Re: hci reset on init

[Marcel Holtmann <marcel@holtmann.org>]

Hi Dave,

> Recently, I find my usb bluetooth dongle doesn't work after reboot  
> or resume.
>
> Kernel report (with bluetooth mouse active):
>
> Feb 15 16:54:32 darkstar kernel: hci_acldata_packet: hci0 ACL packet  
> for unknown
> connection handle 43
> Feb 15 16:54:34 darkstar last message repeated 124 times
>
> I fixed it by adding HCI_RESET to CSR usb id:
>        { USB_DEVICE(0x0a12, 0x0001), .driver_info = HCI_CSR | 
> HCI_RESET},
>
> Maybe you have known that there's other reports about this on
> bluetooth list as well.
>
> Most of the ids in hci_usb.c have the HCI_RESET option set.  Does we
> need to do this automaticly?  I want to know whether sending reset
> request on init in hci_core.c is better, or at least the btusb driver
> need these porting.
>
> What's your opinion?

this is a clear NAK since you gonna break all old CSR based dongles.  
Within the Bluetooth 1.0b and 1.1 specification there was an issues  
with if HCI_Reset should only reset the Bluetooth internals or also  
the transport. So issuing HCI_Reset on an old dongle will cause an USB  
reset.

The solution is to find the build id when CSR produced correct  
firmware and set the HCI_RESET quirk based on that. I meant to do this  
for a long time, but so far never got around to inquiry the correct  
build id where this got fixed.

Regards

Marcel