Re: [PATCH 5/5] usb: musb: omap2430: clean up probe error handling

[Kevin Hilman <khilman@baylibre.com>]

Johan Hovold <johan@kernel.org> writes:

> Using numbered error labels is discouraged (e.g. as it requires
> renumbering them when adding a new intermediate error path).
>
> Rename the error labels after what they do.
>
> While at it, drop the redundant platform allocation failure dev_err()
> as the error would already have been logged by the allocator.
>
> Signed-off-by: Johan Hovold <johan@kernel.org>

Reviewed-by: Kevin Hilman <khilman@baylibre.com>

> ---
>  drivers/usb/musb/omap2430.c | 23 ++++++++++-------------
>  1 file changed, 10 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index 36f756f9b7f6..c35c07b7488c 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -318,13 +318,11 @@ static int omap2430_probe(struct platform_device *pdev)
>  
>  	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
>  	if (!glue)
> -		goto err0;
> +		return -ENOMEM;
>  
>  	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
> -	if (!musb) {
> -		dev_err(&pdev->dev, "failed to allocate musb device\n");
> -		goto err0;
> -	}
> +	if (!musb)
> +		return -ENOMEM;
>  
>  	musb->dev.parent		= &pdev->dev;
>  	musb->dev.dma_mask		= &omap2430_dmamask;
> @@ -349,15 +347,15 @@ static int omap2430_probe(struct platform_device *pdev)
>  
>  	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
>  	if (!pdata)
> -		goto err2;
> +		goto err_put_musb;
>  
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data)
> -		goto err2;
> +		goto err_put_musb;
>  
>  	config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
>  	if (!config)
> -		goto err2;
> +		goto err_put_musb;
>  
>  	of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
>  	of_property_read_u32(np, "interface-type",
> @@ -380,7 +378,7 @@ static int omap2430_probe(struct platform_device *pdev)
>  		if (!control_pdev) {
>  			dev_err(&pdev->dev, "Failed to get control device\n");
>  			ret = -EINVAL;
> -			goto err2;
> +			goto err_put_musb;
>  		}
>  		glue->control_otghs = &control_pdev->dev;
>  	}
> @@ -456,20 +454,19 @@ static int omap2430_probe(struct platform_device *pdev)
>  	ret = platform_device_add(musb);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to register musb device\n");
> -		goto err3;
> +		goto err_disable_rpm;
>  	}
>  
>  	return 0;
>  
> -err3:
> +err_disable_rpm:
>  	pm_runtime_disable(glue->dev);
>  err_put_control_otghs:
>  	if (!IS_ERR(glue->control_otghs))
>  		put_device(glue->control_otghs);
> -err2:
> +err_put_musb:
>  	platform_device_put(musb);
>  
> -err0:
>  	return ret;
>  }
>  
> -- 
> 2.49.1