From: Kevin Hilman <khilman@baylibre.com>
To: Abel Vesa <abel.vesa@oss.qualcomm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
linux-pm@vger.kernel.org, Ulf Hansson <ulfh@kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 3/4] pmdomain: core: add genpd_for_each_child() helper
Date: Wed, 26 Aug 2026 14:59:02 -0700 [thread overview]
Message-ID: <7h33w08rx5.fsf@baylibre.com> (raw)
In-Reply-To: <ii3gxwilznalii332hlaztbevzyegoeqfq4nugpuzs6gqyq3ms@rv4x3qdlj6i7>
Abel Vesa <abel.vesa@oss.qualcomm.com> writes:
> On 26-08-19 10:08:38, Kevin Hilman (TI) wrote:
>> Add a new internal helper function genpd_for_each_child() that recursively
>> iterates over all devices in a PM domain and its child domains (subdomains).
>> This helper is useful for governors and other core PM domain code that needs
>> to examine or apply operations to all devices within a domain hierarchy.
>>
>> The function takes a callback that is invoked for each device, and supports
>> early termination if the callback returns a non-zero value.
>>
>> The helper is defined in a new internal header drivers/pmdomain/core.h and
>> implemented in drivers/pmdomain/core.c, making it available to other PM
>> domain subsystem components.
>>
>> The first user of this helper is the cpu_system_power_down_ok() governor
>> function, which uses it to check device QoS latency constraints across the
>> entire domain hierarchy.
>>
>> Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
>> ---
>> drivers/pmdomain/core.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
>> drivers/pmdomain/core.h | 17 +++++++++++++++++
>> 2 files changed, 62 insertions(+)
>>
>> diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c
>> index 842c4169e290..ff27369d9a97 100644
>> --- a/drivers/pmdomain/core.c
>> +++ b/drivers/pmdomain/core.c
>> @@ -24,6 +24,8 @@
>> #include <linux/cpu.h>
>> #include <linux/debugfs.h>
>>
>> +#include "core.h"
>> +
>> /* Provides a unique ID for each genpd device */
>> static DEFINE_IDA(genpd_ida);
>>
>> @@ -276,6 +278,49 @@ static void genpd_sd_counter_inc(struct generic_pm_domain *genpd)
>> smp_mb__after_atomic();
>> }
>>
>> +/**
>> + * genpd_for_each_child - Recursively iterate over all devices
>> + * in a PM domain and its subdomains.
>> + * @genpd: PM domain to iterate over.
>> + * @fn: Callback function to invoke for each device.
>> + * @data: Data to pass to the callback function.
>> + *
>> + * This function recursively walks through all devices in the given PM domain
>> + * and all devices in its child PM domains (subdomains). For each device found,
>> + * the callback function @fn is invoked with the device and @data as arguments.
>> + *
>> + * Note: this function is inteded for use by the core and governors,
>> + * not for pmdomain providers.
>> + *
>> + * Returns: 0 on success, or the first non-zero value returned by @fn.
>> + */
>> +int genpd_for_each_child(struct generic_pm_domain *genpd,
>> + int (*fn)(struct device *dev, void *data),
>> + void *data)
>> +{
>> + struct pm_domain_data *pdd;
>> + struct gpd_link *link;
>> + int ret;
>> +
>> + /* First, iterate over all devices in this domain */
>> + list_for_each_entry(pdd, &genpd->dev_list, list_node) {
>> + ret = fn(pdd->dev, data);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + /* Then, recursively iterate over all child domains (subdomains) */
>> + list_for_each_entry(link, &genpd->parent_links, parent_node) {
>> + struct generic_pm_domain *child_pd = link->child;
>> +
>> + ret = genpd_for_each_child(child_pd, fn, data);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>
> This is usefull, I like it.
Thanks for the review & feedback.
>> +
>> #ifdef CONFIG_DEBUG_FS
>> static struct dentry *genpd_debugfs_dir;
>>
>> diff --git a/drivers/pmdomain/core.h b/drivers/pmdomain/core.h
>> new file mode 100644
>> index 000000000000..7061891d31fb
>> --- /dev/null
>> +++ b/drivers/pmdomain/core.h
>> @@ -0,0 +1,17 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Internal header for PM domain core
>> + *
>> + * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
>> + */
>
> Year and author are wrong.
Oops, copy/paste.
> With this addressed:
>
> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Thanks,
Kevin
next prev parent reply other threads:[~2026-08-26 21:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 17:08 [PATCH v4 0/4] PM: QoS/pmdomains: support resume latencies for system-wide PM Kevin Hilman (TI)
2026-08-19 17:08 ` [PATCH v4 1/4] PM / QoS: add flag to indicate latency applies system-wide Kevin Hilman (TI)
2026-08-25 16:17 ` Kendall Willis
2026-08-19 17:08 ` [PATCH v4 2/4] PM / QoS: add lockless read for flags Kevin Hilman (TI)
2026-08-25 16:19 ` Kendall Willis
2026-08-19 17:08 ` [PATCH v4 3/4] pmdomain: core: add genpd_for_each_child() helper Kevin Hilman (TI)
2026-08-19 17:22 ` Abel Vesa
2026-08-26 21:59 ` Kevin Hilman [this message]
2026-08-19 17:08 ` [PATCH v4 4/4] pmdomain: add support system-wide resume latency constraints Kevin Hilman (TI)
2026-08-19 17:28 ` Abel Vesa
2026-08-25 16:19 ` Kendall Willis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h33w08rx5.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®