mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	tglx@linutronix.de, jason@lakedaemon.net,
	Rob Herring <robh+dt@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Device Tree Mailing List <devicetree@vger.kernel.org>,
	Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
	linux-kernel@vger.kernel.org, Sekhar Nori <nsekhar@ti.com>
Subject: Re: [PATCH 1/2] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
Date: Mon, 8 Oct 2018 14:55:20 +0100	[thread overview]
Message-ID: <7e7e7778-c67d-5fc1-6b4a-52a7089a9691@arm.com> (raw)
In-Reply-To: <8a05f735-01bd-5c2d-fcfa-dcc00adffd0b@ti.com>

On 08/10/18 10:46, Lokesh Vutla wrote:
> Hi Marc,
> 
> On Saturday 06 October 2018 03:32 PM, Marc Zyngier wrote:
>> On Sat, 06 Oct 2018 08:28:11 +0100,
>> Lokesh Vutla <lokeshvutla@ti.com> wrote:
>>>
>>> Add the DT binding documentation for Interrupt router driver.
>>>
>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>>> ---
>>>    .../interrupt-controller/ti,sci-intr.txt      | 83 +++++++++++++++++++
>>>    MAINTAINERS                                   |  1 +
>>>    2 files changed, 84 insertions(+)
>>>    create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
>>> new file mode 100644
>>> index 000000000000..681ca53cc5fb
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
>>> @@ -0,0 +1,83 @@
>>> +Texas Instruments K3 Interrupt Router
>>> +=====================================
>>> +
>>> +The Interrupt Router (INTR) module provides a mechanism to mux M
>>> +interrupt inputs to N interrupt outputs, where all M inputs are selectable
>>> +to be driven per N output. There is one register per output (MUXCNTL_N) that
>>> +controls the selection.
>>> +
>>> +
>>> +                                 Interrupt Router
>>> +                             +----------------------+
>>> +                             |  Inputs     Outputs  |
>>> +        +-------+            | +------+             |
>>> +        | GPIO  |----------->| | irq0 |             |       Host IRQ
>>> +        +-------+            | +------+             |      controller
>>> +                             |    .        +-----+  |      +-------+
>>> +        +-------+            |    .        |  0  |  |----->|  GIC  |
>>> +        | INTA  |----------->|    .        +-----+  |      +-------+
>>> +        +-------+            |    .          .      |
>>> +                             | +------+      .      |
>>> +                             | | irqM |    +-----+  |
>>> +                             | +------+    |  N  |  |
>>> +                             |             +-----+  |
>>> +                             +----------------------+
>>> +
>>> +Configuration of these MUXCNTL_N registers is done by a system controller
>>> +(like the Device Memory and Security Controller on K3 AM654 SoC). System
>>> +controller will keep track of the used and unused registers within the Router.
>>> +Driver should request the system controller to get the range of GIC IRQs
>>> +assigned to the requesting hosts. It is the drivers responsibility to keep
>>> +track of GIC IRQs.
>>
>> I would drop the GIC here, and replace it by "parent interrupt
>> controller", as nothing here is GIC specific
>>
>>> +
>>> +Communication between the host processor running an OS and the system
>>> +controller happens through a protocol called TI System Control Interface
>>> +(TISCI protocol). For more details refer:
>>> +Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>> +
>>> +TISCI Interrupt Router Node:
>>> +----------------------------
>>> +- compatible:		Must be "ti,sci-intr".
>>> +- interrupt-controller:	Identifies the node as an interrupt controller
>>> +- #interrupt-cells:	Specifies the number of cells needed to encode an
>>> +			interrupt source. The value should be 3.
>>> +			First cell should contain the TISCI device ID of source
>>> +			Second cell should contain the interrupt source offset
>>> +			within the device
>>> +			Third cell specifies the trigger type as defined
>>> +			in interrupts.txt in this directory.
>>
>> Are all trigger types supported?
> 
> Nope, only level interrupts are supported. Will fix it in v2.
> 
>>
>>> +- interrupt-parent:	phandle of irq parent for TISCI intr. The parent must
>>> +			use the same interrupt-cells format as GIC.
>>
>> Why that constraint? From what I can see, the two are fairly
>> independent, and the constraint looks more of a Linux driver issue
>> than a DT constraint.
> 
> Driver when calling irq_domain_alloc_irqs_parent(), the fwspec node that gets
> passed assumes that parent is gic. parameters are filled in with such
> assumption. Do you suggest anything to make it more generic?

