From: Jeremy Bingham <jbingham@gmail.com>
To: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, brauner@kernel.org,
jkoolstra@xs4all.nl, jack@suse.cz, hch@infradead.org,
viro@zeniv.linux.org.uk, syzkaller@googlegroups.com,
Jeremy Bingham <jbingham@gmail.com>
Subject: [PATCH v2 4/4] minix: fix symlink and truncate for iomap
Date: Sat, 27 Jun 2026 22:15:56 -0700 [thread overview]
Message-ID: <81d473d2763a781069f5a4cc1a7147fda469f62a.1782619718.git.jbingham@gmail.com> (raw)
In-Reply-To: <cover.1782619718.git.jbingham@gmail.com>
The original minix iomap conversion patches had a couple of issues
exposed by syzbot:
1. NULL pointer dereferences in page_symlink. Since the iomap based
minix_aops no longer used write_begin and write_end, when page_link
attempted to call aops->write_begin there was a crash because there was
no longer a pointer assigned to aops->write_begin. This was fixed with a
custom function that writes the symlink target directly to a newly
allocated data block acquired with minix_new_block and sb_getblk, thus
bypassing the aops write path entirely. The symlink read path was in
turn replaced with a new minix_get_link that reads the target from the
first data block directly with sb_bread, similar to how ext4_get_link
does it.
2. Truncate crashed. There was a conflict in minix's truncate() function
between buffer_head and iomap where block_truncate_page was attaching
buffer_heads to folios, but this ran up against how iomap works. Fixed
this by using iomap_truncate_page for inodes using minix_aops and
block_truncate_page for inodes with minix_dir_aops.
Also, minix_symlink_inode_operations now has .setattr = minix_setattr so
symlinks can be truncated more properly through iomap rather than using
the default simple_setattr.
Signed-off-by: Jeremy Bingham <jbingham@gmail.com>
---
fs/minix/inode.c | 4 +-
fs/minix/itree_common.c | 11 +++-
fs/minix/minix.h | 5 +-
fs/minix/namei.c | 137 +++++++++++++++++++++++++++++++++++++++-
4 files changed, 152 insertions(+), 5 deletions(-)
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 2ba6766fce51..b113c44764ff 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -573,8 +573,9 @@ static const struct address_space_operations minix_dir_aops = {
};
static const struct inode_operations minix_symlink_inode_operations = {
- .get_link = page_get_link,
+ .get_link = minix_get_link,
.getattr = minix_getattr,
+ .setattr = minix_setattr,
};
void minix_set_inode(struct inode *inode, dev_t rdev)
@@ -838,4 +839,3 @@ module_init(init_minix_fs)
module_exit(exit_minix_fs)
MODULE_DESCRIPTION("Minix file system");
MODULE_LICENSE("GPL");
-
diff --git a/fs/minix/itree_common.c b/fs/minix/itree_common.c
index c3cd2c75af9c..5a8b73a7beda 100644
--- a/fs/minix/itree_common.c
+++ b/fs/minix/itree_common.c
@@ -311,7 +311,16 @@ static inline void truncate (struct inode * inode)
long iblock;
iblock = (inode->i_size + sb->s_blocksize -1) >> sb->s_blocksize_bits;
- block_truncate_page(inode->i_mapping, inode->i_size, get_block);
+
+ /* Depending on what address space operations are being used by the
+ * inode being truncated, we need to either call iomap_truncate_page or
+ * block_truncate_page.
