bindings: arm: mediatek: Add new bindings of MediaTek frequency hopping Johnson Wang
2022-09-29 13:07 ` AngeloGioacchino Del Regno
2022-09-30 19:07 ` Rob Herring
2022-10-06 11:23 ` Johnson Wang (王聖鑫)
2022-10-06 12:33 ` AngeloGioacchino Del Regno
2022-10-11 6:55 ` Johnson Wang (王聖鑫)
2022-09-30 19:07 ` Rob Herring
2022-09-29 11:46 ` [PATCH v3 3/4] clk: mediatek: Add new clock driver to handle FHCTL hardware Johnson Wang
2022-09-29 11:46 ` [PATCH v3 4/4] clk: mediatek: Change PLL register API for MT8186 Johnson Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7dff6595-f3e1-5a2e-0a81-2f3bf1903f12@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=edward-jw.yang@mediatek.com \
--cc=johnson.wang@mediatek.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuan-hsin.lee@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=yu-chang.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®