mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yu Kuai <yukuai1@huaweicloud.com>
To: Xiao Ni <xni@redhat.com>, Yu Kuai <yukuai1@huaweicloud.com>
Cc: song@kernel.org, neilb@suse.de, akpm@osdl.org,
	linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
	yi.zhang@huawei.com, yangerkun@huawei.com,
	"yukuai (C)" <yukuai3@huawei.com>
Subject: Re: [PATCH -next v3 6/7] md/raid1-10: don't handle pluged bio by daemon thread
Date: Wed, 31 May 2023 15:55:13 +0800	[thread overview]
Message-ID: <830352e1-ecfa-f5dc-ce7c-349553bd3003@huaweicloud.com> (raw)
In-Reply-To: <CALTww29ixKpcVknNe36D+x=2c1Aw-=z32SP-dJ_Hj8WxL2n4bg@mail.gmail.com>

Hi,

在 2023/05/31 15:50, Xiao Ni 写道:
> On Mon, May 29, 2023 at 9:14 PM Yu Kuai <yukuai1@huaweicloud.com> wrote:
>>
>> From: Yu Kuai <yukuai3@huawei.com>
>>
>> current->bio_list will be set under submit_bio() context, in this case
>> bitmap io will be added to the list and wait for current io submission to
>> finish, while current io submission must wait for bitmap io to be done.
>> commit 874807a83139 ("md/raid1{,0}: fix deadlock in bitmap_unplug.") fix
>> the deadlock by handling plugged bio by daemon thread.
> 
> Thanks for the historic introduction. I did a test and printed the
> logs in raid10_unplug. The tools I used are dd and mkfs. from_schedule
> is always true during I/O and it's 0 when io finishes. So I have a
> question here, how can I trigger the condition that from_schedule is 0
> and current->list is not NULL? In other words, is there really a
> deadlock here? Before your patch it looks like all bios are merged
> into conf->pending_bio_list and are handled by raid10d. It can't
> submit bio directly in the originating process which mentioned in
> 57c67df48866
> 
As I mentioned below, after commit a214b949d8e3, this deadlock doesn't
exist anymore, and without this patch, patch 7 will introduce this
scenario again.

Thanks,
Kuai
>>
>> On the one hand, the deadlock won't exist after commit a214b949d8e3
>> ("blk-mq: only flush requests from the plug in blk_mq_submit_bio"). On
>> the other hand, current solution makes it impossible to flush plugged bio
>> in raid1/10_make_request(), because this will cause that all the writes
>> will goto daemon thread.
>>
>> In order to limit the number of plugged bio, commit 874807a83139
>> ("md/raid1{,0}: fix deadlock in bitmap_unplug.") is reverted, and the
>> deadlock is fixed by handling bitmap io asynchronously.
>>
>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>> ---
>>   drivers/md/raid1-10.c | 14 ++++++++++++++
>>   drivers/md/raid1.c    |  4 ++--
>>   drivers/md/raid10.c   |  8 +++-----
>>   3 files changed, 19 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/md/raid1-10.c b/drivers/md/raid1-10.c
>> index 73cc3cb9154d..17e55c1fd5a1 100644
>> --- a/drivers/md/raid1-10.c
>> +++ b/drivers/md/raid1-10.c
>> @@ -151,3 +151,17 @@ static inline bool raid1_add_bio_to_plug(struct mddev *mddev, struct bio *bio,
>>
>>          return true;
>>   }
>> +
>> +/*
>> + * current->bio_list will be set under submit_bio() context, in this case bitmap
>> + * io will be added to the list and wait for current io submission to finish,
>> + * while current io submission must wait for bitmap io to be done. In order to
>> + * avoid such deadlock, submit bitmap io asynchronously.
>> + */
>> +static inline void raid1_prepare_flush_writes(struct bitmap *bitmap)
>> +{
>> +       if (current->bio_list)
>> +               md_bitmap_unplug_async(bitmap);
>> +       else
>> +               md_bitmap_unplug(bitmap);
>> +}
>> diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
>> index 0778e398584c..006620fed595 100644
>> --- a/drivers/md/raid1.c
>> +++ b/drivers/md/raid1.c
>> @@ -794,7 +794,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
>>   static void flush_bio_list(struct r1conf *conf, struct bio *bio)
>>   {
>>          /* flush any pending bitmap writes to disk before proceeding w/ I/O */
>> -       md_bitmap_unplug(conf->mddev->bitmap);
>> +       raid1_prepare_flush_writes(conf->mddev->bitmap);
> 
> If we unplug bitmap asynchronously, can we make sure the bitmap are
> flushed before the corresponding data?
> 
> Regards
> Xiao
> 
>>          wake_up(&conf->wait_barrier);
>>
>>          while (bio) { /* submit pending writes */
>> @@ -1166,7 +1166,7 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
>>          struct r1conf *conf = mddev->private;
>>          struct bio *bio;
>>
>> -       if (from_schedule || current->bio_list) {
>> +       if (from_schedule) {
>>                  spin_lock_irq(&conf->device_lock);
>>                  bio_list_merge(&conf->pending_bio_list, &plug->pending);
>>                  spin_unlock_irq(&conf->device_lock);
>> diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
>> index 6640507ecb0d..fb22cfe94d32 100644
>> --- a/drivers/md/raid10.c
>> +++ b/drivers/md/raid10.c
>> @@ -902,9 +902,7 @@ static void flush_pending_writes(struct r10conf *conf)
>>                  __set_current_state(TASK_RUNNING);
>>
>>                  blk_start_plug(&plug);
>> -               /* flush any pending bitmap writes to disk
>> -                * before proceeding w/ I/O */
>> -               md_bitmap_unplug(conf->mddev->bitmap);
>> +               raid1_prepare_flush_writes(conf->mddev->bitmap);
>>                  wake_up(&conf->wait_barrier);
>>
>>                  while (bio) { /* submit pending writes */
>> @@ -1108,7 +1106,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
>>          struct r10conf *conf = mddev->private;
>>          struct bio *bio;
>>
>> -       if (from_schedule || current->bio_list) {
>> +       if (from_schedule) {
>>                  spin_lock_irq(&conf->device_lock);
>>                  bio_list_merge(&conf->pending_bio_list, &plug->pending);
>>                  spin_unlock_irq(&conf->device_lock);
>> @@ -1120,7 +1118,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
>>
>>          /* we aren't scheduling, so we can do the write-out directly. */
>>          bio = bio_list_get(&plug->pending);
>> -       md_bitmap_unplug(mddev->bitmap);
>> +       raid1_prepare_flush_writes(mddev->bitmap);
>>          wake_up(&conf->wait_barrier);
>>
>>          while (bio) { /* submit pending writes */
>> --
>> 2.39.2
>>
> 
> .
> 


  reply	other threads:[~2023-05-31  7:57 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-29 13:10 [PATCH -next v3 0/7] limit the number of plugged bio Yu Kuai
2023-05-29 13:11 ` [PATCH -next v3 1/7] md/raid10: prevent soft lockup while flush writes Yu Kuai
2023-05-29 13:11 ` [PATCH -next v3 2/7] md/raid1-10: factor out a helper to add bio to plug Yu Kuai
2023-05-29 13:11 ` [PATCH -next v3 3/7] md/raid1-10: factor out a helper to submit normal write Yu Kuai
2023-05-31  7:20   ` Xiao Ni
2023-05-31  7:56     ` Yu Kuai
2023-05-29 13:11 ` [PATCH -next v3 4/7] md/raid1-10: submit write io directly if bitmap is not enabled Yu Kuai
2023-05-31  7:26   ` Xiao Ni
2023-05-31  8:25     ` Yu Kuai
2023-05-31 15:19       ` Xiao Ni
2023-05-29 13:11 ` [PATCH -next v3 5/7] md/md-bitmap: add a new helper to unplug bitmap asynchrously Yu Kuai
2023-06-06 17:34   ` Song Liu
2023-05-29 13:11 ` [PATCH -next v3 6/7] md/raid1-10: don't handle pluged bio by daemon thread Yu Kuai
2023-05-31  7:50   ` Xiao Ni
2023-05-31  7:55     ` Yu Kuai [this message]
2023-05-31  8:00       ` Xiao Ni
2023-05-31  8:06         ` Yu Kuai
2023-05-31 15:23           ` Xiao Ni
2023-05-31  7:57   ` Paul Menzel
2023-05-29 13:11 ` [PATCH -next v3 7/7] md/raid1-10: limit the number of plugged bio Yu Kuai
2023-05-31 15:42   ` Xiao Ni
2023-06-01  1:41     ` Yu Kuai
2023-06-06 21:54 ` [PATCH -next v3 0/7] " Song Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=830352e1-ecfa-f5dc-ce7c-349553bd3003@huaweicloud.com \
    --to=yukuai1@huaweicloud.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=song@kernel.org \
    --cc=xni@redhat.com \
    --cc=yangerkun@huawei.com \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®