From: Pascal CHAPPERON <pascal.chapperon@wanadoo.fr>
To: Francois Romieu <romieu@fr.zoreil.com>, linux-kernel@vger.kernel.org
Cc: lars.vahlenberg@mandator.com,
Alexey Dobriyan <adobriyan@gmail.com>,
jgarzik@pobox.com
Subject: Re: [patch 2.6.13-rc3] sis190 driver
Date: Sat, 30 Jul 2005 11:32:11 +0200 (CEST) [thread overview]
Message-ID: <8141764.1122715931842.JavaMail.www@wwinf0802> (raw)
> Message du 29/07/05 00:13
> De : "Francois Romieu" <romieu@fr.zoreil.com>
[...]
> Changes from previous version (20050722)
[...]
> o Minor round of mii/phy related changes. May crash.
>
> Testing reports/review/patches are always appreciated.
>
sis190-120 compiles, loads but does not work (sis190_init_phy() function).
# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... failed; no link present. Check cable?
[FAILED]
#dmesg
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Read MAC address from APC.
eth0: Unknown PHY transceiver at address 1.
0000:00:04.0: sis190 at ffffc20000004c00 (IRQ: 11), 00:11:2f:e9:42:70
eth0: Enabling Auto-negotiation.
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Current message level: 0x00000037 (55)
Link detected: no
I reverted to sis190-110, which works well on my box.
--
Pascal
next reply other threads:[~2005-07-30 9:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-30 9:32 Pascal CHAPPERON [this message]
2005-07-30 10:10 ` Francois Romieu
-- strict thread matches above, loose matches on Subject: below --
2005-07-30 11:12 Pascal CHAPPERON
2005-07-30 11:22 ` Francois Romieu
2005-07-28 22:11 Francois Romieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8141764.1122715931842.JavaMail.www@wwinf0802 \
--to=pascal.chapperon@wanadoo.fr \
--cc=adobriyan@gmail.com \
--cc=jgarzik@pobox.com \
--cc=lars.vahlenberg@mandator.com \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®