From: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
To: "pengpeng@iscas.ac.cn" <pengpeng@iscas.ac.cn>,
"idryomov@gmail.com" <idryomov@gmail.com>,
Alex Markuze <amarkuze@redhat.com>
Cc: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>,
"slava@dubeyko.com" <slava@dubeyko.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v4] ceph: bound encrypted snapshot suffix formatting
Date: Fri, 10 Apr 2026 20:46:25 +0000 [thread overview]
Message-ID: <7e043aa928f13d043552ca650808c0383209f806.camel@ibm.com> (raw)
In-Reply-To: <847376cbf4408d12389545142311cb5883045937.camel@ibm.com>
On Fri, 2026-04-10 at 20:40 +0000, Viacheslav Dubeyko wrote:
> On Thu, 2026-04-09 at 18:09 +0000, Viacheslav Dubeyko wrote:
> > On Thu, 2026-04-09 at 10:39 +0800, Pengpeng Hou wrote:
> > > ceph_encode_encrypted_dname() base64-encodes the encrypted snapshot
> > > name into the caller buffer and then, for long snapshot names, appends
> > > _<ino> with sprintf(p + elen, ...).
> > >
> > > Some callers only provide NAME_MAX bytes. For long snapshot names, a
> > > large inode suffix can push the final encoded name past NAME_MAX even
> > > though the encrypted prefix stayed within the documented 240-byte
> > > budget.
> > >
> > > Format the suffix into a small local buffer first and reject names
> > > whose suffix would exceed the caller's NAME_MAX output buffer.
> > >
> > > Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
> > > ---
> > > Changes since v3:
> > > - reject `elen > 240` explicitly instead of relying only on the earlier
> > > `WARN_ON()`
> > > - rewrite the NAME_MAX bound check in terms of the final total length
> > > instead of `NAME_MAX - prefix_len - elen`
> > >
> > > fs/ceph/crypto.c | 31 +++++++++++++++++++++++++++++--
> > > 1 file changed, 29 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/fs/ceph/crypto.c b/fs/ceph/crypto.c
> > > index f3de43ccb470..42e3fff34697 100644
> > > --- a/fs/ceph/crypto.c
> > > +++ b/fs/ceph/crypto.c
> > > @@ -15,6 +15,12 @@
> > > #include "mds_client.h"
> > > #include "crypto.h"
> > >
> > > +/*
> > > + * Reserve room for '_' + decimal 64-bit inode number + trailing NUL.
> > > + * ceph_encode_encrypted_dname() copies only the visible suffix bytes.
> > > + */
> > > +#define CEPH_ENCRYPTED_SNAP_INO_SUFFIX_MAX sizeof("_18446744073709551615")
> > > +
> > > static int ceph_crypt_get_context(struct inode *inode, void *ctx, size_t len)
> > > {
> > > struct ceph_inode_info *ci = ceph_inode(inode);
> > > @@ -209,6 +215,7 @@ int ceph_encode_encrypted_dname(struct inode *parent, char *buf, int elen)
> > > struct inode *dir = parent;
> > > char *p = buf;
> > > u32 len;
> > > + int prefix_len = 0;
> > > int name_len = elen;
> > > int ret;
> > > u8 *cryptbuf = NULL;
> > > @@ -219,6 +226,7 @@ int ceph_encode_encrypted_dname(struct inode *parent, char *buf, int elen)
> > > if (IS_ERR(dir))
> > > return PTR_ERR(dir);
> > > p++; /* skip initial '_' */
> > > + prefix_len = 1;
> > > }
> > >
> > > if (!fscrypt_has_encryption_key(dir))
> > > @@ -271,8 +279,27 @@ int ceph_encode_encrypted_dname(struct inode *parent, char *buf, int elen)
> > >
> > > /* To understand the 240 limit, see CEPH_NOHASH_NAME_MAX comments */
> > > WARN_ON(elen > 240);
> > > - if (dir != parent) // leading _ is already there; append _<inum>
> > > - elen += 1 + sprintf(p + elen, "_%ld", dir->i_ino);
> > > + if (elen > 240) {
> > > + elen = -ENAMETOOLONG;
> > > + goto out;
> > > + }
> > > +
> > > + if (dir != parent) {
> > > + int total_len;
> > > + /* leading '_' is already there; append _<inum> */
> > > + char suffix[CEPH_ENCRYPTED_SNAP_INO_SUFFIX_MAX];
> > > +
> > > + ret = snprintf(suffix, sizeof(suffix), "_%lu", dir->i_ino);
> > > + total_len = prefix_len + elen + ret;
> > > + if (total_len > NAME_MAX) {
> > > + elen = -ENAMETOOLONG;
> > > + goto out;
> > > + }
> > > +
> > > + memcpy(p + elen, suffix, ret);
> > > + /* Include the leading '_' skipped by p. */
> > > + elen = total_len;
> > > + }
> > >
> > > out:
> > > kfree(cryptbuf);
> >
> > Looks good.
> >
> > Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
> >
> > Let me run xfstests for the patch to double check that everything is OK. I'll
> > share the result ASAP.
> >
>
> The xfstests run was successful. I don't see any issues with the patch.
>
> Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
>
>
Applied on testing branch of CephFS kernel client git tree.
Thanks,
Slava.
next prev parent reply other threads:[~2026-04-10 20:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-03 8:56 [PATCH] " Pengpeng Hou
2026-04-06 18:52 ` Viacheslav Dubeyko
2026-04-07 1:57 ` [PATCH v2] " Pengpeng Hou
2026-04-07 19:42 ` Viacheslav Dubeyko
2026-04-08 0:57 ` [PATCH v3] " Pengpeng Hou
2026-04-08 18:34 ` Viacheslav Dubeyko
2026-04-09 2:39 ` [PATCH v4] " Pengpeng Hou
2026-04-09 18:09 ` Viacheslav Dubeyko
2026-04-10 20:40 ` Viacheslav Dubeyko
2026-04-10 20:46 ` Viacheslav Dubeyko [this message]
2026-04-22 9:53 ` Ilya Dryomov
2026-04-23 18:04 ` Viacheslav Dubeyko
2026-04-24 9:27 ` Ilya Dryomov
2026-04-24 18:31 ` Viacheslav Dubeyko
2026-04-24 19:20 ` Ilya Dryomov
2026-04-27 8:12 ` Luis Henriques
2026-04-28 11:40 ` Ilya Dryomov
2026-04-28 18:17 ` Viacheslav Dubeyko
2026-04-24 8:15 ` Luis Henriques
2026-04-07 3:30 ` [PATCH] " Pengpeng Hou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e043aa928f13d043552ca650808c0383209f806.camel@ibm.com \
--to=slava.dubeyko@ibm.com \
--cc=amarkuze@redhat.com \
--cc=ceph-devel@vger.kernel.org \
--cc=idryomov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pengpeng@iscas.ac.cn \
--cc=slava@dubeyko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®