Re: [PATCH 3/3] arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 21.07.2024 6:40 PM, Abel Vesa wrote:
> On 24-07-19 22:16:38, Konrad Dybcio wrote:
>> Add support for the aforementioned laptop. That includes:
>>
>> - input methods, incl. lid switch (keyboard needs the pdc
>>   wakeup-parent removal hack..)
>> - NVMe, WiFi
>> - USB-C ports
>> - GPU, display
>> - DSPs
>>
>> Notably, the USB-A ports on the side are depenedent on the USB
>> multiport controller making it upstream.
>>
>> At least one of the eDP panels used (non-touchscreen) identifies as
>> BOE 0x0b66.
>>
>> See below for the hardware description from the OEM.
>>
>> Link: https://www.lenovo.com/us/en/p/laptops/thinkpad/thinkpadt/lenovo-thinkpad-t14s-gen-6-(14-inch-snapdragon)/len101t0099
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> Few comments below. Otherwise, LGTM.
> 
> Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
> 
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>>  .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts     | 792 +++++++++++++++++++++
>>  2 files changed, 793 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 0e5c810304fb..734a05e04c4a 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -261,6 +261,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk-display-card.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
> 
> So what happens for SKUs of this model wil have x1e80100 ?
> 
> Maybe we should stick to x1e80100 ?

This one only ships with 78100

[...]

>> +	vreg_edp_3p3: regulator-edp-3p3 {
>> +		compatible = "regulator-fixed";
>> +
>> +		regulator-name = "VREG_EDP_3P3";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +
>> +		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
>> +		enable-active-high;
>> +
>> +		pinctrl-0 = <&edp_reg_en>;
>> +		pinctrl-names = "default";
>> +
>> +		regulator-always-on;
> 
> Drop this.

Oops!

[...]

>> +
>> +	edp_reg_en: edp-reg-en-state {
>> +		pins = "gpio70";
>> +		function = "gpio";
>> +		drive-strength = <16>;
>> +		bias-pull-up;
> 
> bias-disable, maybe ?

Yeah, probably

Konrad