As I said, that's a Linux driver issue, not a DT specification at all. 
It is not worth it trying to generalize it in the driver implementation, 
but the DT spec it self should be generic enough.

> 
>>
>>> +- ti,sci:		Phandle to TI-SCI compatible System controller node.
>>> +- ti,sci-dst-id:	TISCI device ID of the destination IRQ controller.
>>> +- ti,sci-rm-range-girq:	Tuple corresponding to unique TISCI resource type that
>>> +			defines the dst host irq ranges assigned to this
>>> +			interrupt router from this host context.
>>> +			Tuple should be of format <type subtype>.
>>> +
> 
> Thanks a lot for the review. Also, I need a suggestion regarding one more
> interrupt controller(Interrupt Aggregator) on the same SoC controlled by
> TISCI_PROTOCOL.
> 
> The Interrupt Aggregator (INTA) provides a centralized machine
> which handles the termination of system events to that they can
> be coherently processed by the host(s) in the system. Integration looks
> something similar https://pastebin.ubuntu.com/p/T32vbrwsch/ .
> 
> Configuration of the Intmap registers that maps global events to vint is done
> by a system controller (like the Device Memory and Security Controller on K3
> AM654 SoC). Driver should request the system controller to get the range
> of global events and vints assigned to the requesting host. Management
> of these requested resources should be handled by driver and requests
> system controller to map specific global event to vint, bit pair.

I'm sorry, but I really have no idea what the global events and the 
vints are. Maybe you should describe what this is all about, and maybe 
provide a pointer to some documentation...

> 
> There can be cases such that IRQ routes can involve both INTR and INTA like below:
> 	IP ---> INTA ---> INTR ----> GIC.
> 
> In these cases TISCI involves only one message with parametes(source id, source
> offset, inta_id, dst id) for configuring IRQ route till the destination. Co
> processor will detect there is INTR in the IRQ path and configure that as well.
> 
> Right now I kind of differentiated this scenario in INTA driver by passing a
> flag(TI_SCI_EVENT) to INTR driver. If such flag comes, INTR driver should avoid
> calling ti_sci api for configuring. Do you think this is the right direction or
> do you suggest a better solution.

Frankly, it mostly indicates that the firmware does too much, and should 
be more flexible.

> If I am not clear in the above description, I can post an RFC for INTA driver
> for continuing this discussion.

That'd be preferable, IMO. Please provide definitions for all the above 
jargon, as well as pointers to publicly available documentation, if any.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2018-10-08 13:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-06  7:28 [PATCH 0/2] irqchip: ti-sci-intr: Add support for K3 Interrupt Router Lokesh Vutla
2018-10-06  7:28 ` [PATCH 1/2] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings Lokesh Vutla
2018-10-06 10:02   ` Marc Zyngier
2018-10-08  9:46     ` Lokesh Vutla
2018-10-08 13:55       ` Marc Zyngier [this message]
2018-10-08 15:28         ` Lokesh Vutla
2018-10-06 16:29   ` Nishanth Menon
2018-10-15 11:05     ` Lokesh Vutla
2018-10-17 13:49     ` Rob Herring
2018-10-06  7:28 ` [PATCH 2/2] irqchip: ti-sci-intr: Add support for Interrupt Router driver Lokesh Vutla
2018-10-06  9:55   ` Marc Zyngier
2018-10-08  9:48     ` Lokesh Vutla
2018-10-08 13:00       ` Marc Zyngier
2018-10-08 15:20         ` Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7e7e7778-c67d-5fc1-6b4a-52a7089a9691@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®