From: <sean.wang@mediatek.com>
To: <robh+dt@kernel.org>, <matthias.bgg@gmail.com>,
<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Sean Wang <sean.wang@mediatek.com>,
Viresh Kumar <viresh.kumar@linaro.org>
Subject: [PATCH 06/12] arm64: dts: mt7622: add cpufreq related device nodes
Date: Thu, 4 Jan 2018 17:40:56 +0800 [thread overview]
Message-ID: <7e61305594b7bbcdefe31f64ca5603cbdbd9f4cf.1515057696.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1515057696.git.sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add clocks, regulators and opp information into cpu nodes.
In addition, the power supply for cpu nodes is deployed on
mt7622-rfb1 board.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 49 ++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index f72f1f5..4762168 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -20,6 +20,18 @@
bootargs = "console=ttyS0,115200n1";
};
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 5b7f0a3..90b2761 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -18,6 +18,50 @@
#address-cells = <2>;
#size-cells = <2>;
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-300000000 {
+ opp-hz = /bits/ 64 <30000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-437500000 {
+ opp-hz = /bits/ 64 <437500000>;
+ opp-microvolt = <1000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-812500000 {
+ opp-hz = /bits/ 64 <812500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-1025000000 {
+ opp-hz = /bits/ 64 <1025000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1137500000 {
+ opp-hz = /bits/ 64 <1137500000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1262500000 {
+ opp-hz = /bits/ 64 <1262500000>;
+ opp-microvolt = <1250000>;
+ };
+
+ opp-1350000000 {
+ opp-hz = /bits/ 64 <1350000000>;
+ opp-microvolt = <1310000>;
+ };
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -26,6 +70,10 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -34,6 +82,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
--
2.7.4
next prev parent reply other threads:[~2018-01-04 9:43 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 9:40 [PATCH 00/12] add dts nodes to MT7622 SoC sean.wang
2018-01-04 9:40 ` [PATCH 01/12] dt-bindings: clock: mediatek: add missing required #reset-cells sean.wang
2018-01-09 3:34 ` Rob Herring
2018-01-04 9:40 ` [PATCH 02/12] arm64: dts: mt7622: add clock controller device nodes sean.wang
2018-01-04 9:40 ` [PATCH 03/12] arm64: dts: mt7622: add power domain " sean.wang
2018-01-04 9:40 ` [PATCH 04/12] arm64: dts: mt7622: add pinctrl related " sean.wang
2018-01-04 9:40 ` [PATCH 05/12] arm64: dts: mt7622: add PMIC MT6380 related nodes sean.wang
2018-01-04 10:27 ` Philippe Ombredanne
2018-01-05 3:42 ` Sean Wang
2018-01-05 8:21 ` Philippe Ombredanne
2018-01-12 3:33 ` Sean Wang
2018-01-04 9:40 ` sean.wang [this message]
2018-01-04 9:45 ` [PATCH 06/12] arm64: dts: mt7622: add cpufreq related device nodes Viresh Kumar
2018-01-04 10:01 ` Sean Wang
2018-01-04 9:40 ` [PATCH 07/12] arm64: dts: mt7622: turn uart0 clock to real ones sean.wang
2018-01-04 9:40 ` [PATCH 08/12] arm64: dts: mt7622: add SoC and peripheral related device nodes sean.wang
2018-01-04 9:40 ` [PATCH 09/12] arm64: dts: mt7622: add flash " sean.wang
2018-01-04 9:41 ` [PATCH 10/12] arm64: dts: mt7622: add ethernet " sean.wang
2018-01-04 9:41 ` [PATCH 11/12] arm64: dts: mt7622: add PCIe " sean.wang
2018-01-04 9:41 ` [PATCH 12/12] arm64: dts: mt7622: add SATA " sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e61305594b7bbcdefe31f64ca5603cbdbd9f4cf.1515057696.git.sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®