From: Lizhi Hou <lizhi.hou@amd.com>
To: <ogabbay@kernel.org>, <quic_jhugo@quicinc.com>,
<dri-devel@lists.freedesktop.org>
Cc: <linux-kernel@vger.kernel.org>, <min.ma@amd.com>,
<max.zhen@amd.com>, <sonal.santan@amd.com>, <king.tam@amd.com>
Subject: Re: [PATCH V8 00/10] AMD XDNA driver
Date: Mon, 11 Nov 2024 10:15:18 -0800 [thread overview]
Message-ID: <82a0ed11-df10-3525-85c4-dd5a85d17a57@amd.com> (raw)
In-Reply-To: <20241111173230.655325-1-lizhi.hou@amd.com>
Sorry, just noticed that I miss merged one line. Please ignore this V8
set. I will send out V9 instead.
Lizhi
On 11/11/24 09:32, Lizhi Hou wrote:
> This patchset introduces a new Linux Kernel Driver, amdxdna for AMD NPUs.
> The driver is based on Linux accel subsystem.
>
> NPU (Neural Processing Unit) is an AI inference accelerator integrated
> into AMD client CPUs. NPU enables efficient execution of Machine Learning
> applications like CNNs, LLMs, etc. NPU is based on AMD XDNA
> architecture [1].
>
> AMD NPU consists of the following components:
>
> - Tiled array of AMD AI Engine processors.
> - Micro Controller which runs the NPU Firmware responsible for
> command processing, AIE array configuration, and execution management.
> - PCI EP for host control of the NPU device.
> - Interconnect for connecting the NPU components together.
> - SRAM for use by the NPU Firmware.
> - Address translation hardware for protected host memory access by the
> NPU.
>
> NPU supports multiple concurrent fully isolated contexts. Concurrent
> contexts may be bound to AI Engine array spatially and or temporarily.
>
> The driver is licensed under GPL-2.0 except for UAPI header which is
> licensed GPL-2.0 WITH Linux-syscall-note.
>
> User mode driver stack consists of XRT [2] and AMD AIE Plugin for IREE [3].
>
> The firmware for the NPU is distributed as a closed source binary, and has
> already been pushed to the DRM firmware repository [4].
>
> [1] https://www.amd.com/en/technologies/xdna.html
> [2] https://github.com/Xilinx/XRT
> [3] https://github.com/nod-ai/iree-amd-aie
> [4] https://gitlab.freedesktop.org/drm/firmware/-/tree/amd-ipu-staging/amdnpu
>
> Changes since v7:
> - Prealloc dma fence chain before publishing dma-fence
> - Install the job's finished fence in dma-resv rather than driver fence
>
> Changes since v6:
> - Revise command submission flow
>
> Changes since v5:
> - Remove wait_cmd ioctl and use syncobj instead
> - Cleanup spelling errors
> - Add dependencies in Kconfig
>
> Changes since v4:
> - Fix lockdep errors
> - Use __u* structure for struct aie_error
>
> Changes since v3:
> - Remove debug BO patch
> - Changes based on code review comments
>
> Changes since v2:
> - Add document amdnpu.rst
> - Change AIE2_DEVM_SIZE to 64M due to firmware change
> - Changes based on code review comments
>
> Changes since v1:
> - Remove some inline defines
> - Minor changes based on code review comments
>
> Lizhi Hou (10):
> accel/amdxdna: Add documentation for AMD NPU accelerator driver
> accel/amdxdna: Add a new driver for AMD AI Engine
> accel/amdxdna: Support hardware mailbox
> accel/amdxdna: Add hardware resource solver
> accel/amdxdna: Add hardware context
> accel/amdxdna: Add GEM buffer object management
> accel/amdxdna: Add command execution
> accel/amdxdna: Add suspend and resume
> accel/amdxdna: Add error handling
> accel/amdxdna: Add query functions
>
> Documentation/accel/amdxdna/amdnpu.rst | 281 ++++++
> Documentation/accel/amdxdna/index.rst | 11 +
> Documentation/accel/index.rst | 1 +
> MAINTAINERS | 11 +
> drivers/accel/Kconfig | 1 +
> drivers/accel/Makefile | 1 +
> drivers/accel/amdxdna/Kconfig | 18 +
> drivers/accel/amdxdna/Makefile | 21 +
> drivers/accel/amdxdna/TODO | 5 +
> drivers/accel/amdxdna/aie2_ctx.c | 900 ++++++++++++++++++
> drivers/accel/amdxdna/aie2_error.c | 360 +++++++
> drivers/accel/amdxdna/aie2_message.c | 791 +++++++++++++++
> drivers/accel/amdxdna/aie2_msg_priv.h | 370 +++++++
> drivers/accel/amdxdna/aie2_pci.c | 762 +++++++++++++++
> drivers/accel/amdxdna/aie2_pci.h | 259 +++++
> drivers/accel/amdxdna/aie2_psp.c | 146 +++
> drivers/accel/amdxdna/aie2_smu.c | 119 +++
> drivers/accel/amdxdna/aie2_solver.c | 330 +++++++
> drivers/accel/amdxdna/aie2_solver.h | 154 +++
> drivers/accel/amdxdna/amdxdna_ctx.c | 553 +++++++++++
