Re: [PATCH] drivers/staging/media/atomisp: replace legacy GPIO APIs in atomisp_gmin_platform

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 3-Dec-24 10:14 AM, Song Chen wrote:
> In atomisp_gmin_platform, gpio0 and gpio1 have moved to descriptor-based
> GPIO APIs, but v1p8_gpio and v2p8_gpio still remain calling legacy ones,
> such as gpio_request.
> 
> This patch replaces old with new, also removes including gpio.h.
> 
> Signed-off-by: Song Chen <chensong_2000@189.cn>

Thank you for your patch, this is already addresses by this patch
which I plan to merge soon:

https://lore.kernel.org/linux-media/20241107221134.596149-1-hdegoede@redhat.com/

Regards,

Hans


> ---
>  .../media/atomisp/pci/atomisp_gmin_platform.c | 63 ++++++++-----------
>  1 file changed, 25 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
> index e176483df301..7ff548ac3171 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
> @@ -11,7 +11,6 @@
>  #include <linux/mfd/intel_soc_pmic.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/gpio/consumer.h>
> -#include <linux/gpio.h>
>  #include <linux/platform_device.h>
>  #include "../../include/linux/atomisp_platform.h"
>  #include "../../include/linux/atomisp_gmin_platform.h"
> @@ -85,8 +84,8 @@ struct gmin_subdev {
>  	bool v2p8_on;
>  	bool v1p2_on;
>  
> -	int v1p8_gpio;
> -	int v2p8_gpio;
> +	struct gpio_desc *v1p8_gpiod;
> +	struct gpio_desc *v2p8_gpiod;
>  
>  	u8 pwm_i2c_addr;
>  
> @@ -548,23 +547,6 @@ static int gmin_subdev_add(struct gmin_subdev *gs)
>  	else
>  		dev_info(dev, "will handle gpio1 via ACPI\n");
>  
> -	/*
> -	 * Those are used only when there is an external regulator apart
> -	 * from the PMIC that would be providing power supply, like on the
> -	 * two cases below:
> -	 *
> -	 * The ECS E7 board drives camera 2.8v from an external regulator
> -	 * instead of the PMIC.  There's a gmin_CamV2P8 config variable
> -	 * that specifies the GPIO to handle this particular case,
> -	 * but this needs a broader architecture for handling camera power.
> -	 *
> -	 * The CHT RVP board drives camera 1.8v from an* external regulator
> -	 * instead of the PMIC just like ECS E7 board.
> -	 */
> -
> -	gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1);
> -	gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1);
> -
>  	/*
>  	 * FIXME:
>  	 *
> @@ -830,21 +812,23 @@ static int gmin_v1p2_ctrl(struct v4l2_subdev *subdev, int on)
>  static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on)
>  {
>  	struct gmin_subdev *gs = find_gmin_subdev(subdev);
> +	struct i2c_client *client = v4l2_get_subdevdata(gs->subdev);
> +	struct device *dev = &client->dev;
>  	int ret;
>  	int value;
>  	int reg;
> +	int v1p8_gpio;
>  
>  	if (!gs || gs->v1p8_on == on)
>  		return 0;
>  
> -	if (gs->v1p8_gpio >= 0) {
> -		pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n",
> -			gs->v1p8_gpio);
> -		ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en");
> -		if (!ret)
> -			ret = gpio_direction_output(gs->v1p8_gpio, 0);
> -		if (ret)
> +	v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1);
> +	if (v1p8_gpio >= 0) {
> +		gs->v1p8_gpiod = gpiod_get_index(dev, "camera_v1p8", v1p8_gpio, GPIOD_ASIS);
> +		if (IS_ERR(gs->v1p8_gpiod))
>  			pr_err("V1P8 GPIO initialization failed\n");
> +		else
> +			gpiod_direction_output(gs->v1p8_gpiod, 0);
>  	}
>  
>  	gs->v1p8_on = on;
> @@ -861,8 +845,8 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on)
>  			goto out; /* Still needed */
>  	}
>  
> -	if (gs->v1p8_gpio >= 0)
> -		gpio_set_value(gs->v1p8_gpio, on);
> +	if (v1p8_gpio >= 0)
> +		gpiod_set_value(gs->v1p8_gpiod, on);
>  
>  	if (gs->v1p8_reg) {
>  		regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000);
> @@ -911,21 +895,24 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on)
>  static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on)
>  {
>  	struct gmin_subdev *gs = find_gmin_subdev(subdev);
> +	struct i2c_client *client = v4l2_get_subdevdata(gs->subdev);
> +	struct device *dev = &client->dev;
>  	int ret;
>  	int value;
>  	int reg;
> +	int v2p8_gpio;
>  
>  	if (WARN_ON(!gs))
>  		return -ENODEV;
>  
> -	if (gs->v2p8_gpio >= 0) {
> -		pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n",
> -			gs->v2p8_gpio);
> -		ret = gpio_request(gs->v2p8_gpio, "camera_v2p8");
> -		if (!ret)
> -			ret = gpio_direction_output(gs->v2p8_gpio, 0);
> -		if (ret)
> +	v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1);
> +	if (v2p8_gpio >= 0) {
> +		pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", v2p8_gpio);
> +		gs->v2p8_gpiod = gpiod_get_index(dev, "camera_v2p8", v2p8_gpio, GPIOD_ASIS);
> +		if (IS_ERR(gs->v2p8_gpiod))
>  			pr_err("V2P8 GPIO initialization failed\n");
> +		else
> +			gpiod_direction_output(gs->v2p8_gpiod, 0);
>  	}
>  
>  	if (gs->v2p8_on == on)
> @@ -944,8 +931,8 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on)
>  			goto out; /* Still needed */
>  	}
>  
> -	if (gs->v2p8_gpio >= 0)
> -		gpio_set_value(gs->v2p8_gpio, on);
> +	if (v2p8_gpio >= 0)
> +		gpiod_set_value(gs->v2p8_gpiod, on);
>  
>  	if (gs->v2p8_reg) {
>  		regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000);