+ */
+ if (inode->i_mapping->a_ops == &minix_aops)
+ iomap_truncate_page(inode, inode->i_size, NULL,
+ minix_iomap_ops_ver(inode), NULL, NULL);
+ else
+ block_truncate_page(inode->i_mapping, inode->i_size, get_block);
n = block_to_path(inode, iblock, offsets);
if (!n)
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 76718f789369..d1a890e96abe 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -57,7 +57,7 @@ int minix_new_block(struct inode *inode);
void minix_free_block(struct inode *inode, unsigned long block);
unsigned long minix_count_free_blocks(struct super_block *sb);
int minix_getattr(struct mnt_idmap *, const struct path *,
- struct kstat *, u32, unsigned int);
+ struct kstat *, u32, unsigned);
int minix_setattr(struct mnt_idmap *idmap, struct dentry *dentry,
struct iattr *attr);
int minix_prepare_chunk(struct folio *folio, loff_t pos, unsigned len);
@@ -82,6 +82,9 @@ int minix_make_empty(struct inode*, struct inode*);
int minix_empty_dir(struct inode*);
int minix_set_link(struct minix_dir_entry *de, struct folio *folio,
struct inode *inode);
+extern const char *minix_get_link(struct dentry *dentry, struct inode *inode,
+ struct delayed_call *callback);
+
struct minix_dir_entry *minix_dotdot(struct inode*, struct folio **);
ino_t minix_inode_by_name(struct dentry*);
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index 263e4ba8b1c8..e245f55a68ff 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -6,6 +6,8 @@
*/
#include "minix.h"
+#include <linux/buffer_head.h>
+#include <linux/namei.h>
static int add_nondir(struct dentry *dentry, struct inode *inode)
{
@@ -69,6 +71,101 @@ static int minix_create(struct mnt_idmap *idmap, struct inode *dir,
return minix_mknod(&nop_mnt_idmap, dir, dentry, mode, 0);
}
+static inline u16 *v1_i_data(struct inode *inode)
+{
+ return (u16 *)minix_i(inode)->u.i1_data;
+}
+
+static inline u32 *v2_i_data(struct inode *inode)
+{
+ return (u32 *)minix_i(inode)->u.i2_data;
+}
+
+static inline u16 cpu_to_v1_block(sector_t n)
+{
+ return n;
+}
+
+static inline u32 cpu_to_v2_block(sector_t n)
+{
+ return n;
+}
+
+static inline sector_t v1_block_to_cpu(u16 n)
+{
+ return n;
+}
+
+static inline sector_t v2_block_to_cpu(u32 n)
+{
+ return n;
+}
+
+/* Reimplement page_symlink's general logic while avoiding using buffer head
+ * based aops operations like aops->write_begin so things behave better with
+ * the new regime of iomap based aops operations. Cribbing from page_symlink in
+ * fs/namei.c and ext4's ext4_init_symlink_block.
+ */
+static int __page_symlink(struct inode *inode, const char *symname, int len)
+{
+ struct super_block *sb = inode->i_sb;
+ struct buffer_head *bh;
+ char *kaddr;
+ int err = 0;
+ u16 *p16; /* v1 16 bit block */
+ u32 *p32; /* v2/3 32 bit block */
+
+ sector_t phys;
+
+ phys = minix_new_block(inode);
+ if (!phys) {
+ err = -ENOSPC;
+ goto ps_out;
+ }
+
+ if (INODE_VERSION(inode) == MINIX_V1) {
+ p16 = v1_i_data(inode);
+ *p16 = cpu_to_v1_block(phys);
+ } else {
+ p32 = v2_i_data(inode);
+ *p32 = cpu_to_v2_block(phys);
+ }
+
+ bh = sb_getblk(sb, phys);
+ if (!bh) {
+ err = -ENOMEM;
+ goto ps_fail;
+ }
+
+ lock_buffer(bh);
+ kaddr = (char *)bh->b_data;
+ memset(kaddr, 0, sb->s_blocksize);
+ memcpy(kaddr, symname, len);
+ inode->i_size = len - 1;
+ set_buffer_uptodate(bh);
+ unlock_buffer(bh);
+
+ mmb_mark_buffer_dirty(bh, &minix_i(inode)->i_metadata_bhs);
+ if (inode_needs_sync(inode)) {
+ sync_dirty_buffer(bh);
+ if (buffer_req(bh) && !buffer_uptodate(bh)) {
+ pr_err("i/o error syncing itable block");
+ err = -EIO;
+ }
+
+ }
+
+ mark_inode_dirty(inode);
+ brelse(bh);
+
+ps_out:
+ return err;
+
+ps_fail:
+ minix_free_block(inode, phys);
+ goto ps_out;
+}
+
static int minix_symlink(struct mnt_idmap *idmap, struct inode *dir,
struct dentry *dentry, const char *symname)
{
@@ -84,7 +181,7 @@ static int minix_symlink(struct mnt_idmap *idmap, struct inode *dir,
return PTR_ERR(inode);
minix_set_inode(inode, 0);
- err = page_symlink(inode, symname, i);
+ err = __page_symlink(inode, symname, i);
if (unlikely(err)) {
inode_dec_link_count(inode);
iput(inode);
@@ -273,6 +370,44 @@ static int minix_rename(struct mnt_idmap *idmap,
return err;
}
+/* straight up thievery here; stolen verbatim from ext4_get_link */
+static void minix_free_link(void *bh)
+{
+ brelse(bh);
+}
+
+/* Borrowing from ext4_get_link to a degree; since minix inodes and symlinks
+ * are significantly simpler, we don't need to do nearly as much as ext4
+ * requires for old-timey ext4 slow links.
