From: <sean.wang@mediatek.com>
To: <matthias.bgg@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Cc: <chen.zhong@mediatek.com>, <chenglin.xu@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v6 2/7] soc: mediatek: pwrap: add pwrap_read32 for reading in 32-bit mode
Date: Wed, 18 Oct 2017 16:28:43 +0800 [thread overview]
Message-ID: <8195cc93eb652b8062bc58f85c1205e96a2b5bd3.1508313105.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1508313105.git.sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Some regulators such as MediaTek MT6380 has to be read in 32-bit mode.
So the patch adds pwrap_read32, rename old pwrap_read into pwrap_read16
and one function pointer is introduced for increasing flexibility allowing
the determination which mode is used by the pwrap slave detection through
device tree.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/soc/mediatek/mtk-pmic-wrap.c | 55 +++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index f095faa..06930e2 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -487,6 +487,7 @@ static int mt8135_regs[] = {
enum pmic_type {
PMIC_MT6323,
+ PMIC_MT6380,
PMIC_MT6397,
};
@@ -496,9 +497,16 @@ enum pwrap_type {
PWRAP_MT8173,
};
+struct pmic_wrapper;
struct pwrap_slv_type {
const u32 *dew_regs;
enum pmic_type type;
+ /*
+ * pwrap operations are highly associated with the PMIC types,
+ * so the pointers added increases flexibility allowing determination
+ * which type is used by the detection through device tree.
+ */
+ int (*pwrap_read)(struct pmic_wrapper *wrp, u32 adr, u32 *rdata);
};
struct pmic_wrapper {
@@ -609,7 +617,7 @@ static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
return 0;
}
-static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
+static int pwrap_read16(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
{
int ret;
@@ -632,6 +640,39 @@ static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
return 0;
}
+static int pwrap_read32(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
+{
+ int ret, msb;
+
+ *rdata = 0;
+ for (msb = 0; msb < 2; msb++) {
+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
+ if (ret) {
+ pwrap_leave_fsm_vldclr(wrp);
+ return ret;
+ }
+
+ pwrap_writel(wrp, ((msb << 30) | (adr << 16)),
+ PWRAP_WACS2_CMD);
+
+ ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr);
+ if (ret)
+ return ret;
+
+ *rdata += (PWRAP_GET_WACS_RDATA(pwrap_readl(wrp,
+ PWRAP_WACS2_RDATA)) << (16 * msb));
+
+ pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
+ }
+
+ return 0;
+}
+
+static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
+{
+ return wrp->slave->pwrap_read(wrp, adr, rdata);
+}
+
static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata)
{
return pwrap_read(context, adr, rdata);
@@ -752,6 +793,8 @@ static int pwrap_mt2701_init_reg_clock(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
break;
+ default:
+ break;
}
return 0;
@@ -815,6 +858,8 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_EN],
0x1);
break;
+ default:
+ break;
}
/* wait for cipher data ready@AP */
@@ -1036,11 +1081,19 @@ static const struct regmap_config pwrap_regmap_config = {
static const struct pwrap_slv_type pmic_mt6323 = {
.dew_regs = mt6323_regs,
.type = PMIC_MT6323,
+ .pwrap_read = pwrap_read16,
+};
+
+static const struct pwrap_slv_type pmic_mt6380 = {
+ .dew_regs = NULL,
+ .type = PMIC_MT6380,
+ .pwrap_read = pwrap_read32,
};
static const struct pwrap_slv_type pmic_mt6397 = {
.dew_regs = mt6397_regs,
.type = PMIC_MT6397,
+ .pwrap_read = pwrap_read16,
};
static const struct of_device_id of_slave_match_tbl[] = {
--
2.7.4
next prev parent reply other threads:[~2017-10-18 8:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-18 8:28 [PATCH v6 0/7] Add PMIC support to MediaTek MT7622 SoC sean.wang
2017-10-18 8:28 ` [PATCH v6 1/7] dt-bindings: arm: mediatek: add MT7622 string to the PMIC wrapper doc sean.wang
2017-10-18 8:28 ` sean.wang [this message]
2017-10-18 8:28 ` [PATCH v6 3/7] soc: mediatek: pwrap: add pwrap_write32 for writing in 32-bit mode sean.wang
2017-10-18 8:28 ` [PATCH v6 4/7] soc: mediatek: pwrap: refactor pwrap_init for the various PMIC types sean.wang
2017-10-18 8:28 ` [PATCH v6 5/7] soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap sean.wang
2017-10-18 8:28 ` [PATCH v6 6/7] soc: mediatek: pwrap: add common way for setup CS timing extenstion sean.wang
2017-10-18 8:28 ` [PATCH v6 7/7] soc: mediatek: pwrap: add support for MT7622 SoC sean.wang
2017-10-20 9:58 ` [PATCH v6 0/7] Add PMIC support to MediaTek " Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8195cc93eb652b8062bc58f85c1205e96a2b5bd3.1508313105.git.sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=chen.zhong@mediatek.com \
--cc=chenglin.xu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®