From: Lin Liu <lin.liu01@citrix.com>
To: jgross@suse.com, sstabellini@kernel.org
Cc: oleksandr_tyshchenko@epam.com, andrew.cooper3@citrix.com,
xen-devel@lists.xenproject.org, iommu@lists.linux.dev,
linux-kernel@vger.kernel.org, Lin Liu <lin.liu01@citrix.com>
Subject: [PATCH] xen/swiotlb: Check the segment boundary in range_straddles_page_boundary()
Date: Fri, 13 Nov 2026 12:47:33 +0000 [thread overview]
Message-ID: <807c3b040b02d7d89f1cac76eb137afbee91015d.1794573814.git.lin.liu01@citrix.com> (raw)
The block layer applies a device's DMA segment boundary to
pseudo-physical addresses, but in a Xen PV domain the bus address is the
machine address. A range that is contiguous in both spaces can still
cross the boundary in machine space and reach the device. AHCI declares
a 4 GiB boundary, and controllers that do not carry across it (e.g.
Marvell 88SE9230) then DMA the tail of the transfer 4 GiB too low.
Make range_straddles_page_boundary() also reject a contiguous range that
crosses the device's segment boundary in bus space, so all its callers
cover it. Streaming mappings are bounced; coherent allocations are
already naturally aligned via range_requires_alignment().
Signed-off-by: Lin Liu <lin.liu01@citrix.com>
---
drivers/xen/swiotlb-xen.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index e2538824e..181f8cef2 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -82,10 +82,13 @@ static inline bool range_requires_alignment(phys_addr_t p, size_t size)
return IS_ALIGNED(p, algn) && !IS_ALIGNED(bus_addr, algn);
}
-static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
+static inline int range_straddles_page_boundary(struct device *dev,
+ phys_addr_t p, size_t size)
{
unsigned long next_bfn, xen_pfn = XEN_PFN_DOWN(p);
unsigned int i, nr_pages = XEN_PFN_UP(xen_offset_in_page(p) + size);
+ unsigned long mask;
+ dma_addr_t dma;
next_bfn = pfn_to_bfn(xen_pfn);
@@ -93,7 +96,10 @@ static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
if (pfn_to_bfn(++xen_pfn) != ++next_bfn)
return 1;
- return 0;
+ /* Contiguous, but may cross the segment boundary in bus space */
+ mask = dma_get_seg_boundary(dev);
+ dma = xen_phys_to_dma(dev, p);
+ return size - 1 <= mask && ((dma ^ (dma + size - 1)) & ~mask);
}
static struct io_tlb_pool *xen_swiotlb_find_pool(struct device *dev,
@@ -158,7 +164,7 @@ xen_swiotlb_alloc_coherent(struct device *dev, size_t size,
*dma_handle = xen_phys_to_dma(dev, phys);
if (*dma_handle + size - 1 > dma_mask ||
- range_straddles_page_boundary(phys, size) ||
+ range_straddles_page_boundary(dev, phys, size) ||
range_requires_alignment(phys, size)) {
if (xen_create_contiguous_region(phys, order, fls64(dma_mask),
dma_handle) != 0)
@@ -185,7 +191,7 @@ xen_swiotlb_free_coherent(struct device *dev, size_t size, void *vaddr,
size = ALIGN(size, XEN_PAGE_SIZE);
if (WARN_ON_ONCE(dma_handle + size - 1 > dev->coherent_dma_mask) ||
- WARN_ON_ONCE(range_straddles_page_boundary(phys, size) ||
+ WARN_ON_ONCE(range_straddles_page_boundary(dev, phys, size) ||
range_requires_alignment(phys, size)))
return;
@@ -233,7 +239,7 @@ static dma_addr_t xen_swiotlb_map_phys(struct device *dev, phys_addr_t phys,
*/
if (dma_capable(dev, dev_addr, size, true, attrs) &&
!dma_kmalloc_needs_bounce(dev, size, dir) &&
- !range_straddles_page_boundary(phys, size) &&
+ !range_straddles_page_boundary(dev, phys, size) &&
!xen_arch_need_swiotlb(dev, phys, dev_addr) &&
!is_swiotlb_force_bounce(dev))
goto done;
base-commit: 7e1392a42ea288d70a266f6553fe06f57f8647ea
--
2.52.0
next reply other threads:[~2026-11-13 12:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 12:47 Lin Liu [this message]
2026-11-18 11:25 ` Ross Lagerwall
2026-11-18 12:24 ` Jürgen Groß
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=807c3b040b02d7d89f1cac76eb137afbee91015d.1794573814.git.lin.liu01@citrix.com \
--to=lin.liu01@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=iommu@lists.linux.dev \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleksandr_tyshchenko@epam.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®