+ */
+const char *minix_get_link(struct dentry *dentry, struct inode *inode,
+ struct delayed_call *callback)
+{
+ struct super_block *sb = inode->i_sb;
+ struct buffer_head *bh;
+ sector_t blk;
+
+ /* Get yon block, depending on what version of the minix fs this is. */
+ if (INODE_VERSION(inode) == MINIX_V1)
+ blk = v1_block_to_cpu(*(v1_i_data(inode)));
+ else
+ blk = v2_block_to_cpu(*(v2_i_data(inode)));
+
+ bh = sb_bread(sb, blk);
+ if (IS_ERR(bh))
+ return ERR_CAST(bh);
+ if (!bh) {
+ pr_err("bad symlink on inode %llu", inode->i_ino);
+ return ERR_PTR(-EFSCORRUPTED);
+ }
+
+ set_delayed_call(callback, minix_free_link, bh);
+ nd_terminate_link(bh->b_data, inode->i_size,
+ inode->i_sb->s_blocksize - 1);
+
+ return bh->b_data;
+}
+
/*
* directories can handle most operations...
*/
--
2.47.3
next prev parent reply other threads:[~2026-06-28 5:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-28 5:15 [PATCH v2 0/4] minix: convert to iomap and add direct I/O Jeremy Bingham
2026-06-28 5:15 ` [PATCH v2 1/4] minix: add iomap infrastructure Jeremy Bingham
2026-07-01 18:06 ` Darrick J. Wong
2026-07-01 18:32 ` Jeremy Bingham
2026-06-28 5:15 ` [PATCH v2 2/4] minix: convert address space operations to iomap Jeremy Bingham
2026-07-01 18:14 ` Darrick J. Wong
2026-07-01 18:37 ` Jeremy Bingham
2026-07-01 18:47 ` Darrick J. Wong
2026-06-28 5:15 ` [PATCH v2 3/4] minix: convert file operations to iomap and add Jeremy Bingham
2026-07-01 18:21 ` Darrick J. Wong
2026-07-01 18:42 ` Jeremy Bingham
2026-06-28 5:15 ` Jeremy Bingham [this message]
2026-06-29 5:27 ` [syzbot ci] Re: minix: convert to iomap and add direct I/O syzbot ci
2026-06-30 3:05 ` Jeremy Bingham
2026-06-30 4:05 ` syzbot ci
2026-07-01 18:00 ` [PATCH v2 0/4] " Darrick J. Wong
2026-07-02 18:42 ` Jeremy Bingham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=81d473d2763a781069f5a4cc1a7147fda469f62a.1782619718.git.jbingham@gmail.com \
--to=jbingham@gmail.com \
--cc=brauner@kernel.org \
--cc=hch@infradead.org \
--cc=jack@suse.cz \
--cc=jkoolstra@xs4all.nl \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller@googlegroups.com \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®