mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: Pablo Neira Ayuso <pablo@netfilter.org>,
	Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	"David S. Miller" <davem@davemloft.net>,
	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
	James Morris <jmorris@namei.org>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	Patrick McHardy <kaber@trash.net>,
	netfilter-devel@vger.kernel.org, coreteam@netfilter.org,
	bridge@lists.linux-foundation.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] netfilter: Use pr_cont where appropriate
Date: Tue, 28 Feb 2017 14:09:24 -0800	[thread overview]
Message-ID: <82a5ec63e547c425644d2dd0165fcc664a2b265e.1488319732.git.joe@perches.com> (raw)

Logging output was changed when simple printks without KERN_CONT
are now emitted on a new line and KERN_CONT is required to continue
lines so use pr_cont.

Miscellanea:

o realign arguments
o use print_hex_dump instead of a local variant

Signed-off-by: Joe Perches <joe@perches.com>
---
 net/bridge/netfilter/ebt_log.c         | 34 +++++++++++++++++-----------------
 net/ipv4/netfilter/nf_nat_snmp_basic.c | 15 ++-------------
 2 files changed, 19 insertions(+), 30 deletions(-)

diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index 98b9c8e8615e..707caea39743 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -62,10 +62,10 @@ print_ports(const struct sk_buff *skb, uint8_t protocol, int offset)
 		pptr = skb_header_pointer(skb, offset,
 					  sizeof(_ports), &_ports);
 		if (pptr == NULL) {
-			printk(" INCOMPLETE TCP/UDP header");
+			pr_cont(" INCOMPLETE TCP/UDP header");
 			return;
 		}
-		printk(" SPT=%u DPT=%u", ntohs(pptr->src), ntohs(pptr->dst));
+		pr_cont(" SPT=%u DPT=%u", ntohs(pptr->src), ntohs(pptr->dst));
 	}
 }
 
@@ -100,11 +100,11 @@ ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
 
 		ih = skb_header_pointer(skb, 0, sizeof(_iph), &_iph);
 		if (ih == NULL) {
-			printk(" INCOMPLETE IP header");
+			pr_cont(" INCOMPLETE IP header");
 			goto out;
 		}
-		printk(" IP SRC=%pI4 IP DST=%pI4, IP tos=0x%02X, IP proto=%d",
-		       &ih->saddr, &ih->daddr, ih->tos, ih->protocol);
+		pr_cont(" IP SRC=%pI4 IP DST=%pI4, IP tos=0x%02X, IP proto=%d",
+			&ih->saddr, &ih->daddr, ih->tos, ih->protocol);
 		print_ports(skb, ih->protocol, ih->ihl*4);
 		goto out;
 	}
@@ -120,11 +120,11 @@ ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
 
 		ih = skb_header_pointer(skb, 0, sizeof(_iph), &_iph);
 		if (ih == NULL) {
-			printk(" INCOMPLETE IPv6 header");
+			pr_cont(" INCOMPLETE IPv6 header");
 			goto out;
 		}
-		printk(" IPv6 SRC=%pI6 IPv6 DST=%pI6, IPv6 priority=0x%01X, Next Header=%d",
-		       &ih->saddr, &ih->daddr, ih->priority, ih->nexthdr);
+		pr_cont(" IPv6 SRC=%pI6 IPv6 DST=%pI6, IPv6 priority=0x%01X, Next Header=%d",
+			&ih->saddr, &ih->daddr, ih->priority, ih->nexthdr);
 		nexthdr = ih->nexthdr;
 		offset_ph = ipv6_skip_exthdr(skb, sizeof(_iph), &nexthdr, &frag_off);
 		if (offset_ph == -1)
@@ -142,12 +142,12 @@ ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
 
 		ah = skb_header_pointer(skb, 0, sizeof(_arph), &_arph);
 		if (ah == NULL) {
-			printk(" INCOMPLETE ARP header");
+			pr_cont(" INCOMPLETE ARP header");
 			goto out;
 		}
-		printk(" ARP HTYPE=%d, PTYPE=0x%04x, OPCODE=%d",
-		       ntohs(ah->ar_hrd), ntohs(ah->ar_pro),
-		       ntohs(ah->ar_op));
+		pr_cont(" ARP HTYPE=%d, PTYPE=0x%04x, OPCODE=%d",
+			ntohs(ah->ar_hrd), ntohs(ah->ar_pro),
+			ntohs(ah->ar_op));
 
 		/* If it's for Ethernet and the lengths are OK,
 		 * then log the ARP payload
@@ -161,17 +161,17 @@ ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
 			ap = skb_header_pointer(skb, sizeof(_arph),
 						sizeof(_arpp), &_arpp);
 			if (ap == NULL) {
-				printk(" INCOMPLETE ARP payload");
+				pr_cont(" INCOMPLETE ARP payload");
 				goto out;
 			}
-			printk(" ARP MAC SRC=%pM ARP IP SRC=%pI4 ARP MAC DST=%pM ARP IP DST=%pI4",
-					ap->mac_src, ap->ip_src, ap->mac_dst, ap->ip_dst);
+			pr_cont(" ARP MAC SRC=%pM ARP IP SRC=%pI4 ARP MAC DST=%pM ARP IP DST=%pI4",
+				ap->mac_src, ap->ip_src,
+				ap->mac_dst, ap->ip_dst);
 		}
 	}
 out:
-	printk("\n");
+	pr_cont("\n");
 	spin_unlock_bh(&ebt_log_lock);
-
 }
 
 static unsigned int
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index c9b52c361da2..ef49989c93b1 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -998,18 +998,6 @@ static unsigned char snmp_trap_decode(struct asn1_ctx *ctx,
  *
  *****************************************************************************/
 
-static void hex_dump(const unsigned char *buf, size_t len)
-{
-	size_t i;
-
-	for (i = 0; i < len; i++) {
-		if (i && !(i % 16))
-			printk("\n");
-		printk("%02x ", *(buf + i));
-	}
-	printk("\n");
-}
-
 /*
  * Parse and mangle SNMP message according to mapping.
  * (And this is the fucking 'basic' method).
@@ -1026,7 +1014,8 @@ static int snmp_parse_mangle(unsigned char *msg,
 	struct snmp_object *obj;
 
 	if (debug > 1)
-		hex_dump(msg, len);
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_NONE, 16, 1,
+			       msg, len, 0);
 
 	asn1_open(&ctx, msg, len);
 
-- 
2.10.0.rc2.1.g053435c

             reply	other threads:[~2017-02-28 23:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28 22:09 Joe Perches [this message]
2017-03-06 17:02 ` Pablo Neira Ayuso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=82a5ec63e547c425644d2dd0165fcc664a2b265e.1488319732.git.joe@perches.com \
    --to=joe@perches.com \
    --cc=bridge@lists.linux-foundation.org \
    --cc=coreteam@netfilter.org \
    --cc=davem@davemloft.net \
    --cc=jmorris@namei.org \
    --cc=kaber@trash.net \
    --cc=kadlec@blackhole.kfki.hu \
    --cc=kuznet@ms2.inr.ac.ru \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=netfilter-devel@vger.kernel.org \
    --cc=pablo@netfilter.org \
    --cc=stephen@networkplumber.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®