From: Thomas Zimmermann <tzimmermann@suse.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 07/11] drm/udl: Drop unneeded alignment
Date: Wed, 7 Sep 2022 09:29:37 +0200 [thread overview]
Message-ID: <8291de03-c5b5-e744-62f0-8755c6eada4a@suse.de> (raw)
In-Reply-To: <20220906073951.2085-8-tiwai@suse.de>
[-- Attachment #1.1: Type: text/plain, Size: 4081 bytes --]
Hi
Am 06.09.22 um 09:39 schrieb Takashi Iwai:
> The alignment of damaged area was needed for the original udlfb driver
> that tried to trim the superfluous copies between front and backend
> buffers and handle data in long int. It's not the case for udl DRM
> driver, hence we can omit the whole unneeded alignment, as well as the
> dead code.
>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
with an entirely optional comment below.
> ---
> drivers/gpu/drm/udl/udl_modeset.c | 28 +--------------------
> drivers/gpu/drm/udl/udl_transfer.c | 40 ------------------------------
> 2 files changed, 1 insertion(+), 67 deletions(-)
>
> diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
> index c34d564773a3..9896c16c74f5 100644
> --- a/drivers/gpu/drm/udl/udl_modeset.c
> +++ b/drivers/gpu/drm/udl/udl_modeset.c
> @@ -243,28 +243,6 @@ static long udl_log_cpp(unsigned int cpp)
> return __ffs(cpp);
> }
>
> -static int udl_aligned_damage_clip(struct drm_rect *clip, int x, int y,
> - int width, int height)
> -{
> - int x1, x2;
> -
> - if (WARN_ON_ONCE(x < 0) ||
> - WARN_ON_ONCE(y < 0) ||
> - WARN_ON_ONCE(width < 0) ||
> - WARN_ON_ONCE(height < 0))
> - return -EINVAL;
> -
> - x1 = ALIGN_DOWN(x, sizeof(unsigned long));
> - x2 = ALIGN(width + (x - x1), sizeof(unsigned long)) + x1;
> -
> - clip->x1 = x1;
> - clip->y1 = y;
> - clip->x2 = x2;
> - clip->y2 = y + height;
> -
> - return 0;
> -}
> -
> static int udl_handle_damage(struct drm_framebuffer *fb,
> const struct iosys_map *map,
> int x, int y, int width, int height)
> @@ -282,11 +260,7 @@ static int udl_handle_damage(struct drm_framebuffer *fb,
> return ret;
> log_bpp = ret;
>
> - ret = udl_aligned_damage_clip(&clip, x, y, width, height);
> - if (ret)
> - return ret;
> - else if ((clip.x2 > fb->width) || (clip.y2 > fb->height))
> - return -EINVAL;
> + drm_rect_init(&clip, x, y, width, height);
The clip rectangle could be passed directly by the caller, which would
simplify the update function. But that's really just nitpicking.
Best regards
Thomas
>
> ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
> if (ret)
> diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c
> index 176ef2a6a731..a431208dda85 100644
> --- a/drivers/gpu/drm/udl/udl_transfer.c
> +++ b/drivers/gpu/drm/udl/udl_transfer.c
> @@ -25,46 +25,6 @@
> #define MIN_RAW_PIX_BYTES 2
> #define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
>
> -/*
> - * Trims identical data from front and back of line
> - * Sets new front buffer address and width
> - * And returns byte count of identical pixels
> - * Assumes CPU natural alignment (unsigned long)
> - * for back and front buffer ptrs and width
> - */
> -#if 0
> -static int udl_trim_hline(const u8 *bback, const u8 **bfront, int *width_bytes)
> -{
> - int j, k;
> - const unsigned long *back = (const unsigned long *) bback;
> - const unsigned long *front = (const unsigned long *) *bfront;
> - const int width = *width_bytes / sizeof(unsigned long);
> - int identical = width;
> - int start = width;
> - int end = width;
> -
> - for (j = 0; j < width; j++) {
> - if (back[j] != front[j]) {
> - start = j;
> - break;
> - }
> - }
> -
> - for (k = width - 1; k > j; k--) {
> - if (back[k] != front[k]) {
> - end = k+1;
> - break;
> - }
> - }
> -
> - identical = start + (width - end);
> - *bfront = (u8 *) &front[start];
> - *width_bytes = (end - start) * sizeof(unsigned long);
> -
> - return identical * sizeof(unsigned long);
> -}
> -#endif
> -
> static inline u16 pixel32_to_be16(const uint32_t pixel)
> {
> return (((pixel >> 3) & 0x001f) |
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
next prev parent reply other threads:[~2022-09-07 7:30 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-06 7:39 [PATCH v2 00/11] drm/udl: More fixes Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 01/11] drm/udl: Restore display mode on resume Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 02/11] drm/udl: Add reset_resume Takashi Iwai
2022-09-07 6:58 ` Daniel Vetter
2022-09-06 7:39 ` [PATCH v2 03/11] drm/udl: Enable damage clipping Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 04/11] Revert "drm/udl: Kill pending URBs at suspend and disconnect" Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 05/11] drm/udl: Suppress error print for -EPROTO at URB completion Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 06/11] drm/udl: Increase the default URB list size to 20 Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 07/11] drm/udl: Drop unneeded alignment Takashi Iwai
2022-09-07 7:29 ` Thomas Zimmermann [this message]
2022-09-08 7:01 ` Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 08/11] drm/udl: Fix potential URB leaks Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 09/11] drm/udl: Fix inconsistent urbs.count value during udl_free_urb_list() Takashi Iwai
2022-09-07 7:31 ` Thomas Zimmermann
2022-09-06 7:39 ` [PATCH v2 10/11] drm/udl: Don't re-initialize stuff at retrying the URB list allocation Takashi Iwai
2022-09-06 7:39 ` [PATCH v2 11/11] drm/udl: Sync pending URBs at the end of suspend Takashi Iwai
2022-09-07 7:34 ` Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8291de03-c5b5-e744-62f0-8755c6eada4a@suse.de \
--to=tzimmermann@suse.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®