From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CFEC3C43219 for ; Fri, 3 May 2019 09:01:21 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 87D492075C for ; Fri, 3 May 2019 09:01:21 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="QctHJ7Yx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726865AbfECJBU (ORCPT ); Fri, 3 May 2019 05:01:20 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:11260 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1725885AbfECJBU (ORCPT ); Fri, 3 May 2019 05:01:20 -0400 Received: from pps.filterd (m0046660.ppops.net [127.0.0.1]) by mx08-00178001.pphosted.com (8.16.0.27/8.16.0.27) with SMTP id x438s4Bo024751; Fri, 3 May 2019 11:01:07 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=subject : to : cc : references : from : message-id : date : mime-version : in-reply-to : content-type : content-transfer-encoding; s=STMicroelectronics; bh=NJcBfDIXc6aq0TUQaHd3aj5WEWDAnTUBKckNqR/0Asc=; b=QctHJ7Yxj6KjskcUX1gU22VDKHjRXWpUI2QH8biFHaUN1tdXm0NCeKEv2iRTuisjgzzE JPy6ShpzSN2I/DSwqVfaj1QH7A3TOv0UijRJe5ykENgc7GZheX/ZmUJ7aP7jBtSu4eMm p8xT98pwukB9PtxINZbYYBjHMbNtGWpH5LP6Tk7aUbuIcCtyNQdgQjkjJsMujT/awbd6 QJQImbii0ktPw9IANXiKUM8Iq6vZI7ZDFHui4LDax1mGzYR1zbMKze8aqx4eR70VLO+C RwlsNfmcrMfwnKKRa3dzQAKN+CY8YLVKWM4p0gI0OqJAp4uoGZQY3aUhhkgANDJ+rsP0 VA== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx08-00178001.pphosted.com with ESMTP id 2s6xhbnas9-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Fri, 03 May 2019 11:01:03 +0200 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6AAD638; Fri, 3 May 2019 09:01:02 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 1C721159E; Fri, 3 May 2019 09:01:02 +0000 (GMT) Received: from [10.48.0.204] (10.75.127.49) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Fri, 3 May 2019 11:01:01 +0200 Subject: Re: [PATCH 3/3] ARM: dts: Add Avenger96 devicetree support based on STM32MP157A To: Manivannan Sadhasivam , , CC: , , , , References: <20190503053123.6828-1-manivannan.sadhasivam@linaro.org> <20190503053123.6828-4-manivannan.sadhasivam@linaro.org> From: Alexandre Torgue Message-ID: <7e693155-d1d4-b12d-74fd-0236d9d52257@st.com> Date: Fri, 3 May 2019 11:01:00 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.6.1 MIME-Version: 1.0 In-Reply-To: <20190503053123.6828-4-manivannan.sadhasivam@linaro.org> Content-Type: text/plain; charset="utf-8"; format=flowed Content-Language: en-US Content-Transfer-Encoding: 8bit X-Originating-IP: [10.75.127.49] X-ClientProxiedBy: SFHDAG2NODE3.st.com (10.75.127.6) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2019-05-03_03:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Mani On 5/3/19 7:31 AM, Manivannan Sadhasivam wrote: > Add devicetree support for Avenger96 board based on STM32MP157A MPU > from ST Micro. This board is one of the 96Boards Consumer Edition board > from Arrow Electronics and has the following features: > > SoC: STM32MP157AAC > PMIC: STPMIC1A > RAM: 1024 Mbyte @ 533MHz > Storage: eMMC v4.51: 8 Gbyte > microSD Socket: UHS-1 v3.01 > Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant > Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac > Bluetooth®v4.2 (BR/EDR/BLE) > USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG > Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4 > LED: 4x User LED, 1x WiFi LED, 1x BT LED > > More information about this board can be found in 96Boards website: > https://www.96boards.org/product/avenger96/ > > Signed-off-by: Manivannan Sadhasivam > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/stm32mp157a-avenger96.dts | 320 ++++++++++++++++++++ > 2 files changed, 321 insertions(+) > create mode 100644 arch/arm/boot/dts/stm32mp157a-avenger96.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 8a1d0b3f55dd..f1d2f0bfa7c2 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -965,6 +965,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ > stm32h743i-eval.dtb \ > stm32h743i-disco.dtb \ > stm32mp157a-dk1.dtb \ > + stm32mp157a-avenger96.dtb \ follow alphabetic order please. > stm32mp157c-dk2.dtb \ > stm32mp157c-ed1.dtb \ > stm32mp157c-ev1.dtb > diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts > new file mode 100644 > index 000000000000..a3b8af82ac70 > --- /dev/null > +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts > @@ -0,0 +1,320 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) > +/* > + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved > + * Author: Manivannan Sadhasivam > + */ > + > +/dts-v1/; > + > +#include "stm32mp157c.dtsi" > +#include "stm32mp157-pinctrl.dtsi" > +#include > +#include > + > +/ { > + model = "Arrow Electronics STM32MP157A Avenger96 board"; > + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; > + > + aliases { > + ethernet0 = ðernet0; > + mmc0 = &sdmmc1; > + serial0 = &uart4; > + serial1 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@c0000000 { > + reg = <0xc0000000 0x40000000>; you could add device_type = "memory"; > + }; > + > + led { > + compatible = "gpio-leds"; > + led1 { > + label = "green:user1"; > + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + led2 { > + label = "green:user2"; > + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + > + led3 { > + label = "green:user3"; > + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc1"; > + default-state = "off"; > + }; > + > + led4 { > + label = "green:user3"; > + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "none"; > + default-state = "off"; > + panic-indicator; > + }; > + > + led5 { > + label = "yellow:wifi"; > + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + > + led6 { > + label = "blue:bt"; > + gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "bluetooth-power"; > + default-state = "off"; > + }; > + }; > +}; > + > +ðernet0 { > + status = "okay"; > + pinctrl-0 = <ðernet0_rgmii_pins_a>; > + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; > + pinctrl-names = "default", "sleep"; > + phy-mode = "rgmii"; > + max-speed = <1000>; > + phy-handle = <&phy0>; > + > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy0: ethernet-phy@7 { > + reg = <7>; > + }; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_b>; > + i2c-scl-rising-time-ns = <185>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + /delete-property/dmas; > + /delete-property/dma-names; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins_b>; > + i2c-scl-rising-time-ns = <185>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + /delete-property/dmas; > + /delete-property/dma-names; > +}; > + > +&i2c4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_pins_a>; > + i2c-scl-rising-time-ns = <185>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + /delete-property/dmas; > + /delete-property/dma-names; > + > + pmic: stpmic@33 { > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + status = "okay"; > + > + st,main-control-register = <0x04>; > + st,vin-control-register = <0xc0>; > + st,usb-control-register = <0x30>; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + > + ldo1-supply = <&v3v3>; > + ldo2-supply = <&v3v3>; > + ldo3-supply = <&vdd_ddr>; > + ldo5-supply = <&v3v3>; > + ldo6-supply = <&v3v3>; > + pwr_sw1-supply = <&bst_out>; > + pwr_sw2-supply = <&bst_out>; > + > + vddcore: buck1 { > + regulator-name = "vddcore"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd_ddr: buck2 { > + regulator-name = "vdd_ddr"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd: buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + st,mask_reset; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + v3v3: buck4 { > + regulator-name = "v3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-over-current-protection; > + regulator-initial-mode = <0>; > + }; > + > + vdda: ldo1 { > + regulator-name = "vdda"; > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + interrupts = ; > + interrupt-parent = <&pmic>; > + }; > + > + v2v8: ldo2 { > + regulator-name = "v2v8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + interrupts = ; > + interrupt-parent = <&pmic>; > + }; > + > + vtt_ddr: ldo3 { > + regulator-name = "vtt_ddr"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <750000>; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + vdd_usb: ldo4 { > + regulator-name = "vdd_usb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + interrupts = ; > + interrupt-parent = <&pmic>; > + }; > + > + vdd_sd: ldo5 { > + regulator-name = "vdd_sd"; > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + interrupts = ; > + interrupt-parent = <&pmic>; > + regulator-boot-on; > + }; > + > + v1v8: ldo6 { > + regulator-name = "v1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + interrupts = ; > + interrupt-parent = <&pmic>; > + regulator-enable-ramp-delay = <300000>; > + }; > + > + vref_ddr: vref_ddr { > + regulator-name = "vref_ddr"; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + bst_out: boost { > + regulator-name = "bst_out"; > + interrupts = ; > + interrupt-parent = <&pmic>; > + }; > + > + vbus_otg: pwr_sw1 { > + regulator-name = "vbus_otg"; > + interrupts = ; > + interrupt-parent = <&pmic>; > + regulator-active-discharge; > + }; > + > + vbus_sw: pwr_sw2 { > + regulator-name = "vbus_sw"; > + interrupts = ; > + interrupt-parent = <&pmic>; > + regulator-active-discharge; > + }; > + }; > + > + onkey { > + compatible = "st,stpmic1-onkey"; > + interrupts = , ; > + interrupt-names = "onkey-falling", "onkey-rising"; > + status = "okay"; > + }; > + > + watchdog { > + compatible = "st,stpmic1-wdt"; > + status = "disabled"; > + }; > + }; > +}; > + > +&iwdg2 { > + timeout-sec = <32>; > + status = "okay"; > +}; > + > +&rng1 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&sdmmc1 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; > + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; > + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; > + broken-cd; > + st,sig-dir; > + st,neg-edge; > + st,use-ckin; > + bus-width = <4>; > + vmmc-supply = <&vdd_sd>; > + status = "okay"; > +}; > + > +&uart4 { > + /* On Low speed expansion header */ > + label = "LS-UART1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart4_pins_b>; > + status = "okay"; > +}; > + > +&uart7 { > + /* On Low speed expansion header */ > + label = "LS-UART0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart7_pins_a>; > + status = "okay"; > +}; >