From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Nate Drude <nate.d@variscite.com>
Subject: [PATCH v3 3/3] arm64: dts: imx8mm-var-dart: increase PHY reset deassert delay
Date: Fri, 18 Sep 2026 00:25:45 +0200 [thread overview]
Message-ID: <827798e569775b16aae6c65ff08e3cfbb2324e0c.1789683864.git.stefano.r@variscite.com> (raw)
In-Reply-To: <cover.1789683864.git.stefano.r@variscite.com>
From: Stefano Radaelli <stefano.r@variscite.com>
The Ethernet PHY reset signal also controls the regulators supplying
VDDA2P5 and VDD1P0, so releasing reset restores the PHY's 2.5 V and
1.0 V analog supplies.
The existing 100 ms reset deassertion delay is not sufficient for
reliable PHY detection. The TI DP83867 requires 200 ms of stabilization
after power-up before MDIO register access.
Increase the reset deassertion delay to 200 ms to ensure reliable PHY
detection across repeated boots.
Co-developed-by: Nate Drude <nate.d@variscite.com>
Signed-off-by: Nate Drude <nate.d@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v2->v3:
-
v1->v2:
-
arch/arm64/boot/dts/freescale/imx8mm-var-dart.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-dart.dtsi
index cb7998616a87..c5f0e22f549b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-dart.dtsi
@@ -123,7 +123,7 @@ ethphy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
- reset-deassert-us = <100000>;
+ reset-deassert-us = <200000>;
vddio-supply = <®_phy_vddio>;
};
};
--
2.47.3
next prev parent reply other threads:[~2026-09-17 22:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-17 22:25 [PATCH v3 0/3] arm64: dts: imx8mm-var-dart: update SoM support Stefano Radaelli
2026-09-17 22:25 ` [PATCH v3 1/3] arm64: dts: imx8mm-var-dart: configure SAI3 synchronous RX mode Stefano Radaelli
2026-09-17 22:25 ` [PATCH v3 2/3] arm64: dts: imx8mm-var-dart: add TPM support Stefano Radaelli
2026-09-17 22:25 ` Stefano Radaelli [this message]
2026-09-28 19:43 ` [PATCH v3 0/3] arm64: dts: imx8mm-var-dart: update SoM support Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=827798e569775b16aae6c65ff08e3cfbb2324e0c.1789683864.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nate.d@variscite.com \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®