mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>, <linux-arm-msm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
	<quic_khsieh@quicinc.com>,
	Marijn Suijten <marijn.suijten@somainline.org>,
	<quic_jesszhan@quicinc.com>, <freedreno@lists.freedesktop.org>
Subject: Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
Date: Mon, 5 Jun 2023 19:35:49 -0700	[thread overview]
Message-ID: <804363cf-f6cf-71a6-be8f-5fc00eea3154@quicinc.com> (raw)
In-Reply-To: <48cc3d26-10fe-5b10-30b6-0772d62a2a53@linaro.org>



On 6/5/2023 6:03 PM, Dmitry Baryshkov wrote:
> On 06/06/2023 03:55, Abhinav Kumar wrote:
>>
>>
>> On 6/3/2023 7:21 PM, Dmitry Baryshkov wrote:
>>> On 31/05/2023 21:25, Abhinav Kumar wrote:
>>>>
>>>>
>>>> On 5/31/2023 3:07 AM, Dmitry Baryshkov wrote:
>>>>> On 31/05/2023 06:05, Abhinav Kumar wrote:
>>>>>>
>>>>>>
>>>>>> On 5/30/2023 7:53 PM, Dmitry Baryshkov wrote:
>>>>>>> On Wed, 31 May 2023 at 03:54, Abhinav Kumar 
>>>>>>> <quic_abhinavk@quicinc.com> wrote:
>>>>>>>>
>>>>>>>> With [1] dpu core revision was dropped in favor of using the
>>>>>>>> compatible string from the device tree to select the dpu catalog
>>>>>>>> being used in the device.
>>>>>>>>
>>>>>>>> This approach works well however also necessitates adding catalog
>>>>>>>> entries for small register level details as dpu capabilities and/or
>>>>>>>> features bloating the catalog unnecessarily. Examples include but
>>>>>>>> are not limited to data_compress, interrupt register set, 
>>>>>>>> widebus etc.
>>>>>>>>
>>>>>>>> Introduce the dpu core revision back as an entry to the catalog 
>>>>>>>> so that
>>>>>>>> we can just use dpu revision checks and enable those bits which
>>>>>>>> should be enabled unconditionally and not controlled by a catalog
>>>>>>>> and also simplify the changes to do something like:
>>>>>>>>
>>>>>>>> if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx)
>>>>>>>>          enable the bit;
>>>>>>>>
>>>>>>>> Also, add some of the useful macros back to be able to use dpu core
>>>>>>>> revision effectively.
>>>>>>>>
>>>>>>>> [1]: 
>>>>>>>> https://patchwork.freedesktop.org/patch/530891/?series=113910&rev=4
>>>>>>>>
>>>>>>>> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>>>>>>>> ---
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_3_0_msm8998.h   |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_4_0_sdm845.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_5_0_sm8150.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h   |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_6_0_sm8250.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_6_2_sc7180.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_6_3_sm6115.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_6_5_qcm2290.h   |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_7_0_sm8350.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h  |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_8_1_sm8450.h    |  1 +
>>>>>>>>   .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h    |  1 +
>>>>>>>>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    | 31 
>>>>>>>> ++++++++++++++++++-
>>>>>>>>   14 files changed, 43 insertions(+), 1 deletion(-)
>>>>>>>>
>>>>>>>
>>>>>>> [skipped catalog changes]
>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h 
>>>>>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>>>>>>> index 677048cc3b7d..cc4aa75a1219 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>>>>>>> @@ -19,6 +19,33 @@
>>>>>>>>    */
>>>>>>>>   #define MAX_BLOCKS    12
>>>>>>>>
>>>>>>>> +#define DPU_HW_VER(MAJOR, MINOR, STEP)\
>>>>>>>> +                 ((((unsigned int)MAJOR & 0xF) << 28) |\
>>>>>>>> +                 ((MINOR & 0xFFF) << 16) |\
>>>>>>>> +                 (STEP & 0xFFFF))
>>>>>>>> +
>>>>>>>> +#define DPU_HW_MAJOR(rev)((rev) >> 28)
>>>>>>>> +#define DPU_HW_MINOR(rev)(((rev) >> 16) & 0xFFF)
>>>>>>>> +#define DPU_HW_STEP(rev)((rev) & 0xFFFF)
>>>>>>>> +#define DPU_HW_MAJOR_MINOR(rev)((rev) >> 16)
>>>>>>>> +
>>>>>>>> +#define IS_DPU_MAJOR_MINOR_SAME(rev1, rev2)   \
>>>>>>>> +(DPU_HW_MAJOR_MINOR((rev1)) == DPU_HW_MAJOR_MINOR((rev2)))
>>>>>>>> +
>>>>>>>> +#define DPU_HW_VER_300 DPU_HW_VER(3, 0, 0) /* 8998 v1.0 */
>>>>>>>> +#define DPU_HW_VER_400 DPU_HW_VER(4, 0, 0) /* sdm845 v1.0 */
>>>>>>>> +#define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
>>>>>>>> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
>>>>>>>> +#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
>>>>>>>> +#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>>>>>>>> +#define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
>>>>>>>> +#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
>>>>>>>> +#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
>>>>>>>> +#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
>>>>>>>> +#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
>>>>>>>> +#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
>>>>>>>> +#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */
>>>>>>>
>>>>>>> Instead of having defines for all SoCs (which can quickly become
>>>>>>> unmanageable) and can cause merge conflicts, I'd suggest inlining 
>>>>>>> all
>>>>>>> the defines into respective catalog files.
>>>>>>>
>>>>>>
>>>>>> Sure, that can be done.
>>>>>>
>>>>>>> Also, I'm not sure that the "step" should be a part of the 
>>>>>>> catalog. I
>>>>>>> know that this follows the hardware revision. However, please 
>>>>>>> correct
>>>>>>> me if I'm wrong, different step levels are used for revisions of the
>>>>>>> same SoC. The original code that was reading the hw revision from 
>>>>>>> the
>>>>>>> hardware register, listed both 5.0.0 and 5.0.1 for sm8150.
>>>>>>>
>>>>>>
>>>>>> This is one of the things i noticed while making this change.
>>>>>>
>>>>>> Before the catalog rework, we used to handle even steps as we used 
>>>>>> to read that from the register and match it with the mdss_cfg 
>>>>>> handler. But after the rework, we dont handle steps anymore. Yes, 
>>>>>> you are right that different step levels are used for the 
>>>>>> revisions of the same SOC and so with that, i dont expect or 
>>>>>> atleast am not aware of DPU differences between steps but I am not 
>>>>>> able to rule it out.
>>>>>>
>>>>>> So are you suggesting we drop step altogether and DPU_HW_VER() 
>>>>>> macro shall only handle major and minor versions? With the current 
>>>>>> chipsets I see, it should not make a difference . Its just that I 
>>>>>> am not sure if that will never happen.
>>>>>
>>>>> Yes. The goal of this rework would be to drop generic features and 
>>>>> to replace those checks with DPU-revision lookups. Correct?
>>>>
>>>> Yes thats right.
>>>>
>>>>> I think that from this perspective having to handle toe step 
>>>>> revision is a sign of an overkill. Having to handle the step 
>>>>> revision is a sign of paltform feature (or mis-feature) rather than 
>>>>> a generic DPU bit.
>>>>>
>>>>
>>>> Not entirely. Lets not forget that at the moment even dpu_perf_cfg 
>>>> is part of the catalog. Even if in terms of major HW blocks steps 
>>>> shouldnt change, there is absolutely no guarantee that perf data 
>>>> cannot.
>>>>
>>>> This is what is the sticking point for me which is holding me back 
>>>> against dropping step. Thoughts?
>>>
>>> We usually do not support ES versions of the chips, only the final 
>>> version. So supporting the perf data for earlier revisions is also 
>>> not required.
>>>
>>
>> ack, we will drop step in that case. and good to know about the ES 
>> versions.
>>
>>>>
>>>>> In fact I suppose that even handling a minor revision would be an 
>>>>> overkill. Why don't we start with .dpu_major instead of .core_rev? 
>>>>> We can add .dpu_minor if/when required.
>>>>>
>>>>
>>>> No, unfortunately we cannot drop minor version for sure. I am seeing 
>>>> examples in downstream code where some of the features are available 
>>>> after a minor verion as well.
>>>
>>> Can you please give an example?
>>>
>>
>> Yes, watchdog timer, intf reset counter are available only after DPU 
>> HW version 8.1 (not major version 8).
> 
> Hmm, IIRC, wd timer was available for ages. Was it moved together with 
> the introduction of MDSS_PERIPH_0_REMOVED?
> 

I am not sure of the timeline but its certainly tied to 8.1.

> But anyway, I see your point. Let's have major and minor. I'd probably 
> still ask for the separate major and minor fields, if you don't mind.
> 

hmmm so something like this?

+#define DPU_HW_VER_300 DPU_HW_VER(3, 0) /* 8998 v1.0 */

const struct dpu_mdss_cfg dpu_msm8998_cfg = {
.......
.dpu_major_rev = DPU_HW_MAJOR(DPU_HW_VER_300),
.dpu_minor_rev = DPU_HW_MINOR(DPU_HW_VER_300)
.......
}

But may I ask why? Since the manor/minor version macros handle this 
nicely for us.

  reply	other threads:[~2023-06-06  2:36 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-31  0:53 Abhinav Kumar
2023-05-31  2:16 ` Bjorn Andersson
2023-05-31  2:32   ` Abhinav Kumar
2023-05-31  2:53 ` Dmitry Baryshkov
2023-05-31  3:05   ` [Freedreno] " Abhinav Kumar
2023-05-31 10:07     ` Dmitry Baryshkov
     [not found]       ` <a0b7a9fc-eb3c-3b26-b11d-fe1fb47b2c51@quicinc.com>
2023-06-04  2:21         ` Dmitry Baryshkov
2023-06-06  0:55           ` Abhinav Kumar
2023-06-06  1:03             ` Dmitry Baryshkov
2023-06-06  2:35               ` Abhinav Kumar [this message]
2023-06-06 11:14                 ` Dmitry Baryshkov
2023-06-06 17:51                   ` Abhinav Kumar
2023-06-06 19:09                     ` Dmitry Baryshkov
2023-06-06 19:28                       ` Abhinav Kumar
2023-06-06 21:01                         ` Dmitry Baryshkov
2023-06-06 21:08                           ` Dmitry Baryshkov
2023-06-06 21:16                             ` Abhinav Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=804363cf-f6cf-71a6-be8f-5fc00eea3154@quicinc.com \
    --to=quic_abhinavk@quicinc.com \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=quic_jesszhan@quicinc.com \
    --cc=quic_khsieh@quicinc.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®