> drivers/accel/amdxdna/amdxdna_ctx.h | 162 ++++
> drivers/accel/amdxdna/amdxdna_gem.c | 622 ++++++++++++
> drivers/accel/amdxdna/amdxdna_gem.h | 65 ++
> drivers/accel/amdxdna/amdxdna_mailbox.c | 576 +++++++++++
> drivers/accel/amdxdna/amdxdna_mailbox.h | 124 +++
> .../accel/amdxdna/amdxdna_mailbox_helper.c | 61 ++
> .../accel/amdxdna/amdxdna_mailbox_helper.h | 42 +
> drivers/accel/amdxdna/amdxdna_pci_drv.c | 409 ++++++++
> drivers/accel/amdxdna/amdxdna_pci_drv.h | 123 +++
> drivers/accel/amdxdna/amdxdna_sysfs.c | 67 ++
> drivers/accel/amdxdna/npu1_regs.c | 101 ++
> drivers/accel/amdxdna/npu2_regs.c | 118 +++
> drivers/accel/amdxdna/npu4_regs.c | 118 +++
> drivers/accel/amdxdna/npu5_regs.c | 118 +++
> include/trace/events/amdxdna.h | 101 ++
> include/uapi/drm/amdxdna_accel.h | 436 +++++++++
> 36 files changed, 8337 insertions(+)
> create mode 100644 Documentation/accel/amdxdna/amdnpu.rst
> create mode 100644 Documentation/accel/amdxdna/index.rst
> create mode 100644 drivers/accel/amdxdna/Kconfig
> create mode 100644 drivers/accel/amdxdna/Makefile
> create mode 100644 drivers/accel/amdxdna/TODO
> create mode 100644 drivers/accel/amdxdna/aie2_ctx.c
> create mode 100644 drivers/accel/amdxdna/aie2_error.c
> create mode 100644 drivers/accel/amdxdna/aie2_message.c
> create mode 100644 drivers/accel/amdxdna/aie2_msg_priv.h
> create mode 100644 drivers/accel/amdxdna/aie2_pci.c
> create mode 100644 drivers/accel/amdxdna/aie2_pci.h
> create mode 100644 drivers/accel/amdxdna/aie2_psp.c
> create mode 100644 drivers/accel/amdxdna/aie2_smu.c
> create mode 100644 drivers/accel/amdxdna/aie2_solver.c
> create mode 100644 drivers/accel/amdxdna/aie2_solver.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_ctx.c
> create mode 100644 drivers/accel/amdxdna/amdxdna_ctx.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_gem.c
> create mode 100644 drivers/accel/amdxdna/amdxdna_gem.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_mailbox.c
> create mode 100644 drivers/accel/amdxdna/amdxdna_mailbox.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_mailbox_helper.c
> create mode 100644 drivers/accel/amdxdna/amdxdna_mailbox_helper.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_pci_drv.c
> create mode 100644 drivers/accel/amdxdna/amdxdna_pci_drv.h
> create mode 100644 drivers/accel/amdxdna/amdxdna_sysfs.c
> create mode 100644 drivers/accel/amdxdna/npu1_regs.c
> create mode 100644 drivers/accel/amdxdna/npu2_regs.c
> create mode 100644 drivers/accel/amdxdna/npu4_regs.c
> create mode 100644 drivers/accel/amdxdna/npu5_regs.c
> create mode 100644 include/trace/events/amdxdna.h
> create mode 100644 include/uapi/drm/amdxdna_accel.h
>
prev parent reply other threads:[~2024-11-11 18:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-11 17:32 Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 01/10] accel/amdxdna: Add documentation for AMD NPU accelerator driver Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 02/10] accel/amdxdna: Add a new driver for AMD AI Engine Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 03/10] accel/amdxdna: Support hardware mailbox Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 04/10] accel/amdxdna: Add hardware resource solver Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 05/10] accel/amdxdna: Add hardware context Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 06/10] accel/amdxdna: Add GEM buffer object management Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 07/10] accel/amdxdna: Add command execution Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 08/10] accel/amdxdna: Add suspend and resume Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 09/10] accel/amdxdna: Add error handling Lizhi Hou
2024-11-11 17:32 ` [PATCH V8 10/10] accel/amdxdna: Add query functions Lizhi Hou
2024-11-11 18:15 ` Lizhi Hou [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=82a0ed11-df10-3525-85c4-dd5a85d17a57@amd.com \
--to=lizhi.hou@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=king.tam@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=max.zhen@amd.com \
--cc=min.ma@amd.com \
--cc=ogabbay@kernel.org \
--cc=quic_jhugo@quicinc.com \
--cc=sonal.santan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®