Re: [PATCH 2/3] dt-bindings: devfreq: add compatible for mt8183 cci devfreq

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Andrew-sh.Cheng,

On 19. 1. 29. 오후 3:35, Andrew-sh Cheng wrote:
> From: "Andrew-sh.Cheng" <andrew-sh.cheng@mediatek.com>
> 
> This adds dt-binding documentation of cci devfreq
> for Mediatek MT8183 SoC platform.
> 
> Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
> ---
>  .../bindings/devfreq/mt8183-cci-devfreq.txt           | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/devfreq/mt8183-cci-devfreq.txt
> 
> diff --git a/Documentation/devicetree/bindings/devfreq/mt8183-cci-devfreq.txt b/Documentation/devicetree/bindings/devfreq/mt8183-cci-devfreq.txt
> new file mode 100644
> index 0000000..e2b61cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/mt8183-cci-devfreq.txt
> @@ -0,0 +1,19 @@
> +* Mediatek CCI frequency device

You have to add more detailed what to do on this driver.
Also, please add the full alphabet for CCI.

> +
> +Required properties:
> +- compatible: should contain "mediatek,mt8183-cci" for cci devfreq

Usually, dt-binding document only specifies h/w information
and how to bind device. 'devfreq' is the word of linux-side.
It means that 'devfreq' cannot indicate the any h/w device.

You should use the h/w device information and word of CCI for writing
the dt-binding document without linux-side word like devfreq.

For example, 
- cci devfreq -> frequency scaling of CCI

> +

Remove unneeded blank line.

> +- clocks: for cci devfreq

ditto of 'devfreq' word.

> +

ditto of blank line

> +- clock-names: for cci devfreq driver to reference

ditto of 'devfreq' word.

> +

ditto of blank line

> +- operating-points-v2: for cci devfreq opp table

ditto of 'devfreq' word.

> +
> +Example:
> +	cci: cci {
> +		compatible = "mediatek,cci";
> +		clocks = <&apmixedsys CLK_APMIXED_CCIPLL>;
> +		clock-names = "cci_clock";
> +		operating-points-v2 = <&cci_opp>;
> +	};
> +
> 

This document is missing the 'regulator' property. Please add it

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics