Re: [PATCH net-next v3 1/2] net: dsa: untag the bridge pvid from rx skbs

[Florian Fainelli <f.fainelli@gmail.com>]

On 9/23/20 2:48 PM, Vladimir Oltean wrote:
> On Wed, Sep 23, 2020 at 02:40:37PM -0700, Florian Fainelli wrote:
>> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>> +	/* The sad part about attempting to untag from DSA is that we
>> +	 * don't know, unless we check, if the skb will end up in
>> +	 * the bridge's data path - br_allowed_ingress() - or not.
>> +	 * For example, there might be an 8021q upper for the
>> +	 * default_pvid of the bridge, which will steal VLAN-tagged traffic
>> +	 * from the bridge's data path. This is a configuration that DSA
>> +	 * supports because vlan_filtering is 0. In that case, we should
>> +	 * definitely keep the tag, to make sure it keeps working.
>> +	 */
>> +	netdev_for_each_upper_dev_rcu(dev, upper_dev, iter) {
>> +		if (!is_vlan_dev(upper_dev))
>> +			continue;
>> +
>> +		if (vid == vlan_dev_vlan_id(upper_dev))
>> +			return skb;
>> +	}
> 
> Argh...
> So I wanted to ask you how's performance with a few 8021q uppers, then I
> remembered that vlan_do_receive() probably does something more efficient
> here than a complete lookup, like hashing or something, then I found the
> vlan_find_dev() helper function.... Sorry for not noticing it in the
> first place.

Given the platforms I am using this is not even noticeable, but I did
not test with more than 10 uppers being added to the switch port.

Speaking of that part of the code, I was also wondering whether you
wanted this to be netdev_for_each_upper_dev_rcu(br, upper_dev, iter) and
catch a bridge device upper as opposed to a switch port upper? Either
way is fine and there are possibly use cases for either.
-- 
Florian