From: Hans de Goede <hdegoede@redhat.com>
To: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] backlight: lp855x: Add support ACPI enumeration
Date: Tue, 2 Nov 2021 23:50:00 +0100 [thread overview]
Message-ID: <812ff68b-2b4a-3993-245a-ea791e6caf7c@redhat.com> (raw)
In-Reply-To: <20211102122253.s4oc2p7hmy7w2qgn@maple.lan>
Hi Daniel,
Thank you for the quick review of this series.
On 11/2/21 13:22, Daniel Thompson wrote:
> On Mon, Nov 01, 2021 at 07:55:17PM +0100, Hans de Goede wrote:
>> The Xiaomi Mi Pad 2 tablet uses an ACPI enumerated LP8556 backlight
>> controller for its LCD-panel, with a Xiaomi specific ACPI HID of
>> "XMCC0001", add support for this.
>>
>> Note the new "if (id)" check also fixes a NULL pointer deref when a user
>> tries to manually bind the driver from sysfs.
>>
>> When CONFIG_ACPI is disabled acpi_match_device() will always return NULL,
>> so the lp855x_parse_acpi() call will get optimized away.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> drivers/video/backlight/lp855x_bl.c | 70 ++++++++++++++++++++++++-----
>> 1 file changed, 60 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
>> index d1d27d5eb0f2..f075ec84acfb 100644
>> --- a/drivers/video/backlight/lp855x_bl.c
>> +++ b/drivers/video/backlight/lp855x_bl.c
>> @@ -338,10 +339,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
>> return -EINVAL;
>> }
>>
>> - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> - if (!pdata)
>> - return -ENOMEM;
>> -
>> of_property_read_string(node, "bl-name", &pdata->name);
>> of_property_read_u8(node, "dev-ctrl", &pdata->device_control);
>> of_property_read_u8(node, "init-brt", &pdata->initial_brightness);
>
> Shouldn't there be a removal of an `lp->pdata = pdata` from somewhere in
> this function?
Ack, fixed for v2.
>> @@ -379,8 +376,31 @@ static int lp855x_parse_dt(struct lp855x *lp)
>> }
>> #endif
>>
>> +static int lp855x_parse_acpi(struct lp855x *lp)
>> +{
>> + int ret;
>> +
>> + /*
>> + * On ACPI the device has already been initialized by the firmware
>
> Perhaps nitpicking but ideally I'd like "and is in register mode" here
> since I presume it can also be assumed that everything with this HID
> has adopted that).
Nope not nitpicking, that is a good point, also fixed for v2.
Regards,
Hans
next prev parent reply other threads:[~2021-11-02 22:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 18:55 [PATCH 1/3] backlight: lp855x: Move device_config setting out of lp855x_configure() Hans de Goede
2021-11-01 18:55 ` [PATCH 2/3] backlight: lp855x: Add dev helper variable to lp855x_probe() Hans de Goede
2021-11-02 12:23 ` Daniel Thompson
2021-11-01 18:55 ` [PATCH 3/3] backlight: lp855x: Add support ACPI enumeration Hans de Goede
2021-11-02 12:22 ` Daniel Thompson
2021-11-02 22:50 ` Hans de Goede [this message]
2021-11-02 12:24 ` [PATCH 1/3] backlight: lp855x: Move device_config setting out of lp855x_configure() Daniel Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=812ff68b-2b4a-3993-245a-ea791e6caf7c@redhat.com \
--to=hdegoede@redhat.com \
--cc=daniel.thompson@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®