From: Hannes Reinecke <hare@suse.de>
To: John Garry <john.garry@huawei.com>,
jejb@linux.vnet.ibm.com, martin.petersen@oracle.com
Cc: linuxarm@huawei.com, zhangfei.gao@linaro.org,
xuwei5@hisilicon.com, john.garry2@mail.dcu.ie,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
Xiang Chen <chenxiang66@hisilicon.com>
Subject: Re: [PATCH 10/15] hisi_sas: fix HBA SAS addr endianness for v2 hw
Date: Wed, 14 Sep 2016 14:49:21 +0200 [thread overview]
Message-ID: <7e086cb7-d0f4-0099-8f90-8e55e89ada46@suse.de> (raw)
In-Reply-To: <1473176185-217808-11-git-send-email-john.garry@huawei.com>
On 09/06/2016 05:36 PM, John Garry wrote:
> The endianness for the SAS address in the TX_ID_DWORD
> registers is set incorrectly.
> We see errors like this in the boot log:
> [ 7.583284] sas: target proto 0x0 at 50000d1108e7923f:0x1f not handled
>
> This is due to the host SAS addr not matching the PHY SAS
> addr in the expander host-attached phy discovery responses.
>
> To fix, we byte swap the SAS addr from BE to LE (which is
> the endianness of the SAS controller).
>
> Signed-off-by: John Garry <john.garry@huawei.com>
> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
> ---
> drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> index ae44443..ce84211 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> @@ -562,13 +562,13 @@ static void config_id_frame_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
> __swab32(identify_buffer[0]));
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
> - identify_buffer[2]);
> + __swab32(identify_buffer[1]));
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
> - identify_buffer[1]);
> + __swab32(identify_buffer[2]));
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
> - identify_buffer[4]);
> + __swab32(identify_buffer[3]));
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
> - identify_buffer[3]);
> + __swab32(identify_buffer[4]));
> hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
> __swab32(identify_buffer[5]));
> }
>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
next prev parent reply other threads:[~2016-09-14 12:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 15:36 [PATCH 00/15] hisi_sas misc fixes and minor optimisations John Garry
2016-09-06 15:36 ` [PATCH 01/15] hisi_sas: save completion queue read pointer John Garry
2016-09-14 11:46 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 02/15] hisi_sas: save delivery queue write pointer John Garry
2016-09-14 11:47 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 03/15] hisi_sas: keep CHL_INT2 masked for v2 HW John Garry
2016-09-14 11:48 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 04/15] hisi_sas: only zero slot memory when reused John Garry
2016-09-14 12:45 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 05/15] hisi_sas: use safe BITS_PER_BYTE for slot tag size calculation John Garry
2016-09-14 12:46 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 06/15] hisi_sas: disable dlvry queues once at reset for v2 hw John Garry
2016-09-14 12:46 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 07/15] hisi_sas: fix phy8 linkrate calculation in phy_up_v2_hw() John Garry
2016-09-14 12:47 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 08/15] hisi_sas: fix a potential warning for sata disk ejection John Garry
2016-09-14 12:48 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 09/15] hisi_sas: set dma mask before allocate DMA memory John Garry
2016-09-14 12:48 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 10/15] hisi_sas: fix HBA SAS addr endianness for v2 hw John Garry
2016-09-14 12:49 ` Hannes Reinecke [this message]
2016-09-06 15:36 ` [PATCH 11/15] hisi_sas: fix HBA SAS addr endianness for v1 hw John Garry
2016-09-14 12:49 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 12/15] hisi_sas: remove init_id_frame_v2_hw() John Garry
2016-09-14 12:50 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 13/15] hisi_sas: remove init_id_frame_v1_hw() John Garry
2016-09-14 12:50 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 14/15] hisi_sas: add missing SATA pending device type to v2 hw John Garry
2016-09-14 12:51 ` Hannes Reinecke
2016-09-06 15:36 ` [PATCH 15/15] hisi_sas: send three identify before phy up John Garry
2016-09-14 12:52 ` Hannes Reinecke
2016-09-14 16:54 ` [PATCH 00/15] hisi_sas misc fixes and minor optimisations Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e086cb7-d0f4-0099-8f90-8e55e89ada46@suse.de \
--to=hare@suse.de \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=john.garry2@mail.dcu.ie \
--cc=john.garry@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=xuwei